Skip to main content
SpringerLink
Log in

Alkali-Activation Potential of Sandstone Wastes with Electric Arc Furnace Slag as Co-additive

  • Research Article-Civil Engineering
  • Published:
Arabian Journal for Science and Engineering Aims and scope Submit manuscript

Abstract

Electric arc furnace slag (EAF) and sandstone waste (SW) are two of the most abundantly generated industrial wastes whose utilization as precursors and supplementary cementitious materials has not been exhaustively studied. The current research study comprehensively investigates the effects of incorporating varying proportions (0–90%) of re-melted EAF as a co-additive on the engineering properties of elevated (80 °C) and ambient (30 °C) cured alkali-activated SW-based binders. Extensive laboratory tests were conducted to assess the physio-mechanical and durability performance of the resulting alkali-activated materials (AAM). Detailed mineralogical and microstructural characterization of SW, EAF, and alkali-activated samples was carried out using sophisticated analytical techniques. Results advocated that irrespective of the curing temperatures, SW-based AAM showed improved setting behavior, compressive strength, water absorption, and porosity characteristics with the increment of EAF at all substitution levels due to the concomitant development of CASH-CSH-NASH gel phases. Overall, it can be inferred that EAFs as a pozzolanic material successfully augmented the properties of SW-based alkali-activated binders, providing an efficient solution for disposal and negative environmental impacts associated with industrial wastes.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Worldwide Cement Production from 1995 to 2022, (accessed 12.04.2023). https://www.statista.com/statistics/1087115/global-cement-production-volume/.

  2. Balestra, C.E.T.; Garcez, L.R.; da Silva, L.C.; Veit, M.T.; Jubanski, E.; Nakano, A.Y.; Gil, M.A.R.: Contribution to low-carbon cement studies: Effects of silica fume, fly ash, sugarcane bagasse ash and acai stone ash incorporation in quaternary blended limestone-calcined clay cement concretes. Environ. Dev. 45, 100792 (2023). https://doi.org/10.1016/j.envdev.2022.100792

    Article  Google Scholar 

  3. Scrivener, K.L.; Kirkpatrick, R.J.: Innovation in use and research on cementitious material. Cem. Concr. Res. 38, 128–136 (2008). https://doi.org/10.1016/j.cemconres.2007.09.025

    Article  Google Scholar 

  4. Van Deventer, J.S.J.; Provis, J.L.; Duxson, P.; Brice, D.G.: Chemical research and climate change as drivers in the commercial adoption of alkali activated materials. Waste Biomass Valoriz. 1, 145–155 (2010). https://doi.org/10.1007/s12649-010-9015-

    Article  Google Scholar 

  5. He, J.; Zhang, J.; Yu, Y.; Zhang, G.: The strength and microstructure of two geopolymers derived from metakaolin and red mud-fly ash admixture: A comparative study. Constr. Build. Mater. 30, 80–91 (2012). https://doi.org/10.1016/j.conbuildmat.2011.12.011

    Article  Google Scholar 

  6. Bernal, S.A.; Mejía De Gutiérrez, R.; Provis, J.L.: Engineering and durability properties of concretes based on alkali-activated granulated blast furnace slag/metakaolin blends. Constr. Build. Mater. 33, 99–108 (2012). https://doi.org/10.1016/j.conbuildmat.2012.01.017

    Article  Google Scholar 

  7. Alonso, S.; Palomo, A.: Calorimetric study of alkaline activation of calcium hydroxide-metakaolin solid mixtures. Cem. Concr. Res. 31, 25–30 (2001). https://doi.org/10.1016/S0008-8846(00)00435-X

    Article  Google Scholar 

  8. Wang, S.D.; Scrivener, K.L.: Hydration products of alkali activated slag cement. Cem. Concr. Res. 25, 561–571 (1995). https://doi.org/10.1016/0008-8846(95)00045-E

    Article  Google Scholar 

  9. Verma, M.; Dev, N.: Sodium hydroxide effect on the mechanical properties of flyash-slag based geopolymer concrete. Struct. Concr. 22, E368–E379 (2021). https://doi.org/10.1002/suco.202000068

    Article  Google Scholar 

  10. JSJ Provis JL.; Van Deventer, (2009) Geopolymers Structure, processing, properties and industrial applications, Wood Head Publications In Materials, .https://www.academia.edu/34232666/Geopolymers_Structures_Processing_Properties_and_Industrial_Applications.

  11. Kumar, S.; Gupta, R.C.; Shrivastava, S.: Effective utilisation of quartz sandstone mining wastes: A technical note on its thermal resistance. J. Clean. Prod. 140, 1129–1135 (2017). https://doi.org/10.1016/j.jclepro.2016.10.053

    Article  Google Scholar 

  12. Mabroum, S.; Moukannaa, S.; El Machi, A.; Taha, Y.; Benzaazoua, M.; Hakkou, R.: Mine wastes based geopolymers: A critical review. Clean. Eng. Technol. 1, 100014 (2020). https://doi.org/10.1016/j.clet.2020.100014

    Article  Google Scholar 

  13. Production of Natural Stones in the World in 2019-Estimates, 2019 (accessed 25.03.2023), https://www.globaltrademag.com.

  14. Al-Joulani, N.: Soil contamination in Hebron district due to stone cutting industry, Jordan. J. Appl. Sci. Nat. Sci. 10, 37–50 (2008). https://doi.org/10.5276/jswtm.2009.247

    Article  Google Scholar 

  15. A. Singhal, Environmental Impacts of Sandstone Quarrying at Keru, Jodhpur , Rajasthan Environmental Impacts of Sandstone Quarrying at Keru , Jodhpur , Rajasthan A dissertation submitted to Indian Institute of Technology Kharagpur In partial fulfilment for the requir, (2020). https://doi.org/10.13140/RG.2.2.32563.25127.

  16. Mundra, S.; Agrawal, V.; Nagar, R.: Sandstone cutting waste as partial replacement of fine aggregates in concrete: A mechanical strength perspective. J. Build. Eng. 32, 101534 (2020). https://doi.org/10.1016/j.jobe.2020.101534

    Article  Google Scholar 

  17. Arif, M.; Gupta, V.; Choudhary, H.; Kumar, S.; Basu, P.: Performance evaluation of cement concrete containing sandstone slurry. Constr. Build. Mater. 184, 432–439 (2018). https://doi.org/10.1016/j.conbuildmat.2018.07.007

    Article  Google Scholar 

  18. Basu, P.; Thomas, B.S.; Gupta, R.C.; Agrawal, V.: Properties of sustainable self-compacting concrete incorporating discarded sandstone slurry. J. Clean. Prod. 281, 125313 (2021). https://doi.org/10.1016/j.jclepro.2020.125313

    Article  Google Scholar 

  19. Kumar, S.; Gupta, R.C.; Shrivastava, S.: Long term studies on the utilisation of quartz sandstone wastes in cement concrete. J. Clean. Prod. 143, 634–642 (2017). https://doi.org/10.1016/j.jclepro.2016.12.062

    Article  Google Scholar 

  20. Lahoti, M.; Wong, K.K.; Tan, K.H.; Yang, E.H.: Use of alkali-silica reactive sedimentary rock powder as a resource to produce high strength geopolymer binder. Constr. Build. Mater. 155, 381–388 (2017). https://doi.org/10.1016/j.conbuildmat.2017.08.109

    Article  Google Scholar 

  21. Clausi, M.; Fernández-Jiménez, A.M.; Palomo, A.; Tarantino, S.C.; Zema, M.: Reuse of waste sandstone sludge via alkali activation in matrices of fly ash and metakaolin. Constr. Build. Mater. 172, 212–223 (2018). https://doi.org/10.1016/j.conbuildmat.2018.03.221

    Article  Google Scholar 

  22. R. Occhipinti, A.M. Fern, A. Palomo, S.C. Tarantino, M. Zema, Sulfate-bearing clay and Pietra Serena sludge : Raw materials for the development of alkali activated binders, 301 (2021). https://doi.org/10.1016/j.conbuildmat.2021.124030.

  23. Choi, S.J.; Jun, S.S.; Oh, J.E.; Monteiro, P.J.M.: Properties of alkali-activated systems with stone powder sludge. J. Mater. Cycles Waste Manag. 12, 275–282 (2010). https://doi.org/10.1007/s10163-010-0297-6

    Article  Google Scholar 

  24. Y. Zhao, J. Qiu, J. Xing, X. Sun, Recycling of quarry dust for supplementary cementitious materials in low carbon cement, Constr. Build. Mater. 237 (2020). https://doi.org/10.1016/j.conbuildmat.2019.117608.

  25. Sun, X.; Liu, J.; Qiu, J.; Wu, P.; Zhao, Y.: Alkali activation of blast furnace slag using a carbonate-calcium carbide residue alkaline mixture to prepare cemented paste backfill. Constr. Build. Mater. 320, 126234 (2022). https://doi.org/10.1016/j.conbuildmat.2021.126234

    Article  Google Scholar 

  26. Ministry of Steel - Government of India, Annu. Rep. 2020–21. (2020).

  27. Muhmood, L.; Vitta, S.; Venkateswaran, D.: Cementitious and pozzolanic behavior of electric arc furnace steel slags. Cem. Concr. Res. 39, 102–109 (2009). https://doi.org/10.1016/j.cemconres.2008.11.002

    Article  Google Scholar 

  28. Li, Y.; Lv, M.; Li, R.; Liu, Z.: Life cycle assessment of melting reduction treatment for iron and steel waste slag: A case study in Tangshan, China. Resour. Conserv. Recycl. Adv. 15, 200108 (2022). https://doi.org/10.1016/j.rcradv.2022.200108

    Article  Google Scholar 

  29. IEA (2022), Cement, IEA, Paris. https://www.iea.org/reports/cement.

  30. IS-16714, Ground Granulated Blast Furnace Slag for Use in Cement, Mortar and Concrete - Specification. (2018).

  31. IS: 2720 (Part 2)-1973. (1973). “Determination of water content of soil.” Bur. Indian Stand. New Delhi, India., Reaffirmed (2010): 1–17

  32. IS-1760–1. 1991. “Chemical analysis of limestone, dolomite and allied materials.” Indian Stand., 1–7.

  33. BS-EN, 15167–1: Ground granulated blast furnace slag for use in cement, mortar & concrete- specification, 3 (2013).

  34. Haldar, S.K.; Tišljar, J.: Introduction to Mineralogy and Petrology (2013). https://doi.org/10.1016/C2012-0-03337-6

    Article  Google Scholar 

  35. IS 4031–5, Methods of physical tests for hydraulic cement. Part V- Determination of initial and final setting times, Bur. Indian Stand. New Delhi. (1988) Reaffirmed in 2005.

  36. ASTM C642, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM International, United States, Annual Book of ASTM Standards. (2013) 1–3.

  37. ASTM C109/C109M-99, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars, ASTM International, United States, Annual Book of ASTM Standards. (1999) 1–6.

  38. Saha, S.; Rajasekaran, C.: Enhancement of the properties of fly ash based geopolymer paste by incorporating ground granulated blast furnace slag. Constr. Build. Mater. 146, 615–620 (2017). https://doi.org/10.1016/j.conbuildmat.2017.04.139

    Article  Google Scholar 

  39. Peng, H.; Cui, C.; Liu, Z.; Cai, C.S.; Liu, Y.: Synthesis and reaction mechanism of an alkali-activated metakaolin-slag composite system at room temperature. J. Mater. Civ. Eng. 31, 1–8 (2019). https://doi.org/10.1061/(asce)mt.1943-5533.0002558

    Article  Google Scholar 

  40. Elyamany, H.E.; Abd Elmoaty, M.; Elshaboury, A.M.: Setting time and 7-day strength of geopolymer mortar with various binders. Construct. Build. Mater. 187, 974–983 (2018). https://doi.org/10.1016/j.conbuildmat.2018.08.025

    Article  Google Scholar 

  41. IS 269, Ordinary Portland Cement-Specification, Bur. Indian Stand. New Delhi. (2015).

  42. ASTM C150, Standard specification for Portland cement, ASTM International, United States, Annual book of ASTM standard. (2009) 152–157.

  43. AASHTO M85, Standard specification for Portland cement, American Association of State Highway and Transportation Ofiicials, Washington, D.C. (2020).

  44. E. 197–1 June, Cement - Part 1: Composition, specifications and conformity criteria for common cements Ciment, Eur. Stand. (2000) 1–28.

  45. Phavongkham, V.; Wattanasiriwech, S.; Wattanasiriwech, D.: Tailored design of properties of Hongsa fly ash-based geopolymer paste via an adjustment of the alkali activator composition. Ceram. Int. 47, 13374–13380 (2021). https://doi.org/10.1016/j.ceramint.2021.01.194

    Article  Google Scholar 

  46. Darange, R.; Adesina, A.; Das, S.: Feasibility study on the sustainable utilization of uncalcined clay soils as low-cost binders. Construct. Build. Mater. 340, 127724 (2022). https://doi.org/10.1016/j.conbuildmat.2022.127724

    Article  Google Scholar 

  47. Izquierdo, M.; Querol, X.; Phillipart, C.; Antenucci, D.; Towler, M.: The role of open and closed curing conditions on the leaching properties of fly ash-slag-based geopolymers. J. Hazard. Mater. 176, 623–628 (2010). https://doi.org/10.1016/j.jhazmat.2009.11.075

    Article  Google Scholar 

  48. Salih, M.A.; Abang Ali, A.A.; Farzadnia, N.: Characterization of mechanical and microstructural properties of palm oil fuel ash geopolymer cement paste. Constr. Build. Mater. 65, 592–603 (2014). https://doi.org/10.1016/j.conbuildmat.2014.05.031

    Article  Google Scholar 

  49. Ozturk, M.; Bankir, M.B.; Bolukbasi, O.S.; Sevim, U.K.: Alkali activation of electric arc furnace slag: mechanical properties and micro analyzes. J. Build. Eng. 21, 97–105 (2019). https://doi.org/10.1016/j.jobe.2018.10.005

    Article  Google Scholar 

  50. Huseien, G.F.; Sam, A.R.M.; Shah, K.W.; Asaad, M.A.; Tahir, M.M.; Mirza, J.: Properties of ceramic tile waste based alkali-activated mortars incorporating GBFS and fly ash. Constr. Build. Mater. 214, 355–368 (2019). https://doi.org/10.1016/j.conbuildmat.2019.04.154

    Article  Google Scholar 

  51. Sharmin, A.; Alengaram, U.J.; Jumaat, M.Z.; Yusuf, M.O.; Kabir, S.M.A.; Bashar, I.I.: Influence of source materials and the role of oxide composition on the performance of ternary blended sustainable geopolymer mortar. Constr. Build. Mater. 144, 608–623 (2017). https://doi.org/10.1016/j.conbuildmat.2017.03.178

    Article  Google Scholar 

  52. Gong, Q.; Deng, J.; Han, M.; Yang, L.; Wang, W.: Dissolution of sandstone powders in deionised water over the range 50–350 °C. Appl. Geochemistry. 27, 2463–2475 (2012). https://doi.org/10.1016/j.apgeochem.2012.08.011

    Article  Google Scholar 

  53. Bate, S.C.C.: Guide for structural lightweight aggregate concrete: report of ACI committee 213. Int. J. Cem. Compos. Light. Concr. 1, 5–6 (1979). https://doi.org/10.1016/0262-5075(79)90004-6

    Article  Google Scholar 

  54. Hwang, C.L.; Yehualaw, M.D.; Vo, D.H.; Huynh, T.P.; Largo, A.: Performance evaluation of alkali activated mortar containing high volume of waste brick powder blended with ground granulated blast furnace slag cured at ambient temperature. Constr. Build. Mater. 223, 657–667 (2019). https://doi.org/10.1016/j.conbuildmat.2019.07.062

    Article  Google Scholar 

  55. Hamzah, H.K.; Huseien, G.F.; Asaad, M.A.; Georgescu, D.P.; Ghoshal, S.K.; Alrshoudi, F.: Effect of waste glass bottles-derived nanopowder as slag replacement on mortars with alkali activation: Durability characteristics. Case Stud. Constr. Mater. 15, e00775 (2021). https://doi.org/10.1016/j.cscm.2021.e00775

    Article  Google Scholar 

  56. Open database of minerals, rocks, meteorites and the localities they come from, (accessed 15.02.2023). www.mindat.org.

  57. Riello, P. (2004). Quantitative analysis of amorphous fraction in the study of the microstructure of semi-crystalline materials. In: Diffraction analysis of the microstructure of materials. Berlin, Heidelberg: Springer, Berlin, Heidelberg.

  58. Lavagna, L.; Nisticò, R.: An insight into the chemistry of cement—A review. Appl. Sci. 13(1), 203 (2022). https://doi.org/10.3390/app13010203

    Article  Google Scholar 

  59. Juilland, P.; Nicoleau, L.; Arvidson, R.S.; Gallucci, E.: Advances in dissolution understanding and their implications for cement hydration. RILEM Tech Lett 2, 90–98 (2017)

    Article  Google Scholar 

  60. A.R.C.W.C. Ouzia, (2019) Modeling the kinetics of the main peak and later age of alite hydration, 263. https://infoscience.epfl.ch/record/265591.

  61. Phair, J.W.; Van Deventer, J.S.J.; Smith, J.D.: Mechanism of polysialation in the incorporation of zirconia into fly ash-based geopolymers. Ind. Eng. Chem. Res. 39, 2925–2934 (2000). https://doi.org/10.1021/ie990929w

    Article  Google Scholar 

  62. Chen, K.; Lin, W.T.; Liu, Q.; Chen, B.; Tam, V.W.Y.: Micro-characterizations and geopolymerization mechanism of ternary cementless composite with reactive ultra-fine fly ash, red mud and recycled powder. Constr. Build. Mater. 343, 128091 (2022). https://doi.org/10.1016/j.conbuildmat.2022.128091

    Article  Google Scholar 

  63. Rees, C.A.; Provis, J.L.; Lukey, G.C.; Van Deventer, J.S.J.: In situ ATR-FTIR study of the early stages of fly ash geopolymer gel formation. Langmuir 23, 9076–9082 (2007). https://doi.org/10.1021/la701185g

    Article  Google Scholar 

  64. Mahmoodi, O.; Siad, H.; Lachemi, M.; Dadsetan, S.; Şahmaran, M.: Optimized application of ternary brick, ceramic and concrete wastes in sustainable high strength geopolymers. J Clean. Product. 33(8), 130650 (2022). https://doi.org/10.1016/j.jclepro.2022.130650

    Article  Google Scholar 

  65. Li, Z.; Gao, Y.; Zhang, J.; Zhang, C.; Chen, J.; Liu, C.: Effect of particle size and thermal activation on the coal gangue based geopolymer. Mater. Chem. Phys. 267, 124657 (2021). https://doi.org/10.1016/j.matchemphys.2021.124657

    Article  Google Scholar 

Download references

Funding

No funds, grants, or other support were received.

Author information

Authors and Affiliations

  1. Birla Institute of Technology and Science-Pilani Campus, Birla Institute of Technology and Science Pilani, Pilani, 333031, Rajasthan, India

    Akash Samadhiya, Dipendu Bhunia & Sayantan Chakraborty

Authors
  1. Akash Samadhiya
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Dipendu Bhunia
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Sayantan Chakraborty
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

AS is involved in conceptualization, methodology, formal analysis and investigation, data curation, validation, visualization, writing—original draft preparation. DB is involved in project administration, supervision, resources, writing, review, and editing. SC is involved in conceptualization, supervision, writing, review, and editing.

Corresponding author

Correspondence to Dipendu Bhunia.

Ethics declarations

Conflict of interest

The authors have no competing interests to declare relevant to this article’s content.

Consent for publication

The manuscript included all the datasets generated or analyzed during the current study.

Ethical approval

This article does not contain any studies with human participants or animals performed by any authors.

Supplementary Information

Below is the link to the electronic supplementary material.

Supplementary file1 (DOCX 43 KB)

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Samadhiya, A., Bhunia, D. & Chakraborty, S. Alkali-Activation Potential of Sandstone Wastes with Electric Arc Furnace Slag as Co-additive. Arab J Sci Eng 49, 5817–5833 (2024). https://doi.org/10.1007/s13369-023-08514-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13369-023-08514-0

Keywords

Search

Navigation