Abstract
In the present research, a new fifth-order plate theory is developed and applied to evaluate the static response of functionally graded (FG) plates resting on Winkler–Pasternak elastic foundation under nonlinear hygro-thermo-mechanical loading. This theory involves polynomial shape functions expanded up to fifth order in terms of the thickness coordinates. The effects of shear deformation and normal deformation are accounted; hence, it can be called as quasi-3D plate theory and abbreviated as FOSNDT. The theory involves nine unknowns. Zero transverse shear stress conditions at top and bottom surfaces are satisfied using constitutive relations. Analytical solutions are obtained using the double Fourier series technique suggested by Navier. The non-dimensional displacements and stresses are compared with available results.
Similar content being viewed by others
References
Kirchhoff, G.R.: Uber das gleichgewicht und die bewegung einer elastischen Scheibe. J. Reine. Angew. Math. (Crelle’s J) 40, 51–88 (1850)
Mindlin, R.D.: Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates. ASME J. Appl. Mech. 18, 31–38 (1951)
Jha, D.K.; Kant, T.; Singh, R.K.: A critical review of recent research on functionally graded plates. Compos. Struct. 96, 833–849 (2013)
Swaminathan, K.; Naveenkumar, D.T.; Zenkour, A.M.; Carrera, E.: Stress, vibration and buckling analyses of FGM plates-A state-of-the-art review. Compos. Struct. 120, 10–31 (2015)
Swaminathan, K.; Sangeetha, D.M.: Thermal analysis of FGM plates—a critical review of various modeling techniques and solution methods. Compos. Struct. 160, 43–60 (2017)
Sayyad, A.S.; Ghugal, Y.M.: On the free vibration analysis of laminated composite and sandwich plates: a review of recent literature with some numerical results. Compos. Struct. 129, 177–201 (2015)
Sayyad, A.S.; Ghugal, Y.M.: Bending, buckling and free vibration of laminated composite and sandwich beams: a critical review of literature. Compos. Struct. 171, 486–504 (2017)
Sayyad, A.S.; Ghugal, Y.M.: Modeling and analysis of functionally graded sandwich: a review. Mech. Adv. Mater. Struct. (2018). https://doi.org/10.1080/15376494.2018.1447178
Zenkour, A.M.: Generalized shear deformation theory for bending analysis of functionally graded plates. Appl. Math. Model. 30, 67–84 (2006)
Ameur, M.; Tounsi, V.; Mechab, I.; Bedia, E.A.: A trigonometric shear deformation theory for bending analysis of functionally graded plates resting on elastic foundations. KSCE J. Civ. Eng. 15, 1405–1414 (2011)
Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Cinefra, M.; Roque, C.M.C.; Jorge, R.M.N.; Soares, C.M.M.: A quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates. Compos. Struct. 94, 1814–1825 (2012)
Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Cinefra, M.; Roque, C.M.C.; Jorge, R.M.N.; Soares, C.M.M.: A quasi-3D sinusoidal shear deformation and free vibration analysis of functionally graded plates. Compos. Part B-Eng. 43, 711–725 (2012)
Thai, H.T.; Choi, D.H.: A simple refined theory for bending, buckling and vibration of thick plates resting on elastic foundation. Int. J. Mech. Sci. 73, 40–52 (2013)
Thai, H.T.; Choi, D.H.: Finite element formulation of various four unknown shear deformation theories for functionally graded plates. Finite Elem. Anal. Des. 75, 50–61 (2013)
Sayyad, A.S.; Ghugal, Y.M.: A unified shear deformation theory for the bending of isotropic, functionally graded, laminated and sandwich plates. Int. J. Appl. Mech. 9(1), 1–36 (2017)
Carrera, E.; Brischetto, S.; Robaldo, A.: Variable kinematic model for the analysis of functionally graded material plates. AIAA J. 46, 194–203 (2008)
Carrera, E.; Brischetto, S.; Cinefra, M.; Soave, M.: Effect of thickness stretching in functionally graded plates and shells. Compos. Part B-Eng. 42(2), 123–133 (2011)
Sayyad, A.S.; Ghugal, Y.M.: A four-variable plate theory for thermoelastic bending analysis of laminated composite plates. J. Therm. Stresses 38, 904–925 (2015)
Sayyad, A.S.; Ghugal, Y.M.: Thermoelastic bending analysis of laminated composite plates according to various shear deformation theories. Open Engg. 5, 18–30 (2015)
Sayyad, A.S.; Ghugal, Y.M.: Thermal stress analysis of laminated composite plates using exponential shear deformation theory. Int. J. Auto. Compos. 2(1), 23–40 (2016)
Zenkour, A.M.; Sobhy, M.: Thermal buckling of various types of FGM sandwich plates. Compos. Struct. 93, 93–102 (2010)
Zenkour, A.M.; Sobhy, M.: Thermal buckling of functionally graded plates resting on elastic foundations using the trigonometric theory. J. Therm. Stresses 93, 1119–1138 (2011)
Tounsi, A.; Houari, M.S.A.; Benyoucef, S.; Bedia, E.A.A.: A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plate. Aerosp. Sci. Technol. 24, 209–220 (2013)
Zhao, X.; Lee, Y.Y.; Liew, K.M.: Mechanical and thermal buckling analysis of functionally graded plates. Compos. Struct. 90, 161–171 (2009)
Leetsch, R.; Wallmersperger, T.; Kroplin, K.: Thermo-mechanical modeling of functionally graded plates. J. Intell. Mater. Syst. Struct. 20, 1799–1813 (2009)
Akavci, S.S.: Mechanical behavior of functionally graded sandwich plates on elastic foundation. Compos. Part B-Eng. 96, 136–152 (2016)
Akavci, S.S.: An efficient shear deformation theory for free vibration of functionally graded thick rectangular plates on elastic foundation. Compos. Struct. 108, 667–676 (2014)
Thai, H.T.; Choi, D.H.: A refined plate theory for functionally graded plates resting on elastic foundation. Compos. Sci. Technol. 71, 1850–1858 (2011)
Thai, H.T.; Choi, D.H.: A refined shear deformation theory for free vibration of functionally graded plates on elastic foundation. Compos. Part B-Eng. 43, 2335–2347 (2012)
Gao, K.; Gao, W.; Chen, D.; Yang, J.: Nonlinear free vibration of functionally graded graphene platelets reinforced porous nano composite plates resting on elastic foundation. Compos. Struct. 204, 831–846 (2018)
Sheikholeslami, S.A.; Saidi, A.R.: Vibration analysis of functionally graded rectangular plates resting on elastic foundation using higher-order shear and normal deformable plate theory. Compos. Struct. 106, 350–361 (2013)
Zhou, K.; Huang, X.; Tian, J.; Hua, H.: Vibration and flutter analysis of supersonic porous functionally graded material plates with temperature gradient and resting on elastic foundation. Compos. Struct. 204, 63–79 (2018)
Gupta, A.; Talha, M.; Chaudhari, V.K.: Natural frequency of functionally graded plates resting on elastic foundation using finite element method. Procedia Technol. 23, 163–170 (2016)
Li, Q.; Wu, D.; Chen, X.; Liu, L.; Yu, Y.; Gao, W.: Nonlinear vibration and dynamic buckling analyses of sandwich functionally graded porous plate with graphene platelet reinforcement resting on Winkler-Pasternak elastic foundation. Int. J. Mech. Sci. 148, 596–610 (2018)
Bahmyaria, E.; Banatehranib, M.M.; Ahmadic, M.; Bahmyari, M.: Vibration analysis of thin plates resting on Pasternak foundations by element free Galerkin method. Shock Vib. 20, 309–326 (2013)
Zaoui, F.Z.; Ouinas, D.; Tounsi, A.: New 2D and quasi-3D shear deformation theories for free vibration of functionally graded plates on elastic foundations. Compos. Part B-Eng. 159, 231–247 (2019)
Huang, C.S.; Lee, H.T.; Li, P.Y.; Hu, K.C.; Lan, C.W.; Chang, M.J.: Three-dimensional buckling analyses of cracked functionally graded material plates via the MLS-Ritz method. Thin Wall. Struct. 134, 189–202 (2019)
Taczała, M.; Buczkowski, R.; Kleiber, M.: Post buckling analysis of functionally graded plates on an elastic foundation. Compos. Struct. 132, 842–847 (2015)
Thai, H.T.; Kim, S.E.: Closed-form solution for buckling analysis of thick functionally graded plates on elastic foundation. Int. J. Mech. Sci. 75, 34–44 (2013)
Giunta, G.; Crisafulli, D.; Belouettar, S.; Carrera, E.: Hierarchical theories for the free vibration analysis of functionally graded beams. Compos. Struct. 94, 68–74 (2011)
Jung, W.Y.; Han, S.C.; Park, W.T.: Four-variable refined plate theory for forced-vibration analysis of sigmoid functionally graded plates on elastic foundation. Int. J. Mech. Sci. 111(112), 73–87 (2016)
Zenkour, A.M.; Radwan, A.F.: Compressive study of functionally graded plates resting on Winkler-Pasternak foundations under various boundary conditions using hyperbolic shear deformation theory. Arch. Civ. Mech. Eng. 18, 645–658 (2018)
Sayyad, A.S.; Ghugal, Y.M.: A unified five-degree-of freedom theory for the bending analysis of softcore and hardcore functionally graded sandwich beams and plates. J. Sandw. Struct. Mater. (2019). https://doi.org/10.1177/1099636219840980. In press
Sayyad, A.S.; Ghugal, Y.M.: Effects of non-linear hygro-thermo-mechanical loading on bending of FGM rectangular plates resting on two-parameter elastic foundation using four-unknown plate theory. J. Therm. Stresses. (2018). https://doi.org/10.1080/01495739.2018.1469962
Zenkour, A.M.; Allam, M.L.; Radwan, A.F.: Effects of transverse shear and normal strains on FG plates resting on elastic foundations under hygro-thermo-mechanical loading. Int. J. Appl. Mech. 6(5), 1–26 (2014)
Zenkour, A.M.; Radwan, A.F.: Hygro-thermo-mechanical buckling of FGM plates resting on elastic foundations using a quasi-3D model. Int. J. Comput. Meth. Eng. Sci. Mech. (2019). https://doi.org/10.1080/15502287.2019.1568618
Zidi, M.; Taunsi, A.; Hauari, M.; Bedia, E.; Beg, O.A.: Bending analysis of an FGM plates under hygro-thermo-mechanical loading using a four variable refined plate theory. Aerosp. Sci. Technol. 14, 24–34 (2014)
Daouadji, T.H.; Adim, B.; Benferhat, R.: Bending analysis of an imperfect FGM plates under hygro-thermo-mechanical loading with analytical validation. Adv. Mater. Res. 5(1), 35–53 (2016)
Han, J.B.; Liew, K.M.: Numerical differential quadrature method for Reissner/Mindlin plates on two-parameter foundations. Int. J. Mech. Sci. 39, 977–989 (1997)
Carrera, E.; Brischetto, S.: Modeling and analysis of functionally graded beams, plates and shells Part-II. Mech. Adv. Mater. Struct. 18(1), 1–2 (2011)
Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Cinefra, M.; Roque, C.M.C.; Jorge, R.M.N.; Soares, C.M.M.: Bending of FGM plate by a sinusoidal plate formulation and collocation with radial basis functions. Mech. Res. Commun. 38, 368–371 (2011)
Winkler, E.: Die Lehre von der Elasticitaet und Festigkeit. Prag, Dominicus (1867)
Pasternak, P.L.: On a new method of analysis of an elastic foundation by means of two foundation constants. Gosudarstvennoe Izdatelstvo Literaturi po Stroitelstvu i Arkhitekture, Moscow (1954)
Kerr, A. D.: Elastic and viscoelastic foundation models. J. Appl. Mech. 491–498 (1964)
Kerr, A.D.: A study of a new foundation model. 135–136 (1964)
Kutlu, A.; Ugurlu, B.; Omurtag, M.H.; Ergin, A.: Dynamic response of Mindlin plates resting on arbitrarily orthotropic Pasternak foundation and partially in contact with fluid. Ocean Eng. 42, 112–125 (2012)
Abdeen, M.A.M.; Bichir, S.M.: Analysis of simply supported thin FGM rectangular plate resting on fluid layer. Arab. J. Sci. Eng. 38, 3267–3273 (2013)
Rahman, A.A.A.: Closed formed solution for thick plates resting on Kerr foundation. Int. J. Appl. Eng. Res. 12(22), 12133–12143 (2017)
Ta, H.D.; Noh, H.C.: Analytical solution for the dynamic response of functionally graded rectangular plates resting on elastic foundation using a refined plate theory. Appl. Math. Model. 39, 6243–6257 (2015)
Vallabhan, C.V.G.; Daloglu, A.T.: Consistent FEM-Vlasov model for plates on layered soil. J. Strut. Eng. 125, 113–118 (1999)
Kamiya, N.; Sawaki, Y.: An alternative boundary element analysis of plates resting on elastic foundation. Boundary Elements Conf. 561–562 (1986)
Hetenyi, M.: A general solution for the bending of beams on an elastic foundation of arbitrary continuity. J. Appl. Phys. 21, 55–58 (1950)
Chilton, D.S.; Wekezer, J.W.: Plates on elastic foundation. J. Struct. Eng. 116(11), 3236–3241 (1990)
Sheng, C.X.: A free rectangular plate on elastic foundation. J. Appl. Math. Mech. 13(10), 977–982 (1992)
Shen, H.S.; Xiang, Y.; Lin, F.: Nonlinear bending of functionally graded grapheme reinforced composite laminated plates resting on elastic foundations in thermal environments. Compos. Struct. 170, 80–90 (2017)
Najafi, F.; Shojaeefard, M.H.; Googarchin, H.S.: Nonlinear low-velocity impact response of functionally graded plate with nonlinear three-parameter elastic foundation in thermal field. Compos. Part B-Eng. 107, 123–140 (2016)
Adineh, M.; Kadkhodayan, M.: Three-dimensional thermo-elastic analysis and dynamic response of a multi-directional functionally graded skew plate on elastic foundation. Compos. Part B-Eng. 125, 227–240 (2017)
Alimirzaei, S.; Sadighi, B.M.; Nikbakht, A.: Wave propagation analysis in viscoelastic thick composite plates resting on Visco-Pasternak foundation by means of quasi-3D sinusoidal shear deformation theory. Eur. J. Mech. A Solids. 74, 1–15 (2019)
Dogruoglu, A.N.; Omurtag, M.H.: Stability analysis of composite-plate foundation interaction by mixed FEM. J. Eng. Mech. 126, 928–936 (2000)
Ayvaz, Y.; Daloglu, A.; Dogangun, A.: Application of a modified Vlasov model to earthquake analysis of plates resting on elastic foundations. J. Sound Vib. 212(3), 388–498 (1998)
Daloglu, A.T.; Ozgan, K.: The effective depth of soil stratum for plates resting on elastic foundation. Struct. Eng. Mech. 18(2), 1–12 (2004)
Bodaghi, M.; Saidi, A.R.: Stability analysis of functionally graded rectangular plates under nonlinearly varying in-plane loading resting on elastic foundation. Arch. Appl. Mech. 81, 765–780 (2011)
Li, Z.D.; Yang, T.Q.; Luo, W.B.: An improved model for bending of thin viscoelastic plate on elastic foundation. Sci. Res. 1(2), 120–123 (2009)
Zenkour, A.M.; Sobhy, M.: Elastic foundation analysis of uniformly loaded functionally graded viscoelastic sandwich plates. J. Mech. 28(03), 439–452 (2012)
Zhang, C.; Zhu, H.; Shi, B.; Liu, L.: Theoretical investigation of interaction between a rectangular plate and fractional viscoelastic foundation. J. Rock Mech. Geotech. Eng. 6, 373–379 (2014)
Gupta, U.S.; Sharma, S.; Singhal, P.: Effect of two-parameter foundation on free transverse vibration of non-homogeneous orthotropic rectangular plate of linearly varying thickness. Int. J. Eng. Sci. 6(2), 32–51 (2014)
Gupta, U.S.; Sharma, S.; Singhal, P.: DQM modeling of rectangular plate resting on two parameter foundation. Eng. Solid Mech. 4, 33–44 (2016)
Ozcelikors, Y.; Omurtag, M.H.; Demir, H.: Analysis of orthotropic plate-foundation interaction by mixed finite element formulation using Gateaux differential. Comput. Struct. 62(1), 93–106 (1997)
Naderi, A.; Saidi, A.R.: Exact solution for stability analysis of moderately thick functionally graded sector plates on elastic foundation. Compos. Struct. 93, 629–638 (2011)
Zenkour, A.M.; Allam, M.N.M.; Shaker, M.O.; Radwan, A.F.: On the simple and mixed first-order theories for plates resting on elastic foundations. Acta Mech. 220, 33–46 (2011)
Kiani, Y.; Akbarzadeh, A.H.; Chen, Z.T.; Eslami, M.R.: Static and dynamic analysis of an FGM doubly curved panel resting on the Pasternak-type elastic foundation. Compos. Struct. 94, 2474–2484 (2012)
Civalek, O.: Harmonic differential quadrature-finite differences coupled approaches for geometrically nonlinear static and dynamic analysis of rectangular plates on elastic foundation. J. Sound Vib. 294, 966–980 (2006)
Buczkowski, R.; Taczała, M.; Kleiber, M.: A 16-node locking-free Mindlin plate resting on two-parameter elastic foundation-static and eigenvalue analysis. Comput. Assist. Meth. Eng. Sci. 22, 99–114 (2015)
Zenkour, A.M.: The refined sinusoidal theory for FGM plates on elastic foundations. Int. J. Mech. Sci. 51, 869–880 (2009)
Omurtag, M.H.; Ozutok, A.; Akoz, A.Y.: Free vibration analysis of Kirchhoff plates resting on elastic foundation by mixed finite element formulation based on gateaux differential. Int. J. Numer. Meth. Eng. 40, 295–317 (1997)
Sayyad, A.S.; Ghugal, Y.M.: Bending of shear deformable plates resting on Winkler foundations according to trigonometric plate theory. J. Appl. Comput. Mech. 4(3), 187–201 (2018)
Sayyad, A.S.; Ghugal, Y.M.: An inverse hyperbolic theory for FG beams resting on Winkler-Pasternak elastic foundation. Adv. Aircr. Spacecr. Sci. 5(6), 671–689 (2018)
Ghumare, S.M.; Sayyad, A.S.: A new fifth-order shear and normal deformation theory for static bending and elastic buckling of P-FGM beams. Lat. Am. J. Solids Struct. 14, 1893–1911 (2017)
Ghumare, S.M.; Sayyad, A.S.: A new quasi-3D model for functionally graded plates. J. Appl. Comput. Mech. 5(2), 367–380 (2019)
Naik, N.S.; Sayyad, A.S.: 2D analysis of laminated composite and sandwich plates using new fifth order theory. Lat. Am. J. Solids Struct. 15(9), 114–125 (2018)
Naik, N.S.; Sayyad, A.S.: 1D analysis of laminated composite and sandwich plates using a new fifth-order plate theory. Lat. Am. J. Solids Struct. 15, 1–17 (2018)
Naik, N.S.; Sayyad, A.S.: An accurate computational model for thermal analysis of laminated composite and sandwich plates. J. Therm. Stresses. (2019). https://doi.org/10.1080/01495739.2018.1522986
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ghumare, S.M., Sayyad, A.S. Nonlinear Hygro-Thermo-Mechanical Analysis of Functionally Graded Plates Using a Fifth-Order Plate Theory. Arab J Sci Eng 44, 8727–8745 (2019). https://doi.org/10.1007/s13369-019-03894-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-019-03894-8