Low-frequency vibration measurement by a dual-frequency DBR fiber laser
- 356 Downloads
A dual-frequency distributed Bragg reflector (DBR) fiber laser based sensor is demonstrated for low-frequency vibration measurement through the Doppler effect. The response of the proposed sensor is quite linear and is much higher than that of a conventional accelerometer. The proposed sensor can work down to 1 Hz with high sensitivity. Therefore, the proposed sensor is very efficient in low-frequency vibration measurement.
KeywordsFiber laser sensors Doppler effect vibration measurement
This work was supported by the National Natural Science Foundation of China (Grant Nos. 11474133 and 61235005), Natural Science Foundation of Guangdong Province of China (No. 2014A030310419), and the Guangzhou Key Collaborative Innovation Foundation of China (No. 2016201604030084).
- D. Jiang and H. Wei, “Review of applications for fiber Bragg grating sensor,” Journal of Optoelectronics Laser, 2002, 13(4): 420–430.Google Scholar
- Y. Weng, X. Qiao, Z. Feng, M. Hu, J. Zhang, and Y. Yang, “Compact FBG diaphragm accelerometer based on L-shaped rigid cantilever beam,” Chinese Optics Letters, 2011, 9(10): 22–25.Google Scholar
- J. H. Zhou, G. Chen, and Q. S. Cao, “Design of ultrasonic system for vibration measurement based on Doppler effect,” Instrument Technique and Sensor, 2015, 1(7): 61–62.Google Scholar
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/ licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.