Abstract
An integrated structural strength analysis method for a Spar type floating wind turbine is proposed in this paper, and technical issues related to turbine structure modeling and stress combination are also addressed. The NREL-5MW “Hywind” Spar type wind turbine is adopted as study object. Time-domain dynamic coupled simulations are performed by a fully-coupled aero-hydro-servo-elastic tool, FAST, on the purpose of obtaining the dynamic characteristics of the floating wind turbine, and determining parameters for design load cases of finite element calculation. Then design load cases are identified, and finite element analyses are performed for these design load cases. The structural stresses due to wave-induced loads and wind-induced loads are calculated, and then combined to assess the structural strength of the floating wind turbine. The feasibility of the proposed structural strength analysis method for floating wind turbines is then validated.
Similar content being viewed by others
References
American Bureau of Shipping (ABS), 2013. Guide for Building and Classing Floating Offshore Wind Turbine Installations.
American Petroleum Institute (API), 2014. Bulletin on Stability Design of Cylindrical Shells, 3rd ed., American Petroleum Institute, Washington, DC, USA.
Aubault, A., Cermelli, C. and Roddier, D., 2009. WindFloat: A floating foundation for offshore wind turbines—Part III: Structural analysis, ASME 2009 28th International Conference on Ocean, Offshore and Arctic Engineering, Honolulu, Hawaii, USA, 213–220.
Butterfield, S., Musial, W. and Scott, G., 2009. Definition of a 5-MW Reference Wind Turbine for Offshore System Development, National Renewable Energy Laboratory, Colorado.
IEC 61400–3, 2006. Wind Turbines–Part 3: Design Requirements for Offshore Wind Turbines, International Electrotechnical Commission (IEC).
Jonkman, J. M. and Buhl, M. L., 2005. FAST User’s Guide, National Renewable Energy Laboratory, Golden, CO.
Jonkman, J. M., 2007. Dynamic Modeling and Load Analysis of An Offshore Floating Wind Turbine, Ph.D. Thesis, Department of Aerospace Engineering Sciences, University of Colorado.
Karimirad, M. and Moan, T., 2011. Extreme dynamic structural response analysis of catenary moored Spar wind turbine in harsh environmental conditions, Journal of Offshore Mechanics and Arctic Engineering, 133(4): 041103.
Kvittem, M. I., Bachynski, E. E. and Moan, T., 2012. Effects of hydrodynamic modelling in fully coupled simulations of a semi-submersible wind turbine, Energy Procedia, 24, 351–362.
Matha, D., 2009. Model Development and Loads Analysis of an Offshore Wind Turbine on a Tension Leg Platform with a Comparison to Other Floating Turbine Concepts, National Renewable Energy Laboratory (NREL), Golden, CO.
Skaare, B, Hanson, T. D., Nielsen, F. G., Yttervik, R., Hansen, A. M., Thomsen, K. and Larsen, T. J., 2007. Integrated dynamic analysis of floating offshore wind turbines, 2007 European Wind Energy Conference and Exhibition, Milan, Italy.
Yu, Q. and Chen, X., 2012. Floating Wind Turbines, Final Report for BSEE TA&R Project No. 669, Bureau of Safety and Environmental Enforcement (BSEE), U.S. Department of the Interior, Washington, D.C.
Zhang, S. R. and Huang, H., 2010. Structural dynamic analysis of offshore wind turbine with tension leg platferm, Acta Energiae Solaris Sinica, 31(9): 1198–1203. (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was financially supported by the National Natural Science Foundation of China (Grant No. 51239007).
Rights and permissions
About this article
Cite this article
Hu, Zq., Liu, Y. & Wang, J. An integrated structural strength analysis method for Spar type floating wind turbine. China Ocean Eng 30, 217–230 (2016). https://doi.org/10.1007/s13344-016-0013-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13344-016-0013-y