Conformable, Thin, and Dry Electrode for Electrocardiography Using Composite of Silver Nanowires and Polyvinyl Butyral
- 160 Downloads
Development of a thin and dry electrode for electrocardiography (ECG) is essential in order to prevent skin irritation, allergic reactions from electrolytic gel, and motion artifacts caused by relative motion between the electrodes and the skin. In this study, we have developed a composite electrode made from Ag nanowires (AgNWs) and polyvinyl butyral (PVB), prepared by inverted layer processing (ILP). The initial composite electrodes were mechanically stable, flexible, and transparent; however, most of the NWs were located beneath the surface of the PVB such that few conductive pathways were exposed and available to contact the skin. In order to resolve this issue, prior to transferring the AgNWs from the temporary glass substrate to the PVB, we irradiated the NWs with intensive pulsed light. This irradiation induced plasmonic heating of the AgNWs, which caused the NWs to sink towards the glass and form a dense layer on the temporary substrate. Subsequent ILP resulted in the fabrication of an AgNWs/PVB composite electrode that demonstrated significant surface coverage of conductive pathways available for stable electrical contact with skin. The resultant composite electrode is an improved ECG electrode that exhibits fewer motion artifacts compared to conventional Ag/AgCl-based wet electrodes since it is both dry and conformable.
KeywordsAg nanowires Conformal electrode Electrocardiography Intense pulsed light Composite
This work was supported by a National Research Foundation of Korea (NRF) Grant (Numbers 2015R1A4A1042417, 2018R1D1A1B07047386 and 2016M3A7B4910) funded by the Korean government (MSIP).
- 22.Kim, Y., Ryu, T.I., Ok, K.-H., Kwak, M.-G., Park, S., Park, N.-G., Han, C.J., Kim, B.S., Ko, M.J., Son, H.J., Kim, J.-W.: Inverted layer-by-layer fabrication of an ultraflexible and transparent Ag nanowire/conductive polymer composite electrode for use in high-performance organic solar cells. Adv. Funct. Mater. 25, 4580–4589 (2015)CrossRefGoogle Scholar
- 28.Kim, R.H., Kim, H.J., Bae, I., Hwang, S.K., Velusamy, D.B., Cho, S.M., Takaishi, K., Muto, T., Hashizume, D., Uchiyama, M., André, P., Mathevet, F., Heinrich, B., Aoyama, T., Kim, D.E., Lee, H., Ribierre, J.C., Park, C.: Non-volatile organic memory with sub-millimetre bending radius. Nat. Commun. 5, 3583 (2014)CrossRefGoogle Scholar
- 31.Kim, K.S., Kim, S.O., Han, C.J., Kim, D.U., Kim, J.S., Yu, Y.T., Lee, C.R., Kim, J.W.: Revisiting the thickness reduction approach for near-foldable capacitive touch sensors based on a single layer of Ag nanowire-polymer composite structure. Compos. Sci. Technol. 165, 58–65 (2018)CrossRefGoogle Scholar