References
P. Ludwik, The meaning of the flow and rupture resistance in material testing. Z. Ver. Dtsch. Ing. 71, 1532–1538 (1927). Elements der Technologischen Mechanik (Julius Springer, Berlin, 1909)
R. von Mises, Mechanik der Festen Korper in Plastisch-Deformablen Zustand. Wrot. Goettingen, Math. Phys. Klasse 582–597 (1913). M. Gensamer, Strength of Metals Under Combined Stresses (American Society for Metals, Materials Park, 1941)
P.S. Sakharov, Determination of brittle strength. J. Tech. Phys. (U.S.S.R) 6, 1381 (1936). (Russian). J.H. Hollomon, C. Zener, Conditions of fracture in steel. Met. Technol. (1944)
C. Zener, J.H. Hollomon, Plastic flow and rupture of metals. Trans. Am. Soc. Metals 33, 186 (1944)
C.W. MacGregor, Relations between stress and reduction in area for tensile tests of metals. Trans. Am. Inst. Min. Metall. Eng. 124, 208 (1937). P.W. Bridgman, The stress distribution at the neck of a tensile specimen. Trans. Am. Soc. Met. 32, 553–572 (1944)
C. Lacy, M. Gensamer, The tensile properties of alloyed ferrites. Trans. Am. Soc. Met. 32, 88–105 (1944)
M. Gensamer, E.B. Pearsall, W.S. Pellini, J.R. Low Jr., The tensile properties of pearlite, bainite and spheroidite. Trans. Am. Soc. Met. 30, 983 (1942)
J.R. Low, Jr., T.A. Prater, Final report on plastic flow of aluminum aircraft sheet under combined loads—2. OSRD Report No. 4052, August 22 (1944). J.H. Hollomon, Tensile deformation. Trans. Am. Inst. Min. Metall. Eng. Iron Steel Div. 162, 268–290 (1945)
E.J. Janitzky, M. Baeyertz, The marked similarity in tensile properties of several heat treated S.A.E. steels, in: Metals Handbook (American Society for Metals, Materials Park, 1939), p. 515
N. Davidenkov, F. Wittman, Mechanical analysis of impact brittleness. Tech. Phys. 4, 308–324 (1937). (English)
C.W. MacGregor, J.C. Fisher, Relations between the notched beam impact test and the static tension test. J. Appl. Mech. 111, A28–A33 (1944)
Additional information
Reprinted from Transactions of the American Society for Metals, 36, 30–60 (1946). Copyright 1946 by the American Society for Metals, Cleveland, Ohio.
Rights and permissions
About this article
Cite this article
Gensamer, M. Strength and Ductility. Metallogr. Microstruct. Anal. 6, 171–185 (2017). https://doi.org/10.1007/s13632-017-0341-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13632-017-0341-1