Abstract
In this paper, we aim to achieve a probabilistic modelling of the compressive strength of concrete using three response surface models (RSM) and the artificial neural network (ANN) method. The input random variables for the three RSM and for the ANN are cement content, water content, measure of slump and air content, while the output for all the models is the compressive strength of concrete at 28 days. More than 800 cylindrical specimens 16\(\times\)32 cm were tested. The experimental data are used to check the reliability of the suggested probabilistic models and their prediction capability. It is shown that the use of these new RSM is as simple as that of any of the basic formulas, yet they provide an improved tool for the prediction of concrete strength and for concrete proportioning. It is also shown that the concrete compressive strength can be readily and accurately estimated from the established ANN.
Similar content being viewed by others
References
Neville A.M.: Properties of Concrete. Longman, Harlow (1995)
Abrams, L.D.: 1919, Properties of Concrete, Cited by Neville A.M., 3rd edn. Pitman, London (1981)
Feret, R.: On the compactness of the mortars. Annales des Ponts et Chaussées, Série 7, 4, 5–164 (1892)
Popovics, S.; Popovics, J.: Computerization of the strength versus W/C relationship. Concr. Int. 17, N° 4, 37–40 (1995)
Ferkous, S.; Houari, H.; Chikh, N.; Mouatsi, M.: Durability of concretes: report, causes and remedies. In: Proceedings of the Second National Seminar of Civil Engineering, Mentouri University, Constantine, Algeria, 24–25 May (1999)
Boukli Hacene, S.M.A.; Ghomari, F.: Study of the compression resistance of local concretes. In: Twelfth International Colloquium on Structural and Geotechnical Engineering, ICSGE, Cairo, Egypt, 10–12, pp. 1005–1014, December (2007)
Boukli Hacene S.M.A., Ghomari F., Khelidj A.: Compressive strengths of concrete formulated with algerian local materials. Jordan J. Civil Eng. 3(2), 103–117 (2009)
Boukli Hacene S.M.A., Ghomari F., Schoefs F., Khelidj A.: Experimental and statistical study of the influence of slump and air content on the compressive strength of concrete. Leban. Sci. J. 10(2), 81–100 (2009)
Shamsad A., Saeid A.: A study on effect of coarse aggregate type on concrete performance. Arab. J. Sci. Eng. 37(7), 1777–1786 (2012)
de Larrard, F.: Concrete Mixture Proportioning-A Scientific Approach. Modern Concrete Technology, vol. 9. E & FN Spon, London (1999)
Favre, J.L.: Safety of Buildings, Risks. Modeling Uncertainty, Reliability, Risk Analysis. Edition Ellipses, Paris (2004)
Algerian Standards: publishing and distribution by Abou Hamou Moussa, Algiers (1992)
Afnor: Concrete and its Constituents. Tome 1: Specifications of Concrete and its Constituents, 5e edn. Paris (2002)
Schoefs F.: Sensitivity approach for modeling the environmental loading of marine structures through a matrix response surface. Reliab Eng Syst Saf. 93(7), 1004–1017 (2007) doi:10.1016/j.ress.2007.05.006
Baroth, J.; Schoefs, F.; Breysse, D.: Construction Reliability: Safety, Randomness, Maintenance, Security. ISTE Willey, New York (2011) (In Press)
Faravelli, L.: Response-surface approach for reliability analysis, J. Eng. Mech. 115(12), 2763, 19 (1989). doi:10.1061/(ASCE)0733-9399
Labeyrie, J.: Response Surface Methodology in Structural Reliability. Probabilistic Methods for Structural Design. In: Guedes Soares, C. (ed.) Solid Mechanics and its Applications, vol. 56. Kluwer Academic Publishers, London, pp. 39–58 (1997)
Matlob A.S., Kamarudin R.A., Jubri Z., Ramli Z.: Using the response surface methodology to optimize the extraction of silica and alumina from coal fly ash for the synthesis of zeolite Na-A. Arab. J. Sci. Eng. 37(1), 27–40 (2012)
Leira, B.J.; Holmås, T.; Ferfjord, K.: Response surface parametrization for estimation of fatigue damage and extreme response of marine structures. In: Der Kiureghian, A.; Madanat, S.; Pestana, J.M. (ed.) 9th International Conference on Application of Statistics and Probability in Civil Engineering, (ICASP9), Theme E “Damage and Deterioration”, vol. 1. Millpress, Rotterdam, pp. 589–598 (2003)
Hecht-Nielsen, R.: Theory of the Back-Propagation neural network. In: Wechsler, H. (ed.) Neural networks for perception, vol. 2. Academic Press, San Diego, pp. 65–93 (1991)
Wang J.Z., Ni H.G.: Prediction of compressive strength of cement based upon BP neural networks. J. Chin. Ceram. Soc. 27(4), 408–414 (1999)
Ni H.G., Wang J.Z.: Prediction of compressive strength of concrete by neural networks. Cement Concr. Res. 30, 1245–1250 (2000)
Mirza, F.A.M.; El-Bisy, M.S.: Predictions of compressive strength of structural lightweight concrete using artificial neural networks. In: 5th International Conference of Engineering Computational Technology, Spain (2006)
Kewalramani A.M., Gupta R.: Concrete compressive strength prediction using ultrasonic pulse velocity through artificial neural networks. Auto Constr. 15(15), 374–379 (2006)
Topcu I.B., Saridemir M.: Prediction of compressive strength of concrete containing fly ash using Artificial Neural Networks and Fuzzy Logic. SciDirect Comput. Mater. Sci 41(3), 305–311 (2008)
Bilgehan M., Turgut P.: The use of neural networks in concrete compressive strength estimation. Comput Concr 7, 271–283 (2010)
Sobhani J., Najimi M., Pourkhorshidi A.R., Parhizkar T.: Prediction of the compression strength of no-slump concrete: a comparative study of regression, neural network and ANFIS models. Construct. Build. Mater. 24, 709–718 (2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Boukli Hacene, S.M.A., Ghomari, F., Schoefs, F. et al. Probabilistic Modelling of Compressive Strength of Concrete Using Response Surface Methodology and Neural Networks. Arab J Sci Eng 39, 4451–4460 (2014). https://doi.org/10.1007/s13369-014-1139-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-014-1139-y