Skip to main content

Multi-objective Optimal Design of a 2-DOF Flexure-Based Mechanism Using Hybrid Approach of Grey-Taguchi Coupled Response Surface Methodology and Entropy Measurement

Abstract

A large displacement and a high first natural frequency are two main concerns for any flexure-based positioning system. A two-degree-of-freedom (DOF) flexure-based mechanism (FBM) with a modified double-lever amplification mechanism is first designed. This study then proposes a multi-objective optimal design of the 2-DOF FBM using the hybrid approach of grey-Taguchi coupled response surface methodology and entropy measurement. The design variables of the 2-DOF FBM include the thickness of the flexure hinges and the length of lever amplification, both of which play vital roles in determining quality responses. The quality responses of the 2-DOF FBM are assessed by measuring the displacement and first natural frequency. The experimental plan is carried out using the Taguchi \({L_{25}}\) orthogonal array. An integrated approach of grey-Taguchi- based response surface methodology and entropy measurement is then applied for the multi-objective optimization of the 2-DOF FBM. To illustrate the relation between the design variables and the output responses, mathematical regression models are developed. The entropy measurement technique is applied to calculate the weight factor corresponding to each response. Then, an analysis of variance (ANOVA) is conducted to determine the significant parameters affecting the responses. In addition, the ANOVA and experimental validations are conducted to validate the statistical adequacy and the prediction accuracy of the developed mathematical models, respectively. The results reveal that the regression models have good statistical adequacy and excellent prediction accuracy. The confirmation results of the grey relational grade fall within 95 % of the confidence interval. It is strongly believed that the proposed approach has great potential for the optimal design of related flexure-based mechanisms.

This is a preview of subscription content, access via your institution.

References

  1. 1

    Teo T.J., Chen I.M., Yang G.: A large deflection and high payload flexure-based parallel manipulator for UV nanoimprint lithography: Part II. Stiffness modeling and performance evaluation. Precis. Eng. 38(4), 872–884 (2014)

    Article  Google Scholar 

  2. 2

    Lin W., Chen W.J.: Fiber assembly of MEMS optical switches with U-groove channels. IEEE Trans. Autom. Sci. Eng. 5(2), 207–215 (2008)

    Article  Google Scholar 

  3. 3

    Dickerson S.M., Hogan J.M., Sugarbaker A., Johnson D.M., Kasevich M.A.: Multiaxis inertial sensing with long-time point source atom interferometry. Phys. Rev. Lett. 111(8), 083001 (2014)

    Article  Google Scholar 

  4. 4

    Li Y.M., Xu Q.S.: A novel piezoactuated xy stage with parallel, and stacked flexure structure for micro-/nanopositioning. IEEE Trans. Ind. Electron. 58(8), 3601–3615 (2011)

    Article  Google Scholar 

  5. 5

    Huang, J.M.; Li, Y.M.: Design and analysis of a completely decoupled compliant parallel XY micro-motion stage. In: Proceedings of the IEEE International Conference on Robotics and Biomimetics, Tianjin, China, pp. 1008–1013 (2010)

  6. 6

    Li Y.M., Huang J.M., Tang H.A.: Compliant parallel xy micromotion stage with kinematic decoupling. IEEE Trans. Autom. Sci. Eng. 9(3), 338–553 (2012)

    Google Scholar 

  7. 7

    Wu, Z.G.; Li, Y.M.; Zhao, X.H.: Comparative analysis of a 2-dof micro-stage with two different types of hinges based on level amplified principle. In: Proceeding of the IEEE International Conference on Automation and Logistics, Zhengzhou, China, pp. 405–410 (2012)

  8. 8

    Xu, Q.S.: Mechanism design and analysis of a novel 2-dof compliant modular microgripper. In: 7th IEEE Conference on Industrial Electronics and Applications (ICIEA), pp. 1966–1971 (2012)

  9. 9

    Tang H., Li Y.M.: Design, analysis, and test of a novel 2-dof nanopositioning system driven by dual mode. IEEE Trans. Robot. 29(3), 650–662 (2013)

    Article  Google Scholar 

  10. 10

    Bhagat U., Shirinzadeh B., Clark L., Qin Y.D., Tian Y.L., Zhang D.W.: Experimental investigation of robust motion tracking control for a 2-dof flexure-based mechanism. IEEE/ASME Trans. Mechatron. 19(6), 1737–1745 (2014)

    Article  Google Scholar 

  11. 11

    Eskandari A., Ouyang P.R.: Design and optimization of a xy compliant mechanical displacement amplifier. Mech. Sci. 4, 303–310 (2013)

    Article  Google Scholar 

  12. 12

    Xu Q.S.: Design and development of a flexure-based dual-stage nanopositioning system with minimum interference behavior. IEEE Trans. Autom. Sci. Eng. 9(3), 554–562 (2012)

    Article  Google Scholar 

  13. 13

    Li, Y.M.; Xu, Q.S.: Design of a new decoupled xy flexure parallel kinematic manipulator with actuator isolation. In: IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 470–475 (2008)

  14. 14

    Li Y.M., Xu Q.S.: Design and analysis of a totally decoupled flexure-based xy parallel micromanipulator. IEEE Trans. Robot. 25(3), 645–656 (2009)

    Article  Google Scholar 

  15. 15

    Tang, H.; Li, Y.M.: Optimal design, modeling and analysis of a 2-dof nanopositioning stage with dual-mode: towards high-rate AFM scanning. In: Intelligent Robots and Systems. Vilamoura, Algarve, Portugal, pp. 658–663 (2012)

  16. 16

    Dao T.P., Huang S.C.: Robust design for a flexible bearing with 1-dof translation using the Taguchi method and the utility concept. J. Mech. Sci. Technol. 29(8), 3309–3320 (2015)

    Article  Google Scholar 

  17. 17

    Tsao C.C., Hocheng H.: Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network. J. Mater. Proces. Technol. 203, 342–348 (2008)

    Article  Google Scholar 

  18. 18

    Altan M.: Reducing shrinkage in injection moldings via the Taguchi, ANOVA and neural network methods. Mater. Des. 31, 599–604 (2010)

    Article  Google Scholar 

  19. 19

    Tzeng Y.F., Chen F.C.: Multi-objective optimisation of high-speed electrical discharge machining process using a Taguchi fuzzy-based approach. Mater. Des. 28, 1159–1168 (2007)

    Article  Google Scholar 

  20. 20

    Pandey A.K., Dubey A.K.: Taguchi based fuzzy logic optimization of multiple quality characteristics in laser cutting of duralumin sheet. Opt. Lasers Eng. 50, 328–335 (2012)

    Article  Google Scholar 

  21. 21

    Ulas C., Ahmet H.A.: Use of the grey relational analysis to determine optimum laser cutting parameters with multi-performance characteristics. Opt. Laser Technol. 40, 987–994 (2008)

    Article  Google Scholar 

  22. 22

    Tsai M.J., Li C.H.: The use of grey relational analysis to determine laser cutting parameters for QFN packages with multiple performance characteristics. Opt. Laser Technol. 41, 914–921 (2009)

    Article  Google Scholar 

  23. 23

    Chiang Y.M., Hsieh H.H.: The use of the Taguchi method with grey relational analysis to optimize the thin-film sputtering process with multiple quality characteristic in color filter manufacturing. Comput. Indus. Eng. 56, 648–661 (2009)

    Article  Google Scholar 

  24. 24

    Wen K.L., Chang T.C., You M.L.: The grey entropy and its application in weighting analysis. Syst., Man, Cybern. IEEE Int. Conf. 2, 1842–1844 (1998)

    Google Scholar 

  25. 25

    Kumar S., Kumar P., Shan H.S.: Effect of evaporative pattern casting process parameters on the surface roughness of Al–7 % Si alloy castings. J. Mater. Proces. Technol. 182, 615–623 (2007)

    Article  Google Scholar 

  26. 26

    Aggarwal A., Singh H., Kumar P., Singh M.: Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi’s technique-A comparative analysis. J. Mater. Proces. Technol. 200, 373–384 (2008)

    Article  Google Scholar 

  27. 27

    Dubey A.K, Yadava V.: Multi-objective optimisation of laser beam cutting process. Opt. Laser Technol. 40, 562–570 (2008)

    Article  Google Scholar 

  28. 28

    Dao T.P., Huang S.C.: Design, fabrication, and predictive model of a 1-dof translational, flexible bearing for high precision mechanism. Trans. Can. Soc. Mech. Eng. 39(3), 419–429 (2015)

    Google Scholar 

  29. 29

    Ilo S., Just C., Xhiku F.: Optimisation of multiple quality characteristics of hardfacing using grey-based Taguchi method. Mater. Des. 33, 459–468 (2012)

    Article  Google Scholar 

  30. 30

    Senthilkumar N., Tamizharasan T., Anandakrishnan V.: Experimental investigation and performance analysis of cemented carbide inserts of different geometries using Taguchi based grey relational analysis. Measurement 58, 520–536 (2014)

    Article  Google Scholar 

  31. 31

    Muthuramalingam T., Mohan B.: Application of Taguchi-grey multi responses optimization on process parameters in electro erosion. Measurement 58, 495–502 (2014)

    Article  Google Scholar 

  32. 32

    Kuo C.F.J., Su T.L., Jhang P.R., Huang C.Y., Chiu C.H.: Using the Taguchi method and grey relational analysis to optimize the flat-plate collector process with multiple quality characteristics in solar energy collector manufacturing. Energy 36, 3554–3562 (2011)

    Article  Google Scholar 

  33. 33

    Datta S., Nandi G., Bandyopadhyay A.: Application of entropy measurement technique in grey based Taguchi method for solution of correlated multiple response optimization problems: A case study in welding. J. Manuf. Syst. 28, 55–63 (2009)

    Article  Google Scholar 

  34. 34

    Sharma A., Yadava V.: Modelling and optimization of cut quality during pulsed Nd: YAG laser cutting of thin Al-alloy sheet for straight profile. Opt. Laser Technol. 44, 159–168 (2012)

    Article  Google Scholar 

  35. 35

    Shigley J.E., Mischke C.R.: Mechanical Engineering Design. McGraw-Hill International Editions, New York (2001)

    Google Scholar 

  36. 36

    Howell L.L.: Compliant Mechanisms. Wiley, New York (2001)

    Google Scholar 

  37. 37

    Montgomery D.C.: Design and Analysis of Experiments. Wiley, New York (1997)

    MATH  Google Scholar 

  38. 38

    Phillip R.: Taguchi Techniques for Quality Engineering. MCgraw-Hill, New York (1996)

    Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Thanh-Phong Dao.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Huang, SC., Dao, TP. Multi-objective Optimal Design of a 2-DOF Flexure-Based Mechanism Using Hybrid Approach of Grey-Taguchi Coupled Response Surface Methodology and Entropy Measurement. Arab J Sci Eng 41, 5215–5231 (2016). https://doi.org/10.1007/s13369-016-2242-z

Download citation

Keywords

  • 2-DOF flexure-based mechanism
  • Flexure hinge
  • Multi-objective optimization
  • Taguchi method
  • Response surface methodology
  • Grey relational analysis
  • Entropy measurement