Abstract
The inhabitation behavior of adenine for 304 and 316 stainless steels (SS) in 1 N hydrochloric acid solution at ambient temperature was studied using weight loss, electrochemical methods and surface characterization. Result showed the corrosion rate of stainless steel significantly is reduced by addition of 70 mg/L adenine with maximum inhibitation efficiency of 83 and 65 percent for 304 and 316 SS, respectively. The potentiodynamic investigation demonstrated the studied inhibitor acting as a mix type inhibitor with the predominant of anodic inhibitation. EIS studies indicated a main increase in polarization resistance after adenine addition. The surface morphology and EDS analysis of specimens after exposure to acidic solution with and without inhibitor exhibited the material surface are protected by formation of protective film layer. Adsorption of adenine inhibitor on 304 and 316 SS was found in accordance with Langmuir adsorption isotherm, and isotherm parameters including Kads and ΔGads0 were determined in ambient temperature.
Similar content being viewed by others
References
T. Michler, Austenitic stainless steels. Reference Module Mater. Sci. Mater. Eng. 1, 6 (2016)
J.W. Morris, Encyclopedia of Materials: Science and Technology (2011), pp. 398–401
J.H. Potgieter, F.V. Adams, N. Maledi, J. Van Der Merwe, P.A. Olubambi, Corrosion resistance of type 444 ferritic stainless steel in acidic chloride media. J. Chem. Mater. Sci 2, 37–48 (2012)
R.T. Loto, C.A. Loto, T. Fedotova, Inhibition effect of N, N’-Dimethylaminoethanol on the corrosion of austenitic stainless steel type 304. Int. J. Electrochem. Sci. 7, 10763–10778 (2012)
M. Scendo, J. Trela, Adenine as an effective corrosion inhibitor for stainless steel in chloride solution. Int. J. Electrochem. Sci. 8, 9201–9221 (2013)
G.T. Burstein, C. Liu, R.M. Souto, S.P. Vines, Origins of pitting corrosion. Corros. Eng., Sci. Technol. 39(1), 25–30 (2004)
G.S. Frankel, N. Sridhar, Understanding localized corrosion. Mater. Today 11(10), 38–44 (2008)
M.G. Fontana, Corrosion Engineering, 3rd edn. (McGraw-Hill Book Co., New York, 1987)
G.T. Burstein, P.C. Pistorius, S.P. Mattin, The nucleation and growth of corrosion pits on stainless steel. Corros. Sci. 35(1–4), 57–62 (1993)
P.C. Pistorius, G.T. Burstein, “Metastable pitting corrosion of stainless steel and the transition to stability”, philosophical transactions of the royal society of London. Series: Phys. Eng. Sci. 341(1662), 531–559 (1992)
A. Pardo, M.C. Merino, A.E. Coy, F. Viejo, R. Arrabal, E. Matykina, Effect of Mo and Mn additions on the corrosion behaviour of AISI 304 and 316 stainless steels in H2SO4. Corros. Sci. 50(3), 780–794 (2008)
M.A. Deyab, S.T. Keera, S.M. El Sabagh, Chlorhexidine digluconate as corrosion inhibitor for carbon steel dissolution in emulsified diesel fuel. Corros. Sci. 53(8), 2592–2597 (2011)
M.A. Deyab, Adsorption and inhibition effect of Ascorbyl palmitate on corrosion of carbon steel in ethanol blended gasoline containing water as a contaminant. Corros. Sci. 80, 359–365 (2014)
A.I. Adawy, M.A. Abbas, K. Zakaria, A green organocatalyzed one-pot protocol for the efficient synthesis of newly substituted pyrimido [4, 5-d] pyrimidinones using a Biginelli-like reaction. Res. Chem. Intermed 42(4), 8185–8200 (2016)
A.E.-A.S. Fouda, A.M. El-Azaly, Expired concor drug as potential nontoxic corrosion inhibitor for 304 stainless steel in hydrochloric acid solution. Zaštita materijala 59(2), 226–236 (2018)
K. Varga, P. Baradlai, W.O. Barnard, G. Myburg, P. Halmos, J.H. Potgieter, Comparative study of surface properties of austenitic stainless steels in sulfuric and hydrochloric acid solutions. Electrochim. Acta 42(1), 25–35 (1997)
F.B. Mainier, H.N. Farneze, L.F. Serrão, B.T. Oliveira, B.F. Nani, Performance of stainless steel AISI 317L in Hydrochloric acid with the addition of propargyl alcohol. Int. J. Electrochem. Sci. 13(4), 3372–3381 (2018)
G. Lorang, M.D.C. Belo, A.M.P. Simoes, M.G.S. Ferreira, Chemical composition of passive films on AISI 304 stainless steel. J. Electrochem. Soc. 141(12), 3347 (1994)
M. Abdallah, Rhodanine azosulpha drugs as corrosion inhibitors for corrosion of 304 stainless steel in hydrochloric acid solution. Corros. Sci. 44(4), 717–728 (2002)
M. Abdallah, Corrosion behaviour of 304 stainless steel in sulphuric acid solutions and its inhibition by some substituted pyrazolones. Mater. Chem. Phys. 82(3), 786–792 (2003)
N.O. Obi-Egbedi, I.B. Obot, M.I. El-Khaiary, Quantum chemical investigation and statistical analysis of the relationship between corrosion inhibition efficiency and molecular structure of xanthene and its derivatives on mild steel in sulphuric acid. J. Mol. Struct. 1002(1–3), 86–96 (2011)
P. Selvakumar, B.B. Karthik, C. Thangavelu, Corrosion inhibition study of stainless steel in acidic medium–an overview. Res. J. Chem. Sci. ISSN 2231, 606X (2013)
B. E. Rani and B. B. J. Basu, “Green inhibitors for corrosion protection of metals and alloys: an overview.” Int. J. Corrosion. 2012:1, 2012.
S.M.A. Hosseini, A. Azimi, I. Sheikhshoaei, M. Salari, Corrosion inhibition of 302 stainless steel with schiff base compounds. J. Iran. Chem. Soc. 7(4), 799–806 (2010)
S.M.A. Hosseini, M. Salari, Corrosion inhibition of stainless steel 302 by 1-methyl-3-pyridine-2-Yl–thiourea in acidic media. Indian J. Chem. Technol. 16, 480–485 (2009)
R. Herle, P. Shetty, S.D. Shetty, U.A. Kini, Corrosion inhibition of 304 SS in hydrochloric acid solution by N-Furfuryl N’-Phenyl Thiourea. Port. Electrochim. Acta 29(2), 69–78 (2011)
M.K. Devi, F.R. Selvarani, Benzyl triethylammonium chloride as an inhibitor for the corrosion of 430 stainless steel in HCl solutions. Int. J. Sci. Technol. Res 3, 276–279 (2014)
A.S. Fouda, K. Shalabi, N.H. Mohamed, Corrosion inhibition of aluminum in hydrochloric acid solutions using some chalcone derivatives. Int. J. Innovative Res. Sci. Eng. Technol. 3(3), 9861–9875 (2014)
F.M. Al-Kharafi, F.H. Al-Hajjar, A. Katrib, Inhibition by heterocyclic compounds of corrosion of copper. Corros. Sci. 30(8–9), 869–875 (1990)
G. Gao, C. Liang, Electrochemical and DFT studies of β-amino-alcohols as corrosion inhibitors for brass. Electrochim. Acta 52(13), 4554–4559 (2007)
W.J. Whelan, Vitamin B4. IUBMB Life 57(2), 125 (2005)
N. Zeng, H. Zhao, C. Luo, Y. Liu, C. Wang, T. Ma, W. Wang, Roles and mechanistic analysis of adenine as a green inhibitor in chemical mechanical polishing. J. Appl. Electrochem. 1, 1–11 (2021)
A.M. Abdel-Gaber, M.S. Masoud, E.A. Khalil, E.E. Shehata, Electrochemical study on the effect of Schiff base and its cobalt complex on the acid corrosion of steel. Corros. Sci. 51(12), 3021–3024 (2009)
G. Avci, Corrosion inhibition of indole-3-acetic acid on mild steel in 0.5 M HCl. Colloids Surf., A 317(1–3), 730–736 (2008)
H. Cen, X. Zhang, L. Zhao, Z. Chen, X. Guo, Carbon dots as effective corrosion inhibitor for 5052 aluminium alloy in 0.1 M HCl solution. Corros. Sci. 161, 108197 (2019)
R. Solmaz, G. Kardaş, M. Çulha, B. Yazıcı, M. Erbil, Investigation of adsorption and inhibitive effect of 2-mercaptothiazoline on corrosion of mild steel in hydrochloric acid media. Electrochim. Acta 53(20), 5941–5952 (2008)
R. Rosliza, H.B. Senin, W.B.W. Nik, Electrochemical properties and corrosion inhibition of AA6061 in tropical seawater. Colloids Surf., A 312(2–3), 185–189 (2008)
K.F. Khaled, N. Hackerman, Ortho-substituted anilines to inhibit copper corrosion in aerated 0.5 M hydrochloric acid. Electrochim. Acta 49(3), 485–495 (2004)
Q. Qu, Z. Hao, L. Li, W. Bai, Y. Liu, Z. Ding, Synthesis and evaluation of Tris-hydroxymethyl-(2-hydroxybenzylidenamino)-methane as a corrosion inhibitor for cold rolled steel in hydrochloric acid. Corros. Sci. 51(3), 569–574 (2009)
M.P. Desimone, G. Grundmeier, G. Gordillo, S.N. Simison, Amphiphilic amido-amine as an effective corrosion inhibitor for mild steel exposed to CO2 saturated solution: polarization, EIS and PM-IRRAS studies. Electrochim. Acta 56(8), 2990–2998 (2011)
G. Avci, Inhibitor effect of N, N′-methylenediacrylamide on corrosion behavior of mild steel in 0.5 M HCl. Mater. Chem. Phys. 112(1), 234–238 (2008)
Q.B. Zhang, Y.X. Hua, Corrosion inhibition of mild steel by alkylimidazolium ionic liquids in hydrochloric acid. Electrochim. Acta 54(6), 1881–1887 (2009)
A.S. Fouda, A.S. Ellithy, Inhibition effect of 4-phenylthiazole derivatives on corrosion of 304L stainless steel in HCl solution. Corros. Sci. 51(4), 868–875 (2009)
S. Sankarapapavinasam, M.F. Ahmed, Benzenethiols as inhibitors for the corrosion of copper. J. Appl. Electrochem. 22(4), 390–395 (1992)
M. Christov, A. Popova, Adsorption characteristics of corrosion inhibitors from corrosion rate measurements. Corros. Sci. 46(7), 1613–1620 (2004)
F.M. Donahue, K. Nobe, Theory of organic corrosion inhibitors: adsorption and linear free energy relationships. J. Electrochem. Soc. 112(9), 886 (1965)
Acknowledgements
The authors would like to thank the supports from Ilam University.
Author information
Authors and Affiliations
Corresponding author
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Roushani, M., Veysi, A. & Najafi, H. Investigation of adenine inhibitor on corrosion behavior of AISI 304 and 316 stainless steel in 1 N HCl solution. J IRAN CHEM SOC 20, 207–215 (2023). https://doi.org/10.1007/s13738-022-02654-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13738-022-02654-0