Abstract
This study proposes a two-phase switched-inductor DC–DC converter with a voltage multiplication stage to attain high-voltage gain. The converter is an ideal solution for applications requiring significant voltage gains, such as integrating photovoltaic energy sources to a direct current distribution bus or a microgrid. The structure of the introduced converter is comprised of an interleaved switched-inductor boost stage attached to the voltage multiplier cells stage. The interleaved switched-inductor consists of two switched-inductor phases controlled by two out-of-phase controllable switches. The switched-inductor stage can be fed by single or multiple self-controlled input power sources. The voltage multiplier networks are comprised of diodes and capacitors to raise the converter’s voltage gain. Several advantages are gained using the proposed converter such as, reduced potential stress on switching elements, the continuity of the source current, and the modularity of both the switched-inductor and the voltage multiplier stages. In addition, the modularity of the proposed converter improves the scalability, in which the voltage gain can be increased by connecting additional voltage multipliers or switched-inductor cells. The theory of operations of the presented converter, component selection, and steady-state calculations are explained in detail. The simulation results support the theoretical investigation and verify the hardware implementation of a 400 W experimental prototype to convert 20.0 V from an input voltage source to a 400.0 V output load.
Similar content being viewed by others
References
Blaabjerg, F.; Ma, K.; Yang, Y.: Power electronics for renewable energy systems-status and trends. In: 2014 8th International Conference on Integrated Power Systems (CIPS), pp. 1–11, VDE (2014)
Harb, S.; Kedia, M.; Zhang, H.; Balog, R.S.: Microinverter and string inverter grid-connected photovoltaic system: a comprehensive study. In: Photovoltaic Specialists Conference (PVSC), 2013 IEEE 39th, pp. 2885–2890, IEEE (2013)
Sher, H.A.; Addoweesh, K.E.: Micro-inverters-promising solutions in solar photovoltaics. Energy Sustain. Dev. 16(4), 389–400 (2012)
Zheng, H.; Li, S.; Challoo, R.; Proano, J.: Shading and bypass diode impacts to energy extraction of pv arrays under different converter configurations. Renew. Energy 68, 58–66 (2014)
Dhople, S.V.; Ehlmann, J.L.; Davoudi, A.; Chapman, P.L.: Multiple-input boost converter to minimize power losses due to partial shading in photovoltaic modules. In: Energy Conversion Congress and Exposition (ECCE), 2010 IEEE, pp. 2633–2636, IEEE (2010)
Reinoso, C.R.S.; Milone, D.H.; Buitrago, R.H.: Simulation of photovoltaic centrals with dynamic shading. Appl. Energy 103, 278–289 (2013)
Kouro, S.; Leon, J.I.; Vinnikov, D.; Franquelo, L.G.: Grid-connected photovoltaic systems: an overview of recent research and emerging pv converter technology. IEEE Ind. Electron. Mag. 9(1), 47–61 (2015)
Kasper, M.; Ritz, M.; Bortis, D.; Kolar, J.W.: Pv panel-integrated high step-up high efficiency isolated gan dc–dc boost converter. In: Telecommunications Energy Conference ‘Smart Power and Efficiency’ (INTELEC), Proceedings of 2013 35th International, pp. 1–7, VDE (2013)
Bhaskar, M.S.; Ramachandaramurthy, V.K.; Padmanaban, S.; Blaabjerg, F.; Ionel, D.M.; Mitolo, M.; Almakhles, D.: Survey of dc–dc non-isolated topologies for unidirectional power flow in fuel cell vehicles. IEEE Access 8, 178130–178166 (2020)
Alzahrani, A.; Ferdowsi, M.; Shamsi, P.: A family of scalable non-isolated interleaved dc–dc boost converters with voltage multiplier cells. IEEE Access 7, 11707–11721 (2019)
Zhu, L.: A novel soft-commutating isolated boost full-bridge zvs-pwm dc–dc converter for bidirectional high power applications. IEEE Trans. Power Electron. 21(2), 422–429 (2006)
Hong, F.; Li, L.; Wu, Y.; Ji, B.; Zhou, Y.: 1500 v three-level forward converter with phase-shifted control. IET Power Electron. 11(9), 1547–1555 (2018)
Waltrich, G.; Barbi, I.: Modelling, control and realisation of the single-ended forward converter with resonant reset at the secondary side. IET Power Electron. 8(11), 2097–2106 (2015)
Bilsalam, A.; Boonyaroonate, I.; Chunkag, V.: High-voltage gain zero-current switching push-pull resonant converter for small energy sources. IET Power Electron. 9(4), 835–845 (2016)
Andreta, A.G.; Lamorelle, T.; Lembeye, Y.; Kerachev, L.; Sarrafin, F.; Fernando, L.; Villa, L.; Crebier, J.C.: A high efficiency and power density, high step-up, non-isolated dc–dc converter based on multicell approach. In: CIPS 2018; 10th International Conference on Integrated Power Electronics Systems, pp. 1–5, VDE (2018)
Reusch, D.; Biswas, S.; Zhang, Y.: System optimization of a high power density non-isolated intermediate bus converter for 48 v server applications. In: 2018 IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 2191–2197 (2018)
Martinez, W.; Cortes, C.; Yamamoto, M.; Imaoka, J.; Umetani, K.: Total volume evaluation of high-power density non-isolated dc–dc converters with integrated magnetics for electric vehicles. IET Power Electron. 10(14), 2010–2020 (2017)
Bhaskar, M.S.; Meraj, M.; Iqbal, A.; Padmanaban, S.; Maroti, P.K.; Alammari, R.: High gain transformer-less double-duty-triple-mode dc/dc converter for dc microgrid. Ieee Access 7, 36353–36370 (2019)
Li, F.; Liu, H.; Zhang, C.; Wheeler, P.: Novel high step-up dual switches converter with reduced power device voltage stress for distributed generation system. IET Power Electron. 10(14), 1800–1809 (2017)
Molavi, N.; Adib, E.; Farzanehfard, H.: Soft-switched non-isolated high step-up dc–dc converter with reduced voltage stress. IET Power Electron. 9(8), 1711–1718 (2016)
Khalilzadeh, M.; Abbaszadeh, K.: Non-isolated high step-up dc–dc converter based on coupled inductor with reduced voltage stress. IET Power Electron. 8(11), 2184–2194 (2015)
Nejad, M.L.; Poorali, B.; Adib, E.; Birjandi, A.A.M.: New cascade boost converter with reduced losses. IET Power Electron. 9(6), 1213–1219 (2016)
Cao, Y.; Samavatian, V.; Kaskani, K.; Eshraghi, H.: A novel nonisolated ultra-high-voltage-gain dc–dc converter with low voltage stress. IEEE Trans. Ind. Electron. 64, 2809–2819 (2017)
Lakshmi, M.; Hemamalini, S.: Nonisolated high gain dc–dc converter for dc microgrids. IEEE Trans. Ind. Electron. 65(2), 1205–1212 (2017)
Tang, Y.; Fu, D.; Wang, T.; Xu, Z.: Hybrid switched-inductor converters for high step-up conversion. IEEE Trans. Ind. Electron. 62, 1480–1490 (2015)
Wang, Y.; Jing, W.; Qiu, Y.; Wang, Y.; Deng, X.; Hua, K.; Hu, B.; Xu, D.: Y-source boost a family of y-source dc/dc converter based on switched inductor. IEEE Trans. Ind. Appl. (2018)
Bhaskar, M.S.; Padmanaban, S.; Blaabjerg, F.; Wheeler, P.W.: An improved multistage switched inductor boost converter (improved m-sibc) for renewable energy applications: a key to enhance conversion ratio. In: 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics (COMPEL), pp. 1–6, IEEE (2018)
Maroti, P.K.; Padmanaban, S.; Wheeler, P.; Blaabjerg, F.; Rivera, M.: Modified boost with switched inductor different configurational structures for dc–dc converter for renewable application. In: Power Electronics Conference (SPEC), 2017 IEEE Southern, pp. 1–6, IEEE (2017)
de Morais, J.C.S.; Gules, R.; de Morais, J.L.S.; Fernandes, L.G.: Transformerless dc–dc converter with high voltage gain based on a switched-inductor structure applied to photovoltaic systems. In: 2017 Brazilian Power Electronics Conference (COBEP), pp. 1–6 (2017)
Raghavendra, K.V.G.; Zeb, K.; Muthusamy, A.; Krishna, T.; Kumar, S.; Kim, D.-H.; Kim, M.-S.; Cho, H.-G.; Kim, H.-J.: A comprehensive review of dc–dc converter topologies and modulation strategies with recent advances in solar photovoltaic systems. Electronics 9(1), 31 (2020)
Jiang, W.; Chincholkar, S.H.; Chan, C.-Y.: Improved output feedback controller design for the super-lift re-lift luo converter. IET Power Electron. 10(10), 1147–1155 (2017)
Alzahrani, A.; Shamsi, P.; Ferdowsi, M.: A novel non-isolated high-gain dc–dc boost converter. In: Power Symposium (NAPS), 2017 North American, pp. 1–6, IEEE (2017)
Müller, L.; Kimball, J.W.: High gain dc–dc converter based on the Cockcroft–Walton multiplier. IEEE Trans. Power Electron. 31(9), 6405–6415 (2016)
Alzahrani, A.; Ferdowsi, M.; Shamsi, P.: High-voltage-gain dc–dc step-up converter with bifold Dickson voltage multiplier cells. IEEE Trans. Power Electron. 34(10), 9732–9742 (2019)
Varesi, K.; Hassanpour, N.; Saeidabadi, S.: Novel high step-up dc-dc converter with increased voltage gain per devices and continuous input current suitable for dc microgrid applications. Int. J. Circuit Theory Appl. 48(10), 1820–1837 (2020)
Li, W.; Xiang, X.; Li, C.; Li, W.; He, X.: Interleaved high step-up zvt converter with built-in transformer voltage Doubler cell for distributed pv generation system. IEEE Trans. Power Electron. 28(1), 300–313 (2013)
He, L.; Liao, Y.: An advanced current-autobalance high step-up converter with a multicoupled inductor and voltage multiplier for a renewable power generation system. IEEE Trans. Power Electron. 31(10), 6992–7005 (2016)
Zafrany, I.; Ben-Yaakov, S.: Generalized switched inductor model (gsim): accounting for conduction losses. IEEE Trans. Aerosp. Electron. Syst. 38(2), 681–687 (2002)
Venkatachalam, K.; Sullivan, C.; Abdallah, T.; Tacca, H.: Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters. In: 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings., pp. 36–41 (2002)
Wang, R.; Wang, F.; Boroyevich, D.; Burgos, R.; Lai, R.; Ning, P.; Rajashekara, K.: A high power density single-phase pwm rectifier with active ripple energy storage. IEEE Trans. Power Electron. 26(5), 1430–1443 (2010)
Kazimierczuk, M.K.: High-Frequency Magnetic Components. Wiley, Hoboken (2009)
Shen, Z.J.; Xiong, Y.; Cheng, X.; Fu, Y.; Kumar, P.: Power mosfet switching loss analysis: a new insight. In: Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, vol. 3, pp. 1438–1442, IEEE (2006)
Xiong, Y.; Sun, S.; Jia, H.; Shea, P.; Shen, Z.J.: New physical insights on power mosfet switching losses. IEEE Trans. Power Electron. 24(2), 525–531 (2009)
Li, X.; Zhang, L.; Guo, S.; Lei, Y.; Huang, A.Q.; Zhang, B.: Understanding switching losses in sic mosfet: toward lossless switching. In: 2015 IEEE 3rd Workshop on Wide Bandgap Power Devices and Applications (WiPDA), pp. 257–262, IEEE (2015)
Yamashita, N.; Murakami, N.; Yachi, T.: Conduction power loss in mosfet synchronous rectifier with parallel-connected Schottky barrier diode. IEEE Trans. Power Electron. 13(4), 667–673 (1998)
Evzelman, M.; Ben-Yaakov, S.: Average-current-based conduction losses model of switched capacitor converters. IEEE Trans. Power Electron. 28(7), 3341–3352 (2012)
Seeman, M.D.; Sanders, S.R.: Analysis and optimization of switched-capacitor dc–dc converters. IEEE Trans. Power Electron. 23(2), 841–851 (2008)
Acknowledgements
The author is thankful to the Deanship of Scientific Research at Najran University for funding this work under the General Research Funding program Grant Code (NU/-/SERC/10/530).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The author declares that he has no conflict of interest.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Alzahrani, A. Interleaved Switched-Inductor Boost Converter for Photovoltaic Energy Application. Arab J Sci Eng 48, 6419–6430 (2023). https://doi.org/10.1007/s13369-022-07392-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-022-07392-2