Abstract
Metal passive energy dissipation dampers are widely used in building structures, but research into their use in high-voltage electrical installations has been limited. This paper employs the passive energy dissipation method for a high-voltage arrester as an example. Metal energy dissipation dampers are designed using the bilinear restoring force model. The factors affecting the damper, including the yield force, yield displacement and ratio between initial and postyield stiffness, which affect the damping efficiency, were analyzed in finite element numerical simulation. The dampers were designed with the optimum parameters found in numerical simulation and were installed at the bottom of an arrester in shake table tests. The dynamic reactions of the arrester with and without dampers were analyzed under the excitation of a resonance wave and artificial waves E and T. Results of simulation and tests show that the dampers designed with the optimum parameters significantly reduced the strain of the bottom of the porcelain bushing, and the damping efficiency increased with the acceleration peak.
Similar content being viewed by others
References
Ishida K., Sawa M., Fujiwara K.: Study of electrical power facilities and measures for planned outages in Japanese hemodialysis clinics after the great east Japan earthquake. Ther. Apher. Dial. 17(1), 65–71 (2013)
Goodno B.J., Gould N.C., Caldwell P.: Effects of the January 2010 Haitian earthquake on selected electrical equipment. Earthq. Spectra 27(1), S251–S276 (2011)
Ilki A., Celep Z.: Earthquakes, existing buildings and seismic design codes in Turkey. Arab. J. Sci. Eng. 37(2), 365–380 (2012)
Ricky W.K.C., Faris A.: Experimental study of steel slit damper for passive energy dissipation. Eng. Struct. 30, 1058–1066 (2008)
Ku T.W., Jeon S.B., Bui V.H., Song W.J., Park M.S., Kang B.S.: Numerical and experimental approach on energy dissipation in nano colloidal damper. J. Mech. Sci. Technol. 21, 1464–1470 (2007)
Michael C.C., Panos T., Wilhelm H., Ani N.S.: Toggle-brace-damper seismic energy dissipation systems. J. Struct. Eng. 127, 105–112 (2001)
Wang, G.X.; Wang, Y.; Zhao, J.: Analysis of energy dissipation and earthquake mitigation of a high-rise building with metal dampers. World Earthq. Eng. 27(4), 1–6 (2011) [In Chinese]
Wu F.S., Huang Y.J., Huang K.: Trispectrum and correlation dimension analysis of magnetorheological damper in vibration screen. J. Cent. South Univ. 19(7), 1832–1838 (2012)
Kelly J.M., Skinner R.I., Heine A.J.: Mechanisms of energy absorption in special devices for use in earthquake resistant structures. Bull N. Z. Natl. Soc. Earthq. Eng. 5(3), 63–88 (1972)
Masayoshi N., Kazuhiro S., Bunzo T.: Energy input and dissipation behaviour of structures with hysteretic dampers. Earthq. Eng. Struct. Dyn. 25, 483–496 (1996)
Lópeza I., Busturiab J.M., Nijmeijera H.: Energy dissipation of a friction damper. J. Sound Vib. 278, 539–561 (2004)
Chuan X., Robert D.H.: Influence of adas element parameters on building seismic response. J. Struct. Eng. 118, 1903–1918 (1992)
Choi, I.R.; Hong, G.P.: Hysteresis model of thin install plate for cyclic nonlinear analysis of steel plate shear walls. J. Struct. Eng. 136(11), 1423–1434 (2010)
Whittaker, A.S.; Bertero, V.V.; Alonson, L.J.: Earthquake simulator testing of steel plate added damping and stiffness elements. Earthquake Engineering Research Center, University of California at Berkeley (1989)
Tena C.A.: Mathematical modeling of the adas energy dissipation device. Eng. Struct. 19(10), 811–821 (1997)
Dargush G.F., Soong T.T.: Behavior of metallic plate dampers in seismic passive energy dissipation system. Earthq. Spectra. 11(4), 545–568 (1995)
He X.H., Lou M.L.: Study on seismic responses of large UHV DC generators. Struct. Eng. 24(6), 100–105 (2008) [In Chinese]
Li X., Ju Y.Z., Li X.: Anti-seismic performance of high voltage circuit breakers. East China Electr. Power. 37(4), 618–621 (2009) [In Chinese]
Li X.Y., Chen H., Wu K.: Study on earthquake responses of high-voltage electrical equipment. J. Zhengzhou Univ. (Engineering Science). 23(4), 72–75 (2002) [In Chinese]
Zhang B.Y., Du X.L., Wu Z., Wang G.Q.: The aseismatic analysis of 550 kv high voltage switchgear. Earthq. Resist. Eng. 2, 34–38 (1999) [In Chinese]
Li, Y.Q.: Seismic analysis of the porcelain high-voltage equipments system. Institute of GeoPhysics, China Seismological Bureau, Beijing (2002) [In Chinese]
GB50260-96, Code for design of seismic of electrical installations. China Planning Press, Beijing (1996) [In Chinese]
JEAG500321980, Japan Electrotechnical Standards and Codes Committee. (1980)
IEEEStd.693-2005, IEEE Recommended Practice for Seismic Design of Substations. Institute of Electrical and Electronics Engineers, Inc. 2005
Zhou, Y.; Zhou, F.L.: Energy design method for structure system with energy dissipative devices. World Inf. Earthq. Eng. 13(4), 7–13 (1997) [In Chinese]
Huang F., Lv J.G., Zhu Z.B., Dai Z.B.: Performance analysis of seismic shock protection and damping of GW7-252 isolating switch based on ANSYS. Sci. Technol. Rev. 28(20), 52–57 (2010) [In Chinese]
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Huang, F., Dai, Z., Lu, J. et al. Damping Efficiency Analysis of Metal Dampers for a High-Voltage Electrical Arrester. Arab J Sci Eng 39, 6069–6081 (2014). https://doi.org/10.1007/s13369-014-1291-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-014-1291-4