Abstract
In this study, a Ritz method-based solution of the corner supported thin rectangular plate under different symmetrical loading is presented. The load can be uniformly distributed, symmetrically applied point, patched, or line loads or any type of load applied symmetrically about the plate axes. A two-dimensional polynomial that satisfies the essential boundary conditions (zero deflection at the corners) is proposed to approximate the deflection of the plate. The results are found to be in an excellent agreement with the literature and finite element results. For cases of point loads, however, the proposed polynomial as well as the previously proposed methods in the literature are not capable of capturing the singularity under the point loads. As a remedy to this problem, the proposed polynomial expression is strengthened with the fundamental solution. The strengthened polynomial is found to be able to capture the singularity as well as to accurately satisfy the natural boundary conditions at the free edges.
Similar content being viewed by others
References
Timoshenko, S.P.; Woinowsky-Krieger, S.: Theory of plates and shells. McGraw-hill, New York City (1959)
Lee, S.L.; Basslessteros, P.: Uniformly loaded rectangular plate supported at the corners. Int. J. Mech. Sci. 2(3), 206–211 (1960)
Karasudhi, P.: Foundations of Solid Mechanics, vol. 3. Springer, Berlin (2012)
Peng-cheng, L.: Bending of corner supported rectangular plate under concentrated loads. Appl. Math. Mech. 5(3), 1409–1417 (1984)
Wang, C.M.; Wang, Y.C.; Reddy, J.N.: Problems and remedy for the Ritz method in determining stress resultants of corner supported rectangular plates. Comput. Struct. 80(2), 145–154 (2002)
Lim, C.W.; Yao, W.A.; Cui, S.: Benchmark symplectic solutions for bending of corner-supported rectangular thin plates. IES J. Part A Civ. Struct. Eng. 1(2), 106–115 (2008)
Li, R.; Wang, B.; Li, P.: Hamiltonian system-based benchmark bending solutions of rectangular thin plates with a corner point-supported. Int. J. Mech. Sci. 85, 212–218 (2014)
Batista, M.: New analytical solution for bending problem of uniformly loaded rectangular plate supported on corner points. IES J. Part A Civ. Struct. Eng. ISSN 3(2), 75–84 (2010)
Batista, M.: Discussion of ‘Benchmark symplectic solutions for bending of corner-supported rectangular thin plates’ by C.W. Lim, W.A. Yao and S. Cui. IES J. Part A Civ. Struct. Eng. 3(1), 70–70 (2010)
Lim, C.W.; Yao, W.A.: Closure on discussion of ‘ Benchmark symplectic solutions for bending of corner-supported rectangular thin plates ’ by M. Batista. IES J. Part A Civ. Struct. Eng. 3(1), 71–73 (2010)
Davies, J.D.; Ma, S.P.K.; Cheung, Y.K.: Analysis of corner supported skew slabs. Build. Sci. 3(2), 81–92 (1968)
Rajaiah, A.; Rao, K.: Collocation solution for point-supported square plates. ASME J. Appl. Mech. 45(2), 424–425 (1978)
Watts, G.; Singha, M.K.; Pradyumna, S.: A numerical study on the nonlinear behavior of corner. Arch. Appl. Mech. 88, 1–14 (2017)
Vijakkhana, C.; Karasudhi, P.; Lee, S.L.: Corner supported equilateral triangular plates. Int. J. Mech. Sci. 15(2), 123–128 (1973)
Suriyamongkol, S.; Suriya, P.: Corner supported equilateral triangular plate subjected to a concentrated load at the center. Int. J. Mech. Sci. 23(1), 49–55 (1981)
Shanmugam, N.E.; Huang, R.; Yu, C.H.; Lee, S.L.: Uniformly loaded rhombic orthotropic plates supported at corners. Comput. Struct. 30(5), 1037–1045 (1988)
Altekin, M.; Altay, G.: Static analysis of point-supported super-elliptical plates. Arch. Appl. Mech. 78(4), 259–266 (2008)
Ugural, A.C.: Stresses in Beams, Plates, and Shells. CRC Press, Boca Raton (2009)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Al-Shugaa, M.A., Musa, A.E.S. & Al-Gahtani, H.J. Analysis of Corner Supported Plates Under Symmetrical Loading. Arab J Sci Eng 44, 8707–8715 (2019). https://doi.org/10.1007/s13369-019-03811-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-019-03811-z