Advertisement

In situ Bi2O3-loaded polypyrrole nanocomposites for carbon dioxide gas sensing

  • Ashish R. Choudhary
  • Sandeep A. WaghuleyEmail author
Original Research
  • 10 Downloads

Abstract

In the present work, an attempt has been made to detect carbon dioxide (CO2) using an in situ-loaded Bi2O3–polypyrrole nanocomposite sensor. The polypyrrole (PPy) was prepared by oxidative polymerization method from precursor’s monomer pyrrole and aqueous solution of ammonium persulphate. The prepared nanocomposites were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), ultraviolet–visible spectroscopy (UV–Vis), thermogravimetric–differential thermal analysis (TG–DTA) and Raman spectroscopy. Thick films of the synthesized PPy nanocomposites were deposited on glass substrate by screen printing technique. Resistive type gas sensors are extensively used in a number of modern applications such as emission control and energy efficiency. By considering this view, PPy nanocomposite films were prepared for gas sensing application. The XRD analysis revealed amorphous nature. The SEM micrograph showed that nanocomposite particles have irregular morphology and size. The nanocomposites showed a good sensing performance toward CO2 gas. The highest value of CO2 gas sensing response was shown by 25 wt% Bi2O3-loaded PPy nanocomposite sample (S5), which was found to be 0.065 for 50 ppm. Operating temperature for the optimized sample S5 toward CO2 gas was found to be 363 K. Similarly, the optimized sample S5 showed an excellent stability response against CO2 gas and atmospheric change for 30 days.

Keywords

Bi2O3 Polypyrrole Film deposition Carbon dioxide Gas sensing 

Notes

Acknowledgements

Authors are very much thankful to the Head, Department of Physics, Sant Gadge Baba Amravati University, Amravati, India, for providing necessary facilities.

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

References

  1. 1.
    Weng S, Zhou J, Lin Z (2010) Preparation of one-dimensional (1D) polyaniline–polypyrrole coaxial nanofibers and their application in gas sensor. Synth Met 160:1136–1142CrossRefGoogle Scholar
  2. 2.
    Mude KM, Mude BM, Yenorkar SM, Mistry RR, Zade RN, Yawale SP (2018) Study of CO2 gas sensor by doping nanoCuO in conducting polymer polyaniline. Int J Univers Sci Technol 3:352–358Google Scholar
  3. 3.
    Mustapa R, Mansor ZIA, Sambasevam KP (2018) Fabrication of polyaniline based chemical sensor for ammonia gas detection. J Phys Sci 29:9–16CrossRefGoogle Scholar
  4. 4.
    Tembhe JA, Waghuley SA (2018) Synthesis and gas sensing application of conducting polymer-polythiophene nanocomposite. Int J Curr Eng Sci Res 5:182–186Google Scholar
  5. 5.
    Mude KM, Mude BM, Raulkar KB, Yawale SS, Yawale SP (2017) Conducting polymer polyaniline as CO2 gas sensor. Int J Chem Technol Res 10:494–500Google Scholar
  6. 6.
    Soroudi A, Skrifvars M (2010) Melt blending of carbon nanotubes/polyaniline/polypropylene compounds and their melt spinning to conductive fibres. Synth Met 160:1143–1147CrossRefGoogle Scholar
  7. 7.
    Chougule MA, Sen S, Patil VB (2012) Polypyrrole–ZnO hybrid sensor: effect of camphor sulfonic acid doping on physical and gas sensing properties. Synth Met 162:1598–1603CrossRefGoogle Scholar
  8. 8.
    Navale ST, Mane AT, Chougule MA, Sakhare RD, Nalage SR, Patil VB (2014) Highly selective and sensitive room temperature NO2 gas sensor based on polypyrrole thin films. Synth Met 189:94–99CrossRefGoogle Scholar
  9. 9.
    Pandey S (2016) Highly sensitive and selective chemiresistor gas/vapor sensors based on polyaniline nanocomposite: a comprehensive review. J Sci Adv Mater Device 1:431–453CrossRefGoogle Scholar
  10. 10.
    Doan TCD, Baggerman J, Ramaneti R, Tong HD, Marcelis ATM, van Rijna CJM (2014) Carbon dioxide detection with polyethylenimine blended with polyelectrolytes. Sens Actuator B Chem 201:452–459CrossRefGoogle Scholar
  11. 11.
    Pandey S, Nanda KK (2016) Au nanocomposite based chemiresistive ammonia sensor for health monitoring. ACS Sens 1:55–62CrossRefGoogle Scholar
  12. 12.
    Suri K, Annapoorni S, Sarkar AK, Tandon RP (2002) Gas and humidity sensor based on iron oxide and polypyrrole nanocomposites. Sens Actuator B Chem 81:277–282CrossRefGoogle Scholar
  13. 13.
    Zhang L, Meng F, Chen Y, Liu J, Sun Y, Luo T, Li M, Liu J (2009) A novel ammonia sensor based on high density small diameter polypyrrole nanowire arrays. Sens Actuator B Chem 142:204–209CrossRefGoogle Scholar
  14. 14.
    Pirsa S, Alizadeh N (2010) Design and fabrication of gas sensor based on nanostructure conductive polypyrrole for determination of volatile organic solvents. Sens Actuator B Chem 147:461–466CrossRefGoogle Scholar
  15. 15.
    Waghuley SA, Yenorka SM, Yawale SS, Yawale S (2007) SnO2/PPy screen-printed multilayer CO2 gas sensor. Sens Transducers J 79:1180–1185Google Scholar
  16. 16.
    He H, Li W, Lamson M, Zhong M, Konkolewicz D, Hui CM, Yaccato K, Rappold T, Sugar G, David NE, Damodaran K, Natesakhawat S, Nulwala H, Matyjaszewski K (2014) Porous polymers prepared via high internal phase emulsion polymerization for reversible CO2 capture. Polymer 55:385–394CrossRefGoogle Scholar
  17. 17.
    Dinari M, Ahmadizadegan H (2014) Synthesis, structural characterization and properties of novel functional poly(ether imide)/titania nanocomposite thin films. Polymer 55:6252–6260CrossRefGoogle Scholar
  18. 18.
    Wu Z, Chen X, Zhu S, Zhou Z, Yao Y, Quan W, Liu B (2013) Enhanced sensitivity of ammonia sensor using graphene/polyaniline nanocomposite. Sens Actuator B Chem 178:485–493CrossRefGoogle Scholar
  19. 19.
    Do JS, Wang SH (2013) On the sensitivity of conductimetric acetone gas sensor based on polypyrrole and polyaniline conducting polymers. Sens Actuator B Chem 185:39–46CrossRefGoogle Scholar
  20. 20.
    Patois T, Sanchez JB, Berger F, Rauch JY, Fievet P, Lakard B (2012) Ammonia gas sensors based on polypyrrole films: influence of electrodeposition parameters. Sens Actuator B Chem 171–172:431–439CrossRefGoogle Scholar
  21. 21.
    Nemade KR, Waghuley SA (2013) Chemiresistive gas sensing by few-layered graphene. J Electron Mater 42:2857–2866CrossRefGoogle Scholar
  22. 22.
    Brezoi DV, Ion RM (2005) Phase evolution induced by polypyrrole in iron oxide–polypyrrole nanocomposite. Sens Actuator B Chem 109:171–175CrossRefGoogle Scholar
  23. 23.
    He YJ (2005) Synthesis of polyaniline/nano-CeO2 composite microspheres via a solid-stabilized emulsion route. Mater Chem Phys 92:134–137CrossRefGoogle Scholar
  24. 24.
    Xia H, Wang Q (2002) Ultrasonic irradiation: a novel approach to prepare conductive polyaniline/nanocrystalline titanium oxide composites. Chem Mater 14:2158–2165CrossRefGoogle Scholar
  25. 25.
    Geng L, Wu S (2013) Preparation, characterization and gas sensitivity of polypyrrole/γ-Fe2O3 hybrid materials. Mater Res Bull 48:4339–4343CrossRefGoogle Scholar
  26. 26.
    Crowley K, Cassidy J (2003) In situ resonance Raman spectroelectrochemistry of polypyrrole doped with dodecylbenzenesulfonate. J Electroanal Chem 547:75–82CrossRefGoogle Scholar
  27. 27.
    Furukawa Y, Tazawa S, Fujii Y, Harada I (1998) Raman spectra of polypyrrole and its 2,5-13C-substituted and C-deuterated analogues in doped and undoped states. Synth Met 24:329–341CrossRefGoogle Scholar
  28. 28.
    Nemade KR, Waghuley SA (2014) Highly responsive carbon dioxide sensing by graphene/Al2O3 quantum dots composites at low operable temperature. Indian J Phys 88:577–583CrossRefGoogle Scholar
  29. 29.
    Nemade KR, Waghuley SA (2013) Study of cerium doped polyaniline composites for resistive type CO2 gas detection. Walailak J Sci Technol 11:763–767Google Scholar
  30. 30.
    Nenov TG, Yordanov SP (1996) Ceramic sensors, technology and applications. Technomic Publishers, LancasterGoogle Scholar
  31. 31.
    Nemade KR, Waghuley SA (2013) LPG sensing application of graphene/Bi2O3 quantum dots composites. Solid State Sci 22:27–32CrossRefGoogle Scholar
  32. 32.
    Huixia L, Yong L, Lanlan L, Yanni T, Qing Z, Kun L (2016) Development of ammonia sensors by using conductive polymer/hydroxyapatite composite materials. Mater Sci Eng 59:438–444CrossRefGoogle Scholar

Copyright information

© Iran Polymer and Petrochemical Institute 2019

Authors and Affiliations

  1. 1.Department of PhysicsH.V.P.M. College of Engineering and TechnologyAmravatiIndia
  2. 2.Department of PhysicsSant Gadge Baba Amravati UniversityAmravatiIndia

Personalised recommendations