Understanding the guided waves propagation behavior in timber utility poles


Guided stress waves are considered one of the most efficient and reliable techniques that provide sufficient quantitative and qualitative assessment. In this study, we focused on scrutinizing the propagation behavior of guided waves in western white pine timber poles, experimentally, and numerically using COMSOL Multiphysics. Macro fiber composites (MFCs), due to their flexibility and convenience to install on curved profiles, were used to actuate and sense guided waves along the tested specimens. Various solutions for wave mode tuning and characterization have been tested for traction free and embedded boundary conditions. The behavior of propagating wave modes was analyzed and compared in the two boundary conditions tested. Also, the excitation frequency, based on the dispersion curves generated for transversely isotropic timber, was selected to ensure the presence of favorable propagating (for instance longitudinal modes) modes with minimal dispersion. Undesirable wave modes—such as flexural modes (non-axisymmetric)—were eliminated by a ring design composed of multiple MFC actuators coupled around the pole’s circumference. The remaining propagating longitudinal modes and their reflections, such as modes L(0,1) and L(0,2) propagating at nearly 1000 m/s and 800 m/s respectively, were significantly enhanced by the actuation of the ring which could be effectively used for the assessment process. The results demonstrated the complexity of the propagating modes in circular timber structures and the importance of the ring design in the excitation of the selected modes of interest and damping unwanted ones.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22


  1. 1.

    DeGarmo EP, Black JT, Kohser RA, Klamecki BE (1997) Materials and process in manufacturing, 9th edn. Prentice Hall, Upper Saddle River

    Google Scholar 

  2. 2.

    Dinwoodie J (1975) Timber—a review of the structure-mechanical property relationship. J Microsc 104(1):3–32

    Article  Google Scholar 

  3. 3.

    Marquardt R (2012) Extending Wood Pole Life With Remedial Preservatives. https://www.utilityproducts.com/home/article/16002834/extending-wood-pole-life-with-remedial-preservatives. Accessed 1 November 2018

  4. 4.

    Dackermann U, Crews K, Kasal B, Li J, Riggio M, Rinn F, Tannert T (2014) In situ assessment of structural timber using stress-wave measurements. Mater Struct 47(5):787–803

    Article  Google Scholar 

  5. 5.

    Li J, Subhani M, Samali B (2012) Determination of embedment depth of timber poles and piles using wavelet transform. Adv Struct Eng 15(5):759–770

    Article  Google Scholar 

  6. 6.

    Senalik AC, Schueneman G, Ross RJ (2014) Ultrasonic-based nondestructive evaluation methods for wood: a primer and historical review. U.S. Department of Agriculture, Forest Products Laboratory, Madison, WI, pp 1–36

  7. 7.

    Krause M, Dackermann U, Li J (2015) Elastic wave modes for the assessment of structural timber: ultrasonic echo for building elements and guided waves for pole and pile structures. J Civil Struct Health Monit 5(2):221–249

    Article  Google Scholar 

  8. 8.

    Divףs F, Dבniel I, Bejף L (2001) Defect detection in timber by stress wave time and amplitude. NDT 6:3s

  9. 9.

    Wang X, Divos F, Pilon C, Brashaw BK, Ross RJ, Pellerin RF (2004) Assessment of decay in standing timber using stress wave timing nondestructive evaluation tools: a guide for use and interpretation. U.S. Department of Agriculture, Forest Products Laboratory, Madison, WI

  10. 10.

    Subhani M (2014) A Study on the Behaviour of Guided Wave Propagation in Utility Timber Poles. University of Technology Sydney, Ulyimo

    Google Scholar 

  11. 11.

    Dos Santos JA (2008) The application of stress-wave theory to piles: science, technology and practice. In: Proceedings of the 8th International Conference on the Application of Stress-Wave Theory to Piles, 8–10 September 2008. IOS Press, Lisbon

  12. 12.

    Seco F, Jiménez AR (2012) Modelling the generation and propagation of ultrasonic signals in cylindrical waveguides. In: Sanyos A Jr. (ed) Ultrasonic waves. InTechOpen, pp 1–28. https://doi.org/10.5772/1411

  13. 13.

    Gazis DC (1959) Three-dimensional investigation of the propagation of waves in hollow circular cylinders. I. Analytical foundation. J Acoust Soc Am 31(5):568–573

    MathSciNet  Article  Google Scholar 

  14. 14.

    Rose JL (2014) Ultrasonic guided waves in solid media. Cambridge University Press, Cambridge

    Book  Google Scholar 

  15. 15.

    Subhani M, Li J, Samali B (2013) A comparative study of guided wave propagation in timber poles with isotropic and transversely isotropic material models. J Civil Struct Health Monit 3(2):65–79

    Article  Google Scholar 

  16. 16.

    Subhani M, Li JC, Gravenkamp H, Samali B (2013) Effect of elastic modulus and poisson's ratio on guided wave dispersion using transversely isotropic material modelling. Adv Mater Res 778:303–311. https://doi.org/10.4028/www.scientific.net/amr.778.303

    Article  Google Scholar 

  17. 17.

    Green DW, Winandy JE, Kretschmann DE (1999) Wood handbook: wood as an engineering material. U.S. Department of Agriculture, Forest Products Laboratory, Madison, WI, pp 41–445

  18. 18.

    Cavalli A, Cibecchini D, Togni M, Sousa HS (2016) A review on the mechanical properties of aged wood and salvaged timber. Constr Build Mater 114:681–687

    Article  Google Scholar 

  19. 19.

    Subhani M, Li J, Samali B, Crews K (2016) Reducing the effect of wave dispersion in a timber pole based on transversely isotropic material modelling. Constr Build Mater 102:985–998

    Article  Google Scholar 

  20. 20.

    Subhani M, Li J, Samali B (2016) A study of guided wave propagation in timber pole using spectral finite element method. In: 19th World Conference on Non-Destructive Testing (WCNDT 2016). NDT.net, Munich, pp 2242–2251

  21. 21.

    Subhani M, Li J, Samali B, Yan N (2013) Determination of the embedded lengths of electricity timber poles utilising flexural wave generated from impactí. Austr J Struct Eng 14(1):85–96

    Google Scholar 

  22. 22.

    Yu Y, Yan N (2017) Numerical study on guided wave propagation in wood utility poles: finite element modelling and parametric sensitivity analysis. Appl Sci 7(10):1063

    Article  Google Scholar 

  23. 23.

    Yan N, Li J, Dackermann U, Samali B (2013) Numerical and experimental investigations of stress wave propagation in utility poles under soil influence. In: From materials to structures: advancement through innovation-proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials, ACMSM 2012

  24. 24.

    Pavlakovic B, Lowe M (2003) Disperse Software Manual Version 2.0. 1 6B. Imperial College, London

  25. 25.

    Elishakoff I (2007) Mechanical vibration: where do we stand?, vol 488. Springer, New York

  26. 26.

    Kretschmann DE (2010) Mechanical properties of wood. In: Wood handbook: wood as an engineering material, vol 113. Forest Products Laboratory, Wisconsin, pp 5.1–5.46

  27. 27.

    Winston HA, Sun F, Annigeri BS (2001) Structural health monitoring with piezoelectric active sensors. J Eng Gas Turbines Power (Trans ASME) 123(2):353–358

  28. 28.

    Thien AB (2006) Pipeline structural health monitoring using macro-fiber composite active sensors. Dissertation, University of Cincinnati, United States

  29. 29.

    Multiphysics COMSOL (1998) Introduction to COMSOL Multiphysics. In: COMSOL. https://cdn.comsol.com/doc/5.5/IntroductionToCOMSOLMultiphysics.pdf. Accessed 19 Feb 2018

  30. 30.

    Steiger K, Mokrý P (2015) Finite element analysis of the macro fiber composite actuator: macroscopic elastic and piezoelectric properties and active control thereof by means of negative capacitance shunt circuit. Smart Mater Struct 24(2):025026

    Article  Google Scholar 

  31. 31.

    Subhani M, Li J, Samali B (2016) Separation of longitudinal and flexural wave in a cylindrical structure based on sensor arrangement for non-destructive evaluation. J Civil struct Health Monit 6(3):411–427

    Article  Google Scholar 

  32. 32.

    Marburg S (2002) Six boundary elements per wavelength: Is that enough? J Comput Acoust 10(01):25–51

    Article  Google Scholar 

  33. 33.

    Mustapha S, Ye L (2014) Leaky and non-leaky behaviours of guided waves in CF/EP sandwich structures. Wave Motion 51(6):905–918

    Article  Google Scholar 

  34. 34.

    Lovelace WR (2005) The wood pole 2005: Design considerations, service benefits, and economic reward. Hi-Line Engineering, LLC, Tech Rep

  35. 35.

    Duan W, Liao X, Jin J, Wang Y (2001) Numerical modeling of pile-soil interface and numerical analysis of single pile QS curve. J Harbin Univ Civil Eng Archit 5

  36. 36.

    Vanlangen H (1991) Numerical analysis of soil-structure interaction. Doctoral Thesis, Technische Univ., Delft. Geotechnical Lab., The Netherlands

  37. 37.

    Zhang G, Zhang J-M (2009) Numerical modeling of soil–structure interface of a concrete-faced rockfill dam. Comput Geotech 36(5):762–772

    Article  Google Scholar 

  38. 38.

    Potts DM, Zdravkovic L, Addenbrooke TI, Higgins KG, Kovacevic N (2001) Finite element analysis in geotechnical engineering: application, vol 2. Thomas Telford, London

    Book  Google Scholar 

  39. 39.

    Bieker D, Rust S (2010) Non-destructive estimation of sapwood and heartwood width in Scots pine (Pinus sylvestris L.). Silva Fennica 44(2):267–273

  40. 40.

    Mergny E, Mateo R, Esteban M, Descamps T, Latteur P (2016) Influence of cracks on the stiffness of timber structural elements. In: World Conference on Timber Engineering (WCTE 2016). Vienna, pp 1–10

  41. 41.

    Colominas MA, Schlotthauer G, Torres ME (2014) Improved complete ensemble EMD: a suitable tool for biomedical signal processing. Biomed Signal Process Control 14:19–29

    Article  Google Scholar 

  42. 42.

    Fakih MA, Mustapha S, Tarraf J, Ayoub G, Hamade R (2018) Detection and assessment of flaws in friction stir welded joints using ultrasonic guided waves: experimental and finite element analysis. Mech Syst Signal Process 101:516–534

    Article  Google Scholar 

Download references


We acknowledge the financial support of the University Research Board at the American University of Beirut for their Award #103780.

Author information



Corresponding author

Correspondence to Samir Mustapha.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

El Najjar, J., Mustapha, S. Understanding the guided waves propagation behavior in timber utility poles. J Civil Struct Health Monit 10, 793–813 (2020). https://doi.org/10.1007/s13349-020-00417-0

Download citation


  • Guided waves
  • Timber structures
  • Structural assessment
  • Finite element analysis
  • Macro fiber composites