Abstract
This work reports a thermodynamic assessment of EAFD chlorination products stem from thermal decomposition products of PVC. Upon PVC pyrolysis, HCl gas is liberated in conjunction with several volatile organic matters leaving solid carbonaceous residue. EAFD contains appreciable quantities of zinc, iron and lead oxides. These react with HCl to form metal chlorides, if EAFD is added to the PVC as a dechlorination agent. Selective chlorination of zinc and lead present in EAFD leaving iron in its oxide form is of an apparent commercial value. Detailed thermodynamic analysis of EAFD chlorination by HCl was performed considering the effects of several variables. These include temperature, amount of chlorination agent, presence of oxidizing agent and the effect of presence of other EAFD constituents such as sodium, potassium, calcium, silicon and sulfur. It was found that 100% recovery of both zinc and lead can be achieved for mixture containing 50% EAFD and 50% PVC when pyrolyzed under inert conditions, but contaminated with at least 20% of the iron chloride. However, when thermal treatment is performed in the presence of oxygen, the 100% zinc and lead recoveries were achieved at lower temperature with a minimal iron contamination (< 2.6%). Removal of sodium and potassium chloride from EAFD prior to pyrolysis by washing, under oxidizing condition, has also resulted in great selectivity in zinc and lead chlorination. The behavior of other elements during chlorination process was also discussed. The results obtained shall be instrumental in efforts aiming to achieve optimum recycling operations for both categories of pollutants.
Similar content being viewed by others
References
Al-Harahsheh, M.; Aljarrah, M.; Rummanah, F.; Abdellateef, K.; Kingman, S.: Leaching of valuable metals from electric arc furnace dust—tetrabromobisphenol A pyrolysis residues. J. Anal. Appl. Pyrol. 125, 50–60 (2017)
Al-Harahsheh, M.; Al-Otoom, A.; Al-Makhadmah, L.; Hamilton, I.E.; Kingman, S.; Al-Asheh, S.; Hararah, M.A.: Pyrolysis of poly(vinyl chloride) and–electric arc furnacedust mixtures. J. Hazard. Mater. 299, 425–436 (2015)
Gomes, H.I.; Mayes, W.M.; Rogerson, M.; Stewart, D.I.; Burke, I.T.: Alkaline residues and the environment: a review of impacts, management practices and opportunities. J. Clean. Prod. 112, 3571–3582 (2016)
Lin, X.; Peng, Z.; Yan, J.; Li, Z.; Hwang, J.-Y.; Zhang, Y.; Li, G.; Jiang, T.: Pyrometallurgical recycling of electric arc furnace dust. J. Clean. Prod. 149, 1079–1100 (2017)
Nolasco-Sobrinho, P.J.; Espinosa, D.C.R.; Tenório, J.A.S.: Characterisation of dusts and sludges generated during stainless steel production in Brazilian industries. Ironmak. Steelmak. 30, 11–17 (2003)
Santos, F.; Brocchi, E.; Araújo, V.; Souza, R.: Behavior of Zn and Fe content in electric arc furnace dust as submitted to chlorination methods. Metall. Mater. Trans. B 46, 1729–1741 (2015)
Chairaksa-Fujimoto, R.; Maruyama, K.; Miki, T.; Nagasaka, T.: The selective alkaline leaching of zinc oxide from electric arc furnace dust pre-treated with calcium oxide. Hydrometallurgy 159, 120–125 (2016)
Oustadakis, P.; Tsakiridis, P.E.; Katsiapi, A.; Agatzini-Leonardou, S.: Hydrometallurgical process for zinc recovery from electric arc furnace dust (EAFD): part I: characterization and leaching by diluted sulphuric acid. J. Hazard. Mater. 179, 1–7 (2010)
Dutra, A.J.B.; Paiva, P.R.P.; Tavares, L.M.: Alkaline leaching of zinc from electric arc furnace steel dust. Miner. Eng. 19, 478–485 (2006)
Havlik, T.; Turzakova, M.; Stopic, S.; Friedrich, B.: Atmospheric leaching of EAF dust with diluted sulphuric acid. Hydrometallurgy 77, 41–50 (2005)
Jarupisitthorn, C.; Pimtong, T.; Lothongkum, G.: Investigation of kinetics of zinc leaching from electric arc furnace dust by sodium hydroxide. Mater. Chem. Phys. 77, 531–535 (2003)
Baik, D.S.; Fray, D.J.: Recovery of zinc from electric-arc furnace dust by leaching with aqueous hydrochloric acid, plating of zinc and regeneration of electrolyte. Miner. Process. Extr. Metall. 109, 121–128 (2000)
Zhang, H.; Li, J.; Xu, A.; Yang, Q.; He, D.; Tian, N.: Carbothermic reduction of zinc and iron oxides in electric arc furnace dust. J. Iron. Steel Res. Int. 21, 427–432 (2014)
Suetens, T.; Klaasen, B.; Van Acker, K.; Blanpain, B.: Comparison of electric arc furnace dust treatment technologies using exergy efficiency. J. Clean. Prod. 65, 152–167 (2014)
Morcali, M.H.; Yucel, O.; Aydin, A.; Derin, B.: Carbothermic reduction of electric arc furnace dust and calcination of waelz oxide by semi-pilot scale rotary furnace. J. Min. Metall. 48, 173–184 (2012)
Ruiz, O.; Clemente, C.; Alonso, M.; Alguacil, F.J.: Recycling of an electric arc furnace flue dust to obtain high grade ZnO. J. Hazard. Mater. 141, 33–36 (2007)
Oda, H.; Ibaraki, T.; Abe, Y.: Dust recycling system by the rotary hearth furnace. In: Nippon Steel Technical Report, pp. 147–152 (2006)
Yoo, J.-M.; Kim, B.-S.; Lee, J.-C.; Kim, M.-S.; Nam, C.-W.: Kinetics of the volatilization removal of lead in electric arc furnace dust. Mater. Trans. JIM 46, 323–328 (2005)
Liebman, M.: The current status of electric arc furnace dust recycling in North America. In: Proceedings of the TMS Fall Extraction and Processing Conference, pp. 237–250 (2000)
Rütten, J.; Frias, C.; Diaz, G.; Martin, D.; Sanchez, F.: Processing EAF dust through Waelz Kiln and ZINCEXTM solvent extraction: the optimum solution. In: European Metallurgical Conference, SME, Düsseldorf/ Germany, pp. 1673–1688 (2011)
Sadat-Shojai, M.; Bakhshandeh, G.-R.: Recycling of PVC wastes. Polym. Degrad. Stab. 96, 404–415 (2011)
Ahubelem, N.; Shah, K.; Moghtaderi, B.; Altarawneh, M.; Dlugogorski, B.Z.; Page, A.J.: Formation of chlorobenzenes by oxidative thermal decomposition of 1,3-dichloropropene. Combust. Flame 162, 2414–2421 (2015)
Pi, H.; Xiong, Y.; Guo*, S.: The kinetic studies of elimination of HCL during thermal decomposition of PVC in the presence of transition metal oxides. Polym.-Plast. Technol. Eng. 44, 275–288 (2005)
Tailoka, F.; Fray, D.J.: Use of PVC as a chlorinating agent in the recycling of metals. In: Mishra, B. (ed.) EPD Congress, pp. 475–493. TMS, Warrendale (1997)
Masuda, Y.; Uda, T.; Terakado, O.; Hirasawa, M.: Pyrolysis study of poly(vinyl chloride)-metal oxide mixtures: quantitative product analysis and the chlorine fixing ability of metal oxides. J. Anal. Appl. Pyrol. 77, 159–168 (2006)
Yanik, J.; Uddin, M.A.; Ikeuchi, K.; Sakata, Y.: The catalytic effect of Red Mud on the degradation of poly (vinyl chloride) containing polymer mixture into fuel oil. Polym. Degrad. Stab. 73, 335–346 (2001)
Oh, S.C.; Kwon, W.T.; Kim, S.R.: Dehydrochlorination characteristics of waste PVC wires by thermal decomposition. J. Ind. Eng. Chem. 15, 438–441 (2009)
Lee, G.S.; Song, Y.J.: Recycling EAF dust by heat treatment with PVC. Miner. Eng. 20, 739–746 (2007)
Al-Harahsheh, M.; Kingman, S.; Al-Makhadmah, L.; Hamilton, I.E.: Microwave treatment of electric arc furnace dust with PVC: dielectric characterization and pyrolysis-leaching. J. Hazard. Mater. 274, 87–97 (2014)
Pickles, C.A.: Thermodynamic analysis of the selective chlorination of electric arc furnace dust. J. Hazard. Mater. 166, 1030–1042 (2009)
Pickles, C.A.: Thermodynamic analysis of the selective carbothermic reduction of electric arc furnace dust. J. Hazard. Mater. 150, 265–278 (2008)
Wang, Q.; Graydon, J.W.; Kirk, D.W.: Thermodynamic calculation on chlorination treatment for EAF dust with FeCl2. Chongqing Daxue Xuebao, Ziran Kexueban 26, 73–77 (2003)
Matsuura, H.; Tsukihashi, F.: Chlorination and evaporation behaviors of PbO-PbCl2 system in Ar-Cl2-O2 atmosphere. ISIJ Int. 45, 1804–1812 (2005)
Matsuura, H.; Hamano, T.; Tsukihashi, F.: Removal of Zn and Pb from Fe2O3-ZnFe2O4-ZnO-PbO mixture by selective chlorination and evaporation reactions. ISIJ Int. 46, 1113–1119 (2006)
Ahubelem, N.; Altarawneh, M.; Dlugogorski, B.Z.: Unimolecular decomposition of C3Cl6: pathways for formation of cylic chlorinated compounds. Organohalogen Compd. 74, 640–643 (2012)
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Al-Harahsheh, M. Thermodynamic Analysis on the Thermal Treatment of Electric Arc Furnace Dust-PVC Blends. Arab J Sci Eng 43, 5757–5769 (2018). https://doi.org/10.1007/s13369-017-2994-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-017-2994-0