Abstract
The estimation of ship speed in ice ridge fields is important for both route planning and prediction of emergency response time. An analytical method for estimating ship motion in first-year ice ridge is developed based on ice resistance models and ship motion equations, in which the effect of ship speed on ridge resistance is taken into account. Two model tests in level ice and one model test in ice ridge for an icebreaking multipurpose vessel are used to validate and benchmark the presented method. The predicted results including level ice resistances, net thrust and ship motion in the ice ridge field are compared with the model test data. The comparisons show that the presented method can generate reasonable results. The effects of input parameters on ship speed, penetration depth and number of necessary rams to transit ridge have been studied. Based on the calibrated model, insights into the ice resistance and the ship motion are obtained. It is found that the energy consumption of the keel obtained by integral calculation of the keel resistance at the penetration distance is with the same magnitude as the result of the maximum keel resistance multiplied by the ridge length. In addition, the effect of ridge width and keel depth on keel resistance and average transit speed is investigated.
References
Ehle, D., 2012. Ships breaking through sea ice ridges, Proceedings of the 22nd International Offshore and Polar Engineering Conference, Rhodes, Greece.
Gong, H., Polojärvi, A. and Tuhkuri, J., 2017. Preliminary 3D DEM simulations on ridge keel resistance on ships, Proceedings of the 24th International Conference on Port and Ocean Engineering Under Arctic Conditions, Busan, Korea.
Gong, H.Y., Polojärvi, A. and Tuhkuri, J., 2019. Discrete element simulation of the resistance of a ship in unconsolidated ridges, Cold Regions Science and Technology, 167, 102855.
Heinonen, J., 2004. Constitutive Modeling of Ice Rubble in First-Year Ridge Keel, Ph.D. Thesis, Aalto University, Helsinki.
Hisette, Q., Alekseev, A. and Seidel, J., 2017. Discrete element simulation of ship breaking through ice ridges, Proceedings of the 27th International Ocean and Polar Engineering Conference, International Society of Offshore and Polar Engineers, San Francisco, pp. 25–30.
ISO, 2011. Petroleum and Natural Gas Industries–Arctic Offshore Structures, ISO 19906: 2010, ISO, Geneva.
Jeong, S.Y., Lee, C.J. and Cho, S.R., 2010. Ice resistance prediction for standard icebreaker model ship, Proceedings of the Twentieth International Offshore and Polar Engineering Conference, The International Society of Offshore and Polar Engineers, Beijing, China, pp. 1300–1304.
Ji, S.Y., 2016. Discrete element modeling of ice loads on ship and offshore structures, Proceedings of the 7th International Conference on Discrete Element Methods, Springer, Singapore, pp. 45–54.
Juva, M. and Riska, K., 2002. On the Power Requirement in the Finnish-Swedish Ice Class Rules, Winter Navigation Research Board, Helsinki.
Kärnä, T. and Nykänen, E., 2004. An approach for ridge load determination in probabilistic design, Proceedings of the 17th International Symposium on Ice, Russian Federation, St. Petersburg, pp. 42–50.
Kuuliala, L., Kujala, P., Suominen, M. and Montewka, J., 2017. Estimating operability of ships in ridged ice fields, Cold Regions Science and Technology, 135, 51–61.
Leiviskä, T., 1999. Ship’s ridge resistance in model ice, Proceedings of the 15th International Conference on Port and Ocean Engineering under Arctic Conditions.
Li, F., Goerlandt, F., Kujala, P., Lehtiranta, J. and Lensu, M., 2018. Evaluation of selected state-of-the-art methods for ship transit simulation in various ice conditions based on full-scale measurement, Cold Regions Science and Technology, 151, 94–108.
Lindqvist, G., 1989. A straightforward method for calculation of ice resistance of ships, Proceedings of 10th International Conference on Port and Ocean Engineering Under Arctic Conditions, Lulea, Sweden, 722–735.
Malmberg, S., 1983. On the Phenomenon of Getting Stuck in Ice, MSc. Thesis, Helsinki University of Technology, Espoo.
Mellor, M., 1980. Ship resistance in thick brash ice, Cold Regions Science and Technology, 3(4), 305–321.
Myland, D., 2013. Ships breaking through sea ice ridge, International Journal of Offshore and Polar Engineering, 24(1), 28–34.
Riska, K., 1997. Performance of Merchant Vessels in Ice in the Baltic, Helsinki University of Technology, Ship Laboratory, Espoo.
Riska, K., 2007. Application of the SAFEICE Project Results in Developing the Finnish Swedish Ice Class Rules, Deliverable D7-3 from the SAFEICE Project, Kujala (ed), 27p.
Riska, K., 2014. Factors Influencing the Power Requirement in the Finnish-Swedish Ice Class Rules, Consulting Naval Architects & Marine Engineers, Helsinki.
Serré, N., 2011. Numerical modelling of ice ridge keel action on subsea structures, Cold Regions Science and Technology, 67(3), 107–119.
Shafrova, S. and Høyland, K.V., 2008. Morphology and 2D spatial strength distribution in two Arctic first-year sea ice ridges, Cold Regions Science and Technology, 51(1), 38–55.
Song, M., Jiang, Z.Y., Liu, K., Han, Y. and Liu, R.W., 2023. Dynamic response analysis of a monopile-supported offshore wind turbine under the combined effect of sea ice impact and wind load, Ocean Engineering, 286, 115587.
Song, M., Kim, E., Amdahl, J., Ma, J. and Huang, Y., 2016. A comparative analysis of the fluid-structure interaction method and the constant added mass method for ice-structure collisions, Marine Structures, 49, 58–75.
Song, M., Shi, W., Ren, Z.R. and Zhou, L., 2019. Numerical study of the interaction between level ice and wind turbine tower for estimation of ice crushing loads on structure, Journal of Marine Science and Engineering, 7(12), 439.
Strub-Klein, L., Sudom, D., 2012. A comprehensive analysis of the morphology of first-year sea ice ridges, Cold Regions Science and Technology, 82, 94–109.
Tikanmäki, M. and Heinonen, J., 2022. Estimating extreme level ice and ridge thickness for offshore wind turbine design: Case study Kriegers Flak, Wind Energy, 25(4), 639–659.
Zhou, L., Gao, J.L. and Li, D.Q., 2019. An engineering method for simulating dynamic interaction of moored ship with first-year ice ridge, Ocean Engineering, 171, 417–428.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare no competing interests.
Additional information
Foundation item: This work was financially supported by the Natural Science Foundation of Jiangsu Province of China (Grant No. BK20200998) and the National Natural Science Foundation of China (Grant Nos. 52171311, 52271279, and 51579130).
Rights and permissions
About this article
Cite this article
Song, M., Yuan, W., Liu, K. et al. Analysis of Ship Motion in An Ice Ridge Field Based on Empirical Approach. China Ocean Eng 37, 912–922 (2023). https://doi.org/10.1007/s13344-023-0076-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13344-023-0076-5