Abstract
The continuous increase in power requirement has created new challenges for insulating materials. In a construction of a power transformer, the paper insulation is most vulnerable to power leakage. The condition of the insulation system in a power transformer directly affects its stability and reliability. The emergence of nanodielectrics for specialized high-voltage applications sparked off a variety of research activities, which proved that nanocomposites are capable of improving the electrical, thermal and mechanical properties of polymers. This paper primarily investigates the effect of layering of alkyl phenolic resin nanocomposite onto a basic cellulose paper by increasing resin’s content from 3.0–7.0%. Assessment is done to examine various physical, mechanical and dielectric properties. Analysis of the results indicates that alkyl phenolic resin-modified paper has uncommon properties that can become a promising replacement against basic cellulose paper. Also, the modification of the phenolic resin with the addition of silicon carbide (nSiC) nanoparticles (nanofillers) can greatly enhance the mechanical flexural strength, visco-elastic and thermal stability of the composite. The paper outlines the characteristics and properties of modified insulating paper in comparison with other existing unmodified insulating papers such as basic kraft paper, electra paper, nomex paper.
Similar content being viewed by others
References
Kanakambaran, S.; Sarathi, R.; Srinivasan, B.: Identification and localization of partial discharge in transformer insulation adopting cross recurrence pot analysis of acoustic signals detected using fiber bragg gratings. IEEE Trans. Dielectr. Electr. Insul. 24(3), 1773–1780 (2017)
Tuncer, E.; Polizos, G.; Sauers, I.; James, D.R.: Electrical insulation paper and its physical properties at cryogenic temperatures. IEEE Trans. Appl. Supercond. 21(3), 1438–1440 (2006)
Jindal, V.; Singh, J.: Looking at the transformer kraft paper. Electr. India Mag. 56(6), 64–68 (2016)
Morgan, V.T.: Effects of frequency, temperature, compression, and air pressure on the dielectric properties of a multilayer stack of dry kraft paper. IEEE Trans. Dielectr. Electr. Insul. 5(1), 125–131 (1998)
Madavan, R.; Balaraman, S.: Failure analysis of transformer liquid–solid insulation system under selective environmental conditions using Weibull statistics method. Eng. Fail. Anal. 65, 26–38 (2016)
Chakravorti, S.; Dey, D.; Chatterjee, B.: Recent Trends in the Condition Monitoring of Transformers. Springer, London (2013)
Grabowski, C.A.; Fillery, S.P.; Westing, N.M.; Chi, C.; Meth, J.S.; Durstock, M.F.; Vaia, R.A.: Dielectric breakdown in silica-amorphous polymer nano-composite films: the role of the polymer matrix. ACS Appl. Mater. Interfaces. 5(12), 5486–5492 (2013)
Mutiso, M.; Winey, K.I.: Electrical properties of polymer nano-composites containing rod-like nano-fillers. Prog. Polym. Sci. 40, 63–84 (2015)
Contreras, J.E.; Rodriguez, E.A.; Taha-Tijerina, J.: Nanotechnology applications for electrical transformers—a review. Electr. Power Syst. Res. 143, 573–584 (2017)
Fothergill, J.; Nelson, J.K.; Fu, M.: “Dielectric properties of epoxy nano-composites containing TiO2, Al2O3 and ZnO fillers, pp. 406–409. IEEE Conf. Electr. Insul. Dielectr. Phenom., CEIDP (2004)
Hunag, X.; Jiang, P.; Tanaka, T.: A review of dielectric polymer composites with high thermal conductivity. IEEE Electr. Insul. Mag. 27(4), 8–16 (2011)
Montanari, G.C.; Fabiani, D.; Palmieri, F.; Kaempfer, D.K.; Thomann, R.; Multhaupt, R.: Modification of electrical properties and performance of EVA and PP insulation through nanostructure by organophilic silicates. IEEE Trans. Dielectr. Electr. Insul. 11, 754–762 (2004)
Tanaka, Toshikatsu: Dielectric nano composites with insulating properties. IEEE Trans. Dielectr. Electr. Insul. 12(5), 914–928 (2005)
Zhou, T.; Wang, X.; Cheng, P.; Wang, T.; Xiong, D.; Wang, X.: Improving the thermal conductivity of epoxy resin by the addition of a mixture of graphite nanoplatelets and silicon carbide microparticles. Express Polym. Lett. 7(7), 585–594 (2013)
Jin, H.; Morshuis, P.; Rodrigo Mor, A.; Andritsch, T.: An investigation into dynamics of partial discharge propagation in mineral oil based nanofluids, pp. 1–4. IEEE Int. Conf. Liq. Dielectr., Slovenia (2014)
Hoffmann, C; Jenau, F.: On surface degradation mechanisms of epoxy filled with silica nanoparticles caused by partial discharges. In: 10th IEEE International Conference on Solid Dielectrics (ICSD), pp. 1–4. (2010)
Hollertz, R.; Pilois, C.; Ariza, D.; Wagberg, L.: Dielectric Response of Kraft Paper from fibres modified by Silica nanoparticles. In: Proceedings of Annual Electrical Insulation and Dielectric Phenomena Conference Report, pp. 459–462. (2015)
Meichsner, C.; Clark, T.; Groeppel, P.: Protective layer of Al2O3 nano-composites and surface composition after electrical stress. IEEE Trans. Dielectr. Electr. Insul. 22(5), 2944–2950 (2015)
Gao, F.; Xiang, M.; Liao, R.; Zhengyu, X.; Wang, J.: The experimental investigation on space charge distribution of cellulose insulation paper modified with alumina Nanoparticles. In: Proceedings of Condition Monitoring and Diagnosis Conferenence, pp. 757–760. (2016)
Liao, R.; Chen, L.; Weiqiang, W.; Liang, N.; Yang, L.: Insulating properties of insulation paper modified by nano-Al2O3 for power transformer. J. Electr. Power Sci. Technol. 29(10401), 3–7 (2014)
Atkison, G.L.; Thomas, W.R.: An epoxy-paper insulation system for high voltage applications. IEEE Trans. Electr. Insul. EI-2(1), 18–24 (1967)
Saha, D.; Anisimov, A.G.; Groves, R.M.; Tsekmes, I.A.; Morshuis, P.H.F.; Kochetov, R.: Epoxy-hBN nano-composites: a study on space charge behavior and effects upon material. IEEE Trans. Dielectr. Electr. Insul. 24(3), 1718–1725 (2017)
Tuncer, E.; Cantoni, C.; Karren, L.; More, D.; James, R.; Polizos, G.; Sauers, I.; Ellis, A.R.: Breakdown properties of epoxy nanodielectric. In: Proceedings of Annual Electrical Insulation and Dielectric Phenomena Conference Report, pp. 459–462. (2010)
Yongsen, H.; Shengtao, L.; Daomin, M.: Nonlinear conduction and surface potential decay of epoxy/SiC nano-composites. IEEE Trans. Dielectr. Electr. Insul. 24(5), 3154–3164 (2017)
Yin Huang, Y.; Daomin, M.; Shengtao, L.; Wang, X.; Shengjun, L.: Dielectric relaxation and carrier transport in epoxy resin and its micro-composite. IEEE Trans. Dielectr. Electr. Insul. 24(5), 3083–3091 (2017)
Jamaludin, F.A.; Ab-Kadir, M.Z.A.; Izadi, M.; Azis, N.; Jasni, J.; Abd Rahman, M.S.: Considering the effects of RTV coating to improve electrical insulation against lightning. Presented at 33rd lightning protection conference, Estoril, Portugal, 2016
Thyssen, A.; Almdal, K.; Thomsen, E.V.: Electret stability related to the crystallinity in polypropylene. IEEE Trans. Dielectr. Electr. Insul. 24(5), 3038–3046 (2017)
Miyoshi, A.: A new additive for improving the thermal aging characteristics of kraft insulating paper. IEEE Trans. Electr. Insul. 10(1), 13–17 (1975)
Kang, B.S.; Levit, M.R.; Marek, R.P.; Wicks, R.C.; Provost, R.L.: Development of a new solid insulation for liquid immersed transformers. In: Proceeding of Electrical Insulation Conference, Philadelphia, Pennsylvania, USA, pp. 344–347. (2014)
Tang, C.; Zhang, S.; Li, X.; Xiong, B.; Xie, J.: Experimental analysis and molecular simulation of the thermal aging of transformer insulating paper. IEEE Trans. Dielectr. Electr. Insul. 22(6), 3608–3616 (2015)
Tuncer, E.; Sauers, I.: Nano-dielectric system for cryogenic applications: barium titanate filled polyvinyl alcohol. IEEE Trans. Dielectr. Electr. Insul. 15(1), 236–242 (2006)
Arroyo-Fernandez, O.H.; Fofana, I.; Jalbert, J.; Rodriguez, E.; Rodriguez, L.B.; Ryadi, M.: Assessing changes in thermally upgraded papers with different nitrogen contents under accelerated aging. IEEE Trans. Dielectr. Electr. Insul. 24(3), 1829–1839 (2017)
Prevost, T.A.: Thermally upgraded insulation in transformers. In: Proceeding of Electrical Insulation Conference and Electrical Manufacturing Expo, pp. 120–125. (2005)
Shuhua, Q.; Chunlua, L.; Ying, H.: Preparation of SiC hybrid phenolic resin composites. In: 57th International Astronautical Congress, pp. 2–6. (2006)
Gardziella, A.; Pilato, L.A.; Knop, A.: Phenolic Resins: Chemistry, Applications, Standardization, Safety and Ecology, p. 566. Springer, Berlin (2013)
Pizzi, A.; Ibeh, C.C.: Phenol–Formaldehydes. Handbook of Thermoset Plastics, pp. 13–44. William Andrew Publishing, New York (2014)
Parvin, P.; Shoursheini, S.Z.; Khalilinejad, F.; Bavali, A.; Gosha, M.M.; Mansouri, B.: Simultaneous fluorescence and breakdown spectroscopy of fresh and aging transformer oil immersed in paper using ArF excimer laser. Opt. Lasers Eng. 50(11), 1672–1676 (2012)
Prevost, T.D.; Oommen, T.V.: Cellulose insulation in oil filled power transformer: part-1—history and development. IEEE Electr. Insul. Mag. 22(1), 28–35 (2006)
Emsley, A.M.; Stevens, G.C.: Review of chemical indicators of degradation of cellulosic electrical paper insulation in oil-filled transformers. IEE Proc.: Sci. Meas. Technol. 141(5), 324–334 (1994)
Method of sampling and test for paper and allied product, Indian Standard, ISO: 1060 (Part-1)-1966, 12th Reprint (2008)
Alamri, H.; Low, I.M.: Effect of water absorption on the mechanical properties of nano-filler reinforced epoxy nanocomposites. Mater. Des. 42, 214–222 (2012)
Water Absorptiveness of Sized (Non-Bibulous), Paper, Paperboard, and Corrugated Fiberboard (Cobb Test), Tappi Standards, T-441 om-09, pp. 1–8. (2013)
Calva, P.A.; Díaz, A.I.; Gutierrez, H.M.: Fillers in electrical papers for power transformers. Adv. Mater. Res. 875–877, 335–340 (2014)
Diaham, S.; Zelmat, S.; Locatelli, M.L.; Dinculescu, S.; Decup, M.; Lebey, T.: Dielectric breakdown of polyimide films: area, thickness and temperature dependence. IEEE Trans. Dielectr. Electr. Insul. 17, 18–27 (2010)
Kim, H.K.; Shi, F.G.: Thickness dependent dielectric strength of a low-permittivity dielectric film. IEEE Trans. Dielectr. Electr. Insul. 8, 248–252 (2001)
Acknowledgements
The authors would like to thank Mahashakti Energy Pvt. Ltd., Bathinda, Punjab, India, for providing raw material and Electra Paper Pvt. Ltd., India, for providing their facilities and valuable assistance in conducting the experiments. The authors also thank I.K.G. Punjab Technical University, Kapurthala, for providing a fruitful environment to complete this research work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jindal, V., Singh, J. Development of New Solid Insulating Material with Aid of Alkyl Phenolic Resin for a Liquid-Immersed Transformer. Arab J Sci Eng 45, 1357–1365 (2020). https://doi.org/10.1007/s13369-019-03919-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-019-03919-2