Abstract
In this study, molecular dynamics (MD) simulation is used to investigate the effect of Fe2O3 nanoparticles (NPs) on the structural and thermomechanical properties of poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA) nanocomposites. Five molecular models of pure PHPMA and PHPMA/Fe2O3 nanocomposites with different NP sizes and concentrations were constructed and analyzed. The dynamics of the various models were investigated using mean square displacement (MSD), and their glass transition temperature (Tg) was estimated using both density-temperature and MSD evaluation methods. The results reveal that the presence of Fe2O3 NPs enhances the molecular mobility and flexibility of polymer chains within the PHPMA matrix and decreases their Tg. Additionally, the introduction of Fe2O3 NPs significantly reduces the mechanical properties, such as Young’s and bulk modulus, of the PHPMA polymer. Furthermore, the study demonstrates that the impact of NPs on polymer properties is strongly influenced by NP features; an increase in NP size and concentration correlates with enhanced molecular mobility and flexibility, while Tg and mechanical properties exhibit a negative correlation with these parameters. These findings offer valuable insights into the influence of Fe2O3 nanoparticles on the structural and thermomechanical properties of PHPMA nanocomposites, providing a foundation for optimizing their design and applications across various fields.
Similar content being viewed by others
References
A. Samir, F. Ashour, A. Hakim, M. Bassyouni, Recent advances in biodegradable polymers for sustainable applications. NPJ Mater. Degrad. 6(1), 68 (2022). https://doi.org/10.1038/s41529-022-00277-7
M.S.A. Darwish, M.H. Mostafa, L.M. Al-Harbi, Polymeric nanocomposites for environmental and industrial applications. Int. J. Mol. Sci. 23(3), 1023 (2022). https://doi.org/10.3390/ijms23031023
H. Wu, W.P. Fahy, S. Kim, H. Kim, N. Zhao, L. Pilato, J.H. Koo, Recent developments in polymers/polymer nanocomposites for additive manufacturing. Prog. Mater. Sci. 111, 100638 (2020). https://doi.org/10.1016/j.pmatsci.2020.100638
W. Gacitua, A. Ballerini, J. Zhang, Polymer nanocomposites: synthetic and natural fillers a review. Maderas. Cienc. y Tecnol. 7(3), 159–178 (2005). https://doi.org/10.4067/S0718-221X2005000300002
V.M. Bouch Er, D. Cangialosi, A. Alegría, J. Colmenero, I. Pastoriza-Santos, L.M. Liz-Marzan, Physical aging of polystyrene/gold nanocomposites and its relation to the calorimetric T g depression. Soft Matter 7(7), 3607–36202011 (2011). https://doi.org/10.1039/C0SM01326A
S.P. Delcambre, R.A. Riggleman, J.J. de Pablo, P.F. Nealey, Mechanical properties of antiplasticized polymer nanostructures. Soft Matter 6(11), 2475–2483 (2010). https://doi.org/10.1039/B926843J
W. Caseri, Nanocomposites of polymers and metals or semiconductors: historical background and optical properties. Macromol. Rapid Commun. 21(11), 705–722 (2000). https://doi.org/10.1002/1521-3927(20000701)21:11%3C705::AID-MARC705%3E3.0.CO;2-3
M.E. Mackay, T.T. Dao, A. Tuteja, D.L. Ho, B. Van Horn, H.C. Kim, C.J. Hawker, Nanoscale effects leading to non-Einstein-like decrease in viscosity. Nat. Mater. 2(11), 762–766 (2003). https://doi.org/10.1038/nmat999
C. Jiang, S. Markutsya, Y. Pikus, V.V. Tsukruk, Freely suspended nanocomposite membranes as highly sensitive sensors. Nat. Mater. 3(10), 721–728 (2004). https://doi.org/10.1038/nmat1212
J. Zhu, F.M. Uhl, A.B. Morgan, C.A. Wilkie, Studies on the mechanism by which the formation of nanocomposites enhances thermal stability. Chem. Mater. 13(12), 4649–4654 (2001). https://doi.org/10.1021/cm010451y
G. Polizos, E. Tuncer, A.L. Agapov, D. Stevens, A.P. Sokolov, M.K. Kidder, I. Sauers, Effect of polymer–nanoparticle interactions on the glass transition dynamics and the conductivity mechanism in polyurethane titanium dioxide nanocomposites. Polymer 53(2), 595–603 (2012). https://doi.org/10.1016/j.polymer.2011.11.050
V.V. Zuev, Y.G. Ivanova, Mechanical and electrical properties of polyamide-6-based nanocomposites reinforced by fulleroid fillers. Polym. Eng. Sci. 52(6), 1206–1211 (2012). https://doi.org/10.1002/pen.22188
K. Wattanakul, H. Manuspiya, N. Yanumet, Effective surface treatments for enhancing the thermal conductivity of BN-filled epoxy composite. J. Appl. Polym. Sci. 119(6), 3234–3243 (2011). https://doi.org/10.1002/app.32889
Y. Zhang, S. Park, In-situ modification of nanodiamonds by mercapto-terminated silane agent for enhancing the mechanical interfacial properties of nitrile butadiene rubber nanocomposites. Polym. Compos. 39(10), 3472–3481 (2018). https://doi.org/10.1002/pc.24367
J. Lu, D. Liu, X. Yang, Y. Zhao, H. Liu, H. Tang, F. Gui, Molecular dynamics simulations of interfacial interactions between small nanoparticles during diffusion-limited aggregation. Appl. Surf. Sci. 357, 1114–1121 (2015). https://doi.org/10.1016/j.apsusc.2015.09.142
J. Wang, T. Hou, Application of molecular dynamics simulations in molecular property prediction II: diffusion coefficient. J. Comput. Chem. 32(16), 3505–3519 (2011). https://doi.org/10.1002/jcc.21939
C. Li, A. Strachan, Molecular scale simulations on thermoset polymers: a review. J. Polym. Sci. part B Polym. Phys. 53(2), 103–122 (2015). https://doi.org/10.1002/polb.23489
H.A.L. Filipe, L.M.S. Loura, Molecular dynamics simulations: advances and applications. Mol. 27(7), 2105 (2022). https://doi.org/10.3390/molecules27072105
Q. Wei, Y. Zhang, Y. Wang, M. Yang, A molecular dynamic simulation method to elucidate the interaction mechanism of nano-SiO2 in polymer blends. J. Mater. Sci. 52(21), 12889–12901 (2017). https://doi.org/10.1007/s10853-017-1330-0
Y. Wang, W. Wang, Z. Zhang, L. Xu, P. Li, Study of the glass transition temperature and the mechanical properties of PET/modified silica nanocomposite by molecular dynamics simulation. Eur. Polym. J. 75, 36–45 (2016). https://doi.org/10.1016/j.eurpolymj.2015.11.038
M. Nematollahi, A. Jalali-Arani, K. Golzar, H. Modarress, Investigation of nanoparticle–polymer interaction in bio-based nanosilica-filled PLA/NR nanocomposites: molecular dynamics simulation. J. Mol. Model. 26, 1–20 (2020). https://doi.org/10.1007/s00894-020-04431-3
Q. Xie, K. Fu, S. Liang, B. Liu, L. Lu, X. Yang, F. Lü, Micro-structure and thermomechanical properties of crosslinked epoxy composite modified by nano-SiO2: a molecular dynamics simulation. Polymers (Basel). 10(7), 801 (2018). https://doi.org/10.3390/polym10070801
Z. Novy, V. Lobaz, M. Vlk, J. Kozempel, P. Stepanek, M. Popper, M. Petrik, Head-to-head comparison of biological behavior of biocompatible polymers poly (ethylene oxide), poly (2-ethyl-2-oxazoline) and poly [N-(2-hydroxypropyl) methacrylamide] as coating materials for hydroxyapatite nanoparticles in animal solid tumor model. Nanomater. 10(9), 1690 (2020). https://doi.org/10.3390/nano10091690
X. Yang, J. Ruan, C. Ma, B. Hao, X. Huang, G. Lu, C. Feng, Synthesis and self-seeding behavior of oligo (p-phenylene vinylene)-b-poly (N-(2-hydroxypropyl) methacrylamide). Polym. Chem. 10(34), 4718–4731 (2019). https://doi.org/10.1039/C9PY00816K
A. Karatza, P. Klonos, S. Pispas, A. Kyritsis, Glass transition and molecular dynamics in PHPMA-b-POEGMA block copolymers. Polymer (Guildf) 181, 121794 (2019). https://doi.org/10.1016/j.polymer.2019.121794
B.S. Tucker, B.S. Sumerlin, Poly (N-(2-hydroxypropyl) methacrylamide)-based nanotherapeutics. Polym. Chem. 5(5), 1566–1572 (2014). https://doi.org/10.1039/C3PY01279D
L.W. Seymour, R. Duncan, J. Strohalm, J. Kopeček, Effect of molecular weight (M w) of N-(2-hydroxypropyl) methacrylamide copolymers on body distribution and rate of excretion after subcutaneous, intraperitoneal, and intravenous administration to rats. J. Biomed. Mater. Res. 21(11), 1341–1358 (1987). https://doi.org/10.1002/jbm.820211106
G. Li, M. Zhao, J. Zhang, H. Li, W. Xu, L. Pu, X. Shi, Poly (HPMA)–chlorambucil conjugate nanoparticles: facile fabrication and in vitro anti-cancer activity. New. J. Chem. 18544–18551 (2021). https://doi.org/10.1039/D1NJ03134A
K. Luo, J. Yang, P. Kopečková, J. Kopeček, Biodegradable multiblock poly [N-(2-hydroxypropyl) methacrylamide] via reversible addition− fragmentation chain transfer polymerization and click chemistry. Macromolecules 44(8), 2481–2488 (2011). https://doi.org/10.1021/ma102574e
D. Mitra, E.-T. Kang, K.G. Neoh, Polymer-based coatings with integrated antifouling and bactericidal properties for targeted biomedical applications. ACS Appl. Polym. Mater. 3(5), 2233–2263 (2021). https://doi.org/10.1021/acsapm.1c00125
R.M. Al-Nakashli, C. Cao, R. Raveendran, H. Lu, M.H. Stenzel, Increased drug-loading enhances the activity of ellipticine in poly (N-(2-hydroxypropyl) methacrylamide) PHPMA-based polymeric micelles in 2D and 3D cancer cell models. Macromol. Chem. Phys. 224(1), 2200179 (2023). https://doi.org/10.1002/macp.202200179
S. Singh, 2 Polymeric biomaterials in drug-delivery systems. Polym. Biomater. Fabr. Prop. Appl., 2 (2023)
M. Mishra, D.-M. Chun, α-Fe2O3 as a photocatalytic material: a review. Appl. Catal. A Gen. 498, 126–141 (2015). https://doi.org/10.1016/j.apcata.2015.03.023
G. Liu, Q. Deng, H. Wang, D.H. Ng, M. Kong, W. Cai, G. Wang, Micro/nanostructured α-Fe2O3 spheres: synthesis, characterization, and structurally enhanced visible-light photocatalytic activity. J. Mater. Chem. 22(19), 9704–9713 (2012). https://doi.org/10.1039/C2JM31586F
A. Rahdar, H. Arabi, Preparation of super paramagnetic iron oxide nanoparticles and investigation their magnetic properties. Int. J. Sci. Eng. Invest. 1, 10312–10313 (2012)
N. Ajinkya, X. Yu, P. Kaithal, H. Luo, P. Somani, S. Ramakrishna, Magnetic iron oxide nanoparticle (IONP) synthesis to applications: present and future. Materials (Basel). 13(20), 4644 (2020). https://doi.org/10.3390/ma13204644
K.E. Albinali, M.M. Zagho, Y. Deng, A.A. Elzatahry, A perspective on magnetic core–shell carriers for responsive and targeted drug delivery systems. Int. J. Nanomedicine. 1707–1723 (2019)
M.C. Goncalves, Sol-gel silica nanoparticles in medicine: a natural choice. Design, synthesis and products. Mol. 23(8), 2021 (2018). https://www.mdpi.com/1420-3049/23/8/2021#
Z. Plichta, Y. Kozak, R. Panchuk, V. Sovolova, M. Epple, L. Kobilynska, D. Horák, Cytotoxicity of doxorubicin-conjugated poly [N-(2-hydroxypropyl) methacrylamide]-modified γ-Fe2O3 nanoparticles towards human tumor cells. Beilstein J. Nanotechnol. l9(1), 2533–2545 (2018). https://doi.org/10.3762/bjnano.9.236
A.N. Frone, M.S. Popa, C.D. Usurelu, D.M. Panaitescu, A.R. Gabor, C.A. Nicolae, E. Alexandrescu, Bio-based poly (lactic acid)/poly (butylene sebacate) blends with improved toughness. 14(19), 3998 (2022). https://www.mdpi.com/2073-4360/14/19/3998#
M.D. Bartlett, N. Kazem, J.M. Powell-Palm, X. Huang, W. Sun, J.A. Malen, C. Majidi, High thermal conductivity in soft elastomers with elongated liquid metal inclusions. Proc. Natl. Acad. Sci. 114(9), 2143–2148 (2017). https://doi.org/10.1073/pnas.1616377114
Accelrys Inc., Accelrys materials studio (Version 7) [Computer software] (Accelrys Inc., San Diego, California, 2014)
J. Yang, X. Gong, G. Wang, Compatibility and mechanical properties of BAMO–AMMO/DIANP composites: a molecular dynamics simulation. Comput. Mater. Sci. 102, 1–6 (2015). https://doi.org/10.1016/j.commatsci.2015.02.010
K. Golzar, H. Modarress, S. Amjad-Iranagh, Effect of pristine and functionalized single-and multi-walled carbon nanotubes on CO2 separation of mixed matrix membranes based on polymers of intrinsic microporosity (PIM-1): a molecular dynamics simulation study. J. Mol. Model. 23, 1–25 (2017). https://doi.org/10.1007/s00894-017-3436-3
S.L. Mayo, B.D. Olafson, W.A. Goddard, DREIDING: a generic force field for molecular simulations. J. Phys. Chem. 94(26), 8897–8909 (1990). https://doi.org/10.1021/j100389a010
A. Fereidoon, S. Aleaghaee, I. Taraghi, Mechanical properties of hybrid graphene/TiO2 (rutile) nanocomposite: a molecular dynamics simulation. Comput. Mater. Sci. 102, 220–227 (2015). https://doi.org/10.1016/j.commatsci.2015.02.044
A. Benkhelifa, K.E. Boudraa, T. Bouchaour, Enhancement of shape memory properties of thermo-responsive copolymers-based 2-hydroxy propyl methacrylate and n-isobornyl acrylate. J. Therm. Anal. Calorim., 1–16 (2022). https://doi.org/10.1007/s10973-022-11532-z
H.J.C. Berendsen, J.P.M. van Postma, W.F. Van Gunsteren, A. DiNola, J.R. Haak, Molecular dynamics with coupling to an external bath. J. Chem. Phys. 81(8), 3684–3690 (1984). https://doi.org/10.1063/1.448118
E. Yildirim, D. Cimen, A. Zengin, T. Caykara, Synthesis of poly (N-(2-hydroxypropyl) methacrylamide) brushes by interface-mediated RAFT polymerization. RSC Adv. 6(51), 45259–45264 (2016). https://doi.org/10.1039/C6RA04189B
Y. Wang, Q. Wei, S. Wang, W. Chai, Y. Zhang, Structural and water diffusion of poly (acryl amide)/poly (vinyl alcohol) blend films: experiment and molecular dynamics simulations. J. Mol. Graph. Model. 71, 40–49 (2017). https://doi.org/10.1016/j.jmgm.2016.11.001
J.A. Manson, L.H. Sperling, Polymer blends and composites (New York plenum press, New York, 1976)
Y. Fu, L. Liao, L. Yang, Y. Lan, L. Mei, Y. Liu, S. Hu, Molecular dynamics and dissipative particle dynamics simulations for prediction of miscibility in polyethylene terephthalate/polylactide blends. Mol. Simul. 39(5), 415–422 (2013). https://doi.org/10.1080/08927022.2012.738294
I.M. Arenaza, E. Meaurio, B. Coto, J.R. Sarasua, Molecular dynamics modelling for the analysis and prediction of miscibility in polylactide/polyvinilphenol blends. Polymer 51(19), 4431–4438 (2010). https://doi.org/10.1016/j.polymer.2010.07.018
Y. Wang, Q. Wei, F. Pan, M. Yang, S. Wei, Molecular dynamics simulations for the examination of mechanical properties of hydroxyapatite/poly α-n-butyl cyanoacrylate under additive manufacturing. Biomed. Mater. Eng. 24(1), 825–833 (2014). https://doi.org/10.3233/BME-130874
X. Michalet, Mean square displacement analysis of single-particle trajectories with localization error: Brownian motion in an isotropic medium. Phys. Rev. E 82(4), 041914 (2010). https://doi.org/10.1103/PhysRevE.82.041914
C.-C. Huang, M.-X. Du, B.-Q. Zhang, C.-Y. Liu, Glass transition temperatures of copolymers: molecular origins of deviation from the linear relation. Macromolecules 55(8), 3189–3200 (2022). https://doi.org/10.1021/acs.macromol.1c02287
M. Mohammadi, J. Davoodi, The glass transition temperature of PMMA: a molecular dynamics study and comparison of various determination methods. Eur. Polym. J. 91, 121–133 (2017). https://doi.org/10.1016/j.eurpolymj.2017.03.056
K. Fu, F. Lü, Q. Xie, H. Ruan, X. Yang, S. Liang, The effects of shape and mass fraction of nano-SiO2 on thermomechanical properties of nano-SiO2/DGEBA/MTHPA composites: a molecular dynamics simulation study. AIP Adv. 10(1), 015339 (2020). https://doi.org/10.1063/1.5135627
P.W. Tasker, The stability of ionic crystal surfaces. J. Phys. C Solid State Phys. 12(22), 4977 (1979). https://doi.org/10.1088/0022-3719/12/22/036
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Ethical Approval
We wish to confirm that there are no known conflicts of interest related to this publication or substantial financial support that would have impacted the research’s findings. We certify that all named authors have read, reviewed, and approved the paper and that no other individuals who meet the requirements for authorship but are not listed have contributed to the work. We also reaffirm that we all approved of the order in which the authors are listed in the manuscript. We certify that the protection of the intellectual property connected to this work has been given careful consideration and that there are no intellectual property-related obstacles to publishing, including the date of publication. By completing this, we attest to having complied with our institutions’ intellectual property rules. We again reaffirm that all relevant bodies have given their ethical approval for all aspects of the research discussed in this publication. We recognize that the corresponding author including the editorial manager and any direct discussions with the office is the only point of contact for the editorial process. He is in charge of informing the other authors of his progress, their submission of corrections, and his final acceptance of the proofs. We certify that the corresponding author can access the email address we gave as being current and accurate.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zouati, N., Boudraa, K.E. & Lasri, B. Thermal Stability and Mechanical Properties of Poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA) Modified by Fe2O3 Nanoparticles. Braz J Phys 54, 65 (2024). https://doi.org/10.1007/s13538-024-01435-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s13538-024-01435-9