Skip to main content
Log in

Influence of Incomplete Soil Plugs on Bearing Capacities of Bucket Foundations in Clay

  • Published:
China Ocean Engineering Aims and scope Submit manuscript

Abstract

Due to the uneven seabed and heaving of soil during pumping, incomplete soil plugs may occur during the installation of bucket foundations, and the impacts on the bearing capacities of bucket foundations need to be evaluated. In this paper, the contact ratio (the ratio of the top diameter of the soil plug to the diameter of the bucket) and the soil plug ratio (the ratio of the soil heave height to the skirt height) are defined to describe the shape and size of the incomplete soil plug. Then, finite element models are established to investigate the bearing capacities of bucket foundations with incomplete soil plugs and the influences of the contact ratios, and the soil plug ratios on the bearing capacities are analyzed. The results show that the vertical bearing capacity of bucket foundations in homogeneous soil continuously improves with the increase of the contact ratio. However, in normally consolidated soil, the vertical bearing capacity barely changes when the contact ratio is smaller than 0.75, while the bearing capacity suddenly increases when the contact ratio increases to 1 due to the change of failure mode. The contact ratio hardly affects the horizontal bearing capacity of bucket foundations. Moreover, the moment bearing capacity improves with the increase of the contact ratio for small aspect ratios, but hardly varies with increasing contact ratio for aspect ratios larger than 0.5. Consequently, the reduction coefficient method is proposed based on this analysis to calculate the bearing capacities of bucket foundations considering the influence of incomplete soil plugs. The comparison results show that the proposed reduction coefficient method can be used to evaluate the influences of incomplete soil plug on the bearing capacities of bucket foundations.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

References

  • Andersen, K.H., Jeanjean, P., Luger, D. and Jostad, H.P., 2005. Centrifuge tests on installation of suction anchors in soft clay, Ocean Engineering, 32(7), 845–863.

    Article  Google Scholar 

  • Andersen, K.H. and Jostad, H.P., 2004. Shear strength along inside of suction anchor skirt wall in clay, Offshore Technology Conference, Houston, Texas.

  • API, 2005. Design and Analysis of Stationkeeping Systems for Floating Structures, API-RP-2SK, American Petroleum Institute, Washington.

    Google Scholar 

  • Baerheim, M., Hoberg, L. and Tjelta, T.I., 1995. Development and structural design of the bucket foundations for the europipe jacket, Offshore Technology Conference, Houston, Texas.

  • Dendani, H. and Colliat, J.L., 2002. Girassol: Design analysis and installation of the suction anchors, Offshore Technology Conference, Houston, Texas.

  • DNV, 2005. Geotechnical Design and Installation of Suction Anchors in Clay, DNV-RP-E303, Det Norske Veritas.

  • Erbrich, C. and Hefer, P., 2002. Installation of the Laminaria suction piles? A case history Offshore Technology Conference, Houston, Texas.

  • Fu, D.F., Gaudin, C., Tian, Y.H., Cassidy, M.J. and Bienen, B., 2017. Uniaxial capacities of skirted circular foundations in clay, Journal of Geotechnical and Geoenvironmental Engineering, 143(7), 04017022.

    Article  Google Scholar 

  • Fu, D.F., Zhang, Y.H. and Yan, Y., 2020. Bearing capacity of a side-rounded suction caisson foundation under general loading in clay, Computers and Geotechnics, 123, 103543.

    Article  Google Scholar 

  • Guo, W., Chu, J. and Kou, H.L., 2016. Model tests of soil heave plug formation in suction caisson, Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 169(2), 214–223.

    Article  Google Scholar 

  • Guo, Y.H., Wang, H.J. and Lian, J.J., 2022. Review of integrated installation technologies for offshore wind turbines: Current progress and future development trends, Energy Conversion and Management, 255, 115319.

    Article  Google Scholar 

  • Hung, L.C. and Kim, S.R., 2012. Evaluation of vertical and horizontal bearing capacities of bucket foundations in clay, Ocean Engineering, 52, 75–82.

    Article  Google Scholar 

  • Kishida, H., 1967. The ultimate bearing capacity of pipe piles in sand, Proceeding of 3rd Asian Regional Conference on Soil Mechanics and Foundation Engineering, Haifa.

  • Liu, R., Yuan, Y., Fu, D.F. and Sun, G.D., 2022. Numerical investigation to the cyclic loading effect on capacities of the offshore embedded circular foundation in clay, Applied Ocean Research, 119, 103022.

    Article  Google Scholar 

  • Liu, B., Zhang, Y.H., Ma, Z.R., Andersen, K.H., Jostad, H.P., Liu, D. H. and Pei, A.G., 2020. Design considerations of suction caisson foundations for offshore wind turbines in Southern China, Applied Ocean Research, 104, 102358.

    Article  Google Scholar 

  • Liu, R., Sun, G.D., Wang, X.L., Chen, G.S. and Yang, X., 2023. The influence of the soil plug on the bearing capacity of bucket foundations in clay, Ships and Offshore Structures, 18(S1), 92–109.

    Article  Google Scholar 

  • Mana, D.S.K., Gourvenec, S. and Randolph, M.F., 2013. Experimental investigation of reverse end bearing of offshore shallow foundations, Canadian Geotechnical Journal, 50(10), 1022–1033.

    Article  Google Scholar 

  • Martin, C.M. and Randolph, M.F., 2001. Applications of the lower and upper bound theorems of plasticity to collapse of circular foundations, Proceedings of the 10th International Conference, International Association of Computer Methods and Advances in Geomechanics, Tucson, 1417–1428.

  • Meyerhof, G.G., 1957. The ultimate bearing capacity of foundations on slopes, Proceedings of the 4th International Conference on Soil Mechanics and Foundation Engineering, pp. 384–387.

  • Rauch, A.F., Olson, R.E., Luke, A.M. and Mecham, E.M., 2003. Measured response during laboratory installation of suction caissons, Proceedings of the Thirteenth International Offshore and Polar Engineering Conference, Honolulu, Hawaii.

  • Senpere, D. and Auvergne, G.A., 1982. Suction anchor piles–a proven alternative to driving or drilling, Offshore Technology Conference, Texas.

  • Shonberg, A., Harte, M., Aghakouchak, A., Brown, C.S.D., Andrade, M.P. and Liingaard, M.A., 2017. Suction bucket jackets for offshore wind turbines: Applications from in situ observations, Proceedings of TC209 Workshop, 19th International Conference on Soil Mechanics and Geotechnical Engineering, Seoul, South Korea, pp. 65–77.

  • Smith, M., 2009. ABAQUS/Standard User’s Manual, Version 6.9, Dassault Systèmes Simulia Corp, Providence, RI.

    Google Scholar 

  • Terzaghi, K., Peck, R.B. and Mesri, G., 1967. Soil Mechanics in Engineering Practice, third ed., John Wiley and Sons, Inc, New York.

    Google Scholar 

  • Tjelta, T.I., 1995. Geotechnical experience from the installation of the Europipe Jacket with bucket foundations, Offshore Technology Conference, Houston, Texas.

  • Tjelta, T.I., 2001. Suction piles: their position and application today, Proceedings of the Eleventh International Offshore and Polar Engineering Conference, Stavanger, Norway.

  • Whittle, A.J. and Germaine, J.T., 1998. Behavior of miniature suction casissons in clay, Offshore Site Investigation and Foundation Behaviour: New Frontiers-Proceedings of an International Conference, London, UK.

  • Xia, H.X., Zhou, X.W., Zhou, M., Niu, F.J. and Zhang, X.H., 2021. Capacity of caissons in stiff-over-soft clay under combined V-H-M loadings, Ocean Engineering, 229, 109007.

    Article  Google Scholar 

  • Xie, T.C., Zhu, H.H., Zhang, C.X. and Zhang, W., 2023. Modeling strip footings on slopes using the material point method, Bulletin of Engineering Geology and the Environment, 82(4), 99.

    Article  Google Scholar 

  • Yang, X.L., Wang, Z.B., Zou, J.F. and Li, L., 2007. Bearing capacity of foundation on slope determined by energy dissipation method and model experiments, Journal of Central South University of Technology, 14(1), 125–128.

    Article  Google Scholar 

  • Zhao, Z.F., Zhou, M., Hu, Y.X. and Hossain, M.S., 2018. Behavior of soil heave inside stiffened caissons being installed in clay, Canadian Geotechnical Journal, 55(5), 698–709.

    Article  Google Scholar 

  • Zhou, H.J. and Randolph, M.F., 2006. Large deformation analysis of suction caisson installation in clay, Canadian Geotechnical Journal, 43(12), 1344–1357.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ji-jian Lian.

Ethics declarations

The authors declare no competing interests.

Additional information

Foundation item: This work was financially supported by the National Science Fund for Distinguished Young Scholars of China (Grant No. 51825904) and the Research on the Form, Design Method and Weathering Resistance of Key Components of Novel Floating Support Structures for Offshore Photovoltaics (Grant No. 2022YFB4200701).

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Li, Hs., Liu, R., Yang, X. et al. Influence of Incomplete Soil Plugs on Bearing Capacities of Bucket Foundations in Clay. China Ocean Eng 38, 144–155 (2024). https://doi.org/10.1007/s13344-024-0012-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13344-024-0012-3

Key words

Navigation