Abstract
This paper implements a meshless technique based on the multiquadric radial basis function to investigate the flexural response of thin to moderately thick laminated plates resting on elastic foundations and subjected to various types of transverse loads with simply supported boundary conditions. The laminated plates are modelled via the equivalent single-layered Higher-Order Shear Deformation Theory plate theory with five unknown variables. This study applied the energy principle to determine the governing differential equations of the elastically supported laminated plate and discretized with stable the multiquadric radial basis function. The program is compiled on the MATLAB platform, and numerous comparative studies are carried out to show the reliability and correctness of the suggested meshless numerical model. The flexural behaviour of the laminated plate is investigated using parametric studies to determine the impacts of the span-to-thickness ratio, two variable elastic foundations, aspect ratio, orthotropy ratio, and number of layers on flexural behaviours of the considered plates are presented.
Similar content being viewed by others
References
Dash, P., & Singh, B. N. (2010). Geometrically nonlinear bending analysis of laminated composite plate. Communications in Nonlinear Science and Numerical Simulation, 15, 3170–3181. https://doi.org/10.1016/j.cnsns.2009.11.017
Ferreira, A. J. M. (2003). A formulation of the multiquadric radial basis function method for the analysis of laminated composite plates. Composite Structures, 59, 385–392. https://doi.org/10.1016/S0263-8223(02)00239-8
Ferreira, A. J. M., Carrera, E., Cinefra, M., & Roque, C. M. C. (2011). Analysis of laminated doubly-curved shells by a layerwise theory and radial basis functions collocation, accounting for through-the-thickness deformations. Computational Mechanics, 48, 13–25. https://doi.org/10.1007/s00466-011-0579-4
Ferreira, A. J. M., Carrera, E., Cinefra, M., Viola, E., Tornabene, F., Fantuzzi, N., & Zenkour, A. M. (2014). Analysis of thick isotropic and cross-ply laminated plates by generalized differential quadrature method and a unified formulation. Composites Part B: Engineering, 58, 544–552. https://doi.org/10.1016/j.compositesb.2013.10.088
Ferreira, A. J. M., Castro, L. M. S., & Bertoluzza, S. (2009). A high order collocation method for the static and vibration analysis of composite plates using a first-order theory. Composite Structures, 89, 424–432. https://doi.org/10.1016/j.compstruct.2008.09.006
Ferreira, A. J. M., Roque, C. M. C., & Martins, P. A. L. S. (2003). Analysis of composite plates using higher-order shear deformation theory and a finite point formulation based on the multiquadric radial basis function method. Composites Part B: Engineering, 34, 627–636. https://doi.org/10.1016/S1359-8368(03)00083-0
Ferreira, A. J. M., Roque, C. M. C., & Martins, P. A. L. S. (2004). Radial basis functions and higher-order shear deformation theories in the analysis of laminated composite beams and plates. Composite Structures, Twelfth International Conference on Composite Structures, 66, 287–293. https://doi.org/10.1016/j.compstruct.2004.04.050
Hardy, R. L., & Nelson, S. A. (1986). A multiquadric-biharmonic representation and approximation of disturbing potential. Geophysical Research Letters, 13, 18–21. https://doi.org/10.1029/GL013i001p00018
Huang, J., Nguyen-Thanh, N., Gao, J., Fan, Z., & Zhou, K. (2022). Static, free vibration, and buckling analyses of laminated composite plates via an isogeometric meshfree collocation approach. Composite Structures, 285, 115011. https://doi.org/10.1016/j.compstruct.2021.115011
Kansa, E. J. (1990). Multiquadrics—A scattered data approximation scheme with applications to computational fluid-dynamics—I surface approximations and partial derivative estimates. Computers & Mathematics with Applications, 19, 127–145. https://doi.org/10.1016/0898-1221(90)90270-T
Khan, A., & Saxena, K. K. (2022). A review on enhancement of mechanical properties of fiber reinforcement polymer composite under different loading rates. Materials Today: Proceedings, International Conference on Applied Research and Engineering, 2021(56), 2316–2322. https://doi.org/10.1016/j.matpr.2021.12.009
Kumar, R., Lal, A., Singh, B. N., & Singh, J. (2020). Non-linear analysis of porous elastically supported FGM plate under various loading. Composite Structures, 233, 111721. https://doi.org/10.1016/j.compstruct.2019.111721
Kumar, R., Singh, B. N., Singh, J., & Singh, J. (2022b). Meshfree approach for flexure analysis of bidirectional porous FG plate subjected to I, L, and T types of transverse loading. Aerospace Science and Technology, 129, 107824. https://doi.org/10.1016/j.ast.2022.107824
Kumar, R., Singh, B. N., & Singh, J. (2022a). Geometrically nonlinear analysis for flexure response of FGM plate under patch load. Mechanics Based Design of Structures and Machines. https://doi.org/10.1080/15397734.2022.2058015
Kumar, R., Lal, A., Singh, B. N., & Singh, J. (2019a). Meshfree approach on buckling and free vibration analysis of porous FGM plate with proposed IHHSDT resting on the foundation. Curved and Layered Structures, 6, 192–211. https://doi.org/10.1515/cls-2019-0017
Kumar, R., Lal, A., Singh, B. N., & Singh, J. (2019b). New transverse shear deformation theory for bending analysis of FGM plate under patch load. Composite Structures, 208, 91–100. https://doi.org/10.1016/j.compstruct.2018.10.014
Kumar, R., & Singh, J. (2018). Assessment of higher order transverse shear deformation theories for modeling and buckling analysis of FGM plates using RBF based meshless approach. Multidiscipline Modeling in Materials and Structures. https://doi.org/10.1108/MMMS-07-2017-0069
Lashkari, M. J., & Rahmani, O. (2016). Bending analysis of sandwich plates with composite face sheets and compliance functionally graded syntactic foam core. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230, 3606–3630. https://doi.org/10.1177/0954406215616417
Liaw, B.-D., & Little, R. W. (1967). Theory of bending multi-layer sandwich plates. AIAA Journal, 5, 301–304. https://doi.org/10.2514/3.3956
Mahi, A., Adda Bedia, E. A., & Tounsi, A. (2015). A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates. Applied Mathematical Modelling, 39, 2489–2508. https://doi.org/10.1016/j.apm.2014.10.045
Mantari, J. L., Oktem, A. S., & Guedes Soares, C. (2012a). A new trigonometric shear deformation theory for isotropic, laminated composite and sandwich plates. International Journal of Solids and Structures, 49, 43–53. https://doi.org/10.1016/j.ijsolstr.2011.09.008
Mantari, J. L., Oktem, A. S., & Guedes Soares, C. (2012b). A new higher order shear deformation theory for sandwich and composite laminated plates. Composites Part B: Engineering, 43, 1489–1499. https://doi.org/10.1016/j.compositesb.2011.07.017
Pagano, N. J. (1969). Exact solutions for composite laminates in cylindrical bending. Journal of Composite Materials, 3, 398–411. https://doi.org/10.1177/002199836900300304
Pagano, N. J. (1970). Exact solutions for rectangular bidirectional composites and sandwich plates. Journal of Composite Materials, 4, 20–34. https://doi.org/10.1177/002199837000400102
Park, M., & Choi, D.-H. (2018). A four-variable first-order shear deformation theory considering the variation of in-plane rotation of functionally graded plates. International Journal of Steel Structures, 18, 1265–1283. https://doi.org/10.1007/s13296-018-0107-x
Pavan, G. S., & Nanjunda Rao, K. S. (2017). Bending analysis of laminated composite plates using isogeometric collocation method. Composite Structures, 176, 715–728. https://doi.org/10.1016/j.compstruct.2017.04.073
Qatu, M. S., & Algothani, A. (1994). Bending analysis of laminated plates and shells by different methods. Computers & Structures, 52, 529–539. https://doi.org/10.1016/0045-7949(94)90238-0
Ray, M. C. (2021). Three-dimensional exact elasticity solutions for antisymmetric angle-ply laminated composite plates. International Journal of Mechanics and Materials in Design, 17, 767–782. https://doi.org/10.1007/s10999-021-09536-y
Reddy, B. S., Reddy, A. R., Kumar, J. S., & Reddy, K. V. K. (2012). Bending analysis of laminated composite plates using finite element method. International Journal of Engineering, Science and Technology, 4, 177–190. https://doi.org/10.4314/ijest.v4i2.14
Reddy, J. N., & Liu, C. F. (1985). A higher-order shear deformation theory of laminated elastic shells. International Journal of Engineering Science, 23, 319–330. https://doi.org/10.1016/0020-7225(85)90051-5
Rodrigues, D. E. S., Belinha, J., Dinis, L. M. J. S., & Natal Jorge, R. M. (2020). The numerical analysis of symmetric cross-ply laminates using the natural neighbour radial point interpolation method and high-order shear deformation theories. Engineering Structures, 225, 111247. https://doi.org/10.1016/j.engstruct.2020.111247
Rodrigues, D. E. S., Belinha, J., Dinis, L. M. J. S., & Natal Jorge, R. M. (2021). A meshless study of antisymmetric angle-ply laminates using high-order shear deformation theories. Composite Structures, 255, 112795. https://doi.org/10.1016/j.compstruct.2020.112795
Saood, A., Khan, A. H., Equbal, M. I., Saxena, K. K., Prakash, C., Vatin, N. I., & Dixit, S. (2022). Influence of fiber angle on steady-state response of laminated composite rectangular plates. Materials, 15, 5559. https://doi.org/10.3390/ma15165559
Sarangan, S., & Singh, B. N. (2017). Evaluation of free vibration and bending analysis of laminated composite and sandwich plates using non-polynomial zigzag models: C0 Finite element formulation. Aerospace Science and Technology, 68, 496–508. https://doi.org/10.1016/j.ast.2017.06.001
Sarra, S. A. (2006). Integrated multiquadric radial basis function approximation methods. Computers & Mathematics with Applications, Radial Basis Functions and Related Multivariate Meshfree Approximation Methods: Theory and Applications, 51, 1283–1296. https://doi.org/10.1016/j.camwa.2006.04.014
Savithri, S., & Varadan, T. K. (1990). Accurate bending analysis of laminated orthotropic plates. AIAA Journal, 28, 1842–1844. https://doi.org/10.2514/3.10489
Setoodeh, A. R., & Azizi, A. (2015). Bending and free vibration analyses of rectangular laminated composite plates resting on elastic foundation using a refined shear deformation theory. Iranian Journal of Materials Forming, 2, 1–13. https://doi.org/10.22099/ijmf.2015.3236
Singh, S., Singh, J., & Shula, K. K. (2014). Buckling of laminated composite and sandwich plates using radial basis function collocations. International Journal of Structural Stability and Dynamics, 15, 1540002. https://doi.org/10.1142/S0219455415400027
Solanki, M. K., Kumar, R., & Singh, J. (2017). Flexure analysis of laminated plates using multiquadratic RBF based meshfree method. International Journal of Computational Methods. https://doi.org/10.1142/S0219876218500494
Srinivas, S., & Rao, A. K. (1970). Bending, vibration and buckling of simply supported thick orthotropic rectangular plates and laminates. International Journal of Solids and Structures, 6, 1463–1481. https://doi.org/10.1016/0020-7683(70)90076-4
Urthaler, Y., & Reddy, J. N. (2008). a mixed finite element for the nonlinear bending analysis of laminated composite plates based on FSDT. Mechanics of Advanced Materials and Structures, 15, 335–354. https://doi.org/10.1080/15376490802045671
Xiao, J. R., Gilhooley, D. F., Batra, R. C., Gillespie, J. W., & McCarthy, M. A. (2008). Analysis of thick composite laminates using a higher-order shear and normal deformable plate theory (HOSNDPT) and a meshless method. Composites Part B: Engineering, 39, 414–427. https://doi.org/10.1016/j.compositesb.2006.12.009
Yuan, W., Bao, Z., Yu, N., Zhu, S., & Wu, L. (2017). Nonlinear bending of box section beams of finite length under uniformly distributed loading. International Journal of Steel Structures, 17, 491–499. https://doi.org/10.1007/s13296-017-6009-5
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kumar, C., Kumar, R., Sharma, H.K. et al. Simulation and Modelling for Bending Analysis of Elastically Supported Laminated Plates Under Concentrated Load: A Meshless Approach. Int J Steel Struct 23, 1091–1104 (2023). https://doi.org/10.1007/s13296-023-00752-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13296-023-00752-0