Abstract
In the present study, the experimental investigation of the repair of the Al 2024 T3 plate with edge and center crack by Carbon fiber-reinforced polymer (CFRP) patch under tensile loading is carried out. The present work is carried out in two parts. In the first part, the fracture analysis of isotropic and CFRP plates with edge crack under tensile loading is carried out. Where the comparative study of Al plate and CFRP [Unidirectional (UD) and Bidirectional (BD)] is presented for the selection of proper patching material. In the second part, the repair of the cracked isotropic plate by BD CFRP patch is presented. In this present work, it is observed that CFRP (BD) patch is suitable for the crack repair of the Al plate. The crack growth does not take place from the initially generated crack in the repaired plate under tensile loading and the maximum peak load in the edge and center cracked repaired plate is increased by 26% and 16% respectively as compared to the unrepaired plate.
Similar content being viewed by others
Abbreviations
- \(u_{i}\) :
-
Conventional degrees of freedom (DOF)
- \(a\) :
-
Extra DOF for crack face
- \(b_{i}^{\alpha }\) :
-
Extra DOF for crack face
- \(\Omega\) :
-
Area of arbitrary area
- \(\Gamma\) :
-
Outer boundary
- \(m\) :
-
Nodes of FEM
- \(m_{C}\) :
-
Crack face enrichment
- \(m_{t}\) :
-
Crack tip enrichment
- \(H_{f}\) :
-
Heaviside function
- \(\Phi_{f}\) :
-
Branch enrichment function
- \(K_{E}\) :
-
Global stiffness matrix
- \(f_{E}\) :
-
Global force vector
- \({\mathbb{C}}\) :
-
Constitutive matrix
- \(\nu\) :
-
Poisson’s ratio
- \(K_{I}\) :
-
First mode SIF
- \(K_{II}\) :
-
Second mode SIF
- \(J\) :
-
J-Integral
References
Aglan, H. A., Gan, Y. X., Wang, Q. Y., & Kehoe, M. (2002). Design guidelines for composite patches bonded to cracked aluminum substrates. Journal of Adhesion Science and Technology, 16, 197–211. https://doi.org/10.1163/156856102317293704
Albedah, A., Bouiadjra, B. B., Mhamdia, R., & Benyahia, F. (2011). Comparison between double and single sided bonded composite repair with circular shape. Materials & Design, 32(2), 996–1000. https://doi.org/10.1016/j.matdes.2010.08.022
Albedah, A., Khan, S. M., Benyahia, F., & Bouiadjra, B. B. (2015). Experimental analysis of the fatigue life of repaired cracked plate in aluminum alloy 7075 with bonded composite patch. Engineering Fracture Mechanics, 145, 210–220. https://doi.org/10.1016/j.engfracmech.2015.04.008
Baker, A., Gunnion, A. J., & Wang, J. (2015). On the certification of bonded repairs to primary composite aircraft components. The Journal of Adhesion, 91, 4–38. https://doi.org/10.1080/00218464.2014.883315
Belhouari, M., Bouiadjra, B. B., Megueni, A., & Kaddouri, K. (2004). Comparison of double and single bonded repairs to symmetric composite structures: A numerical analysis. Composite Structure, 65(1), 47–53. https://doi.org/10.1016/j.compstruct.2003.10.005
Bouiadjra, B. B., Belhouari, M., & Serier, B. (2002). Computation of the stress intensity factors for repaired cracks with bonded composite patch in mode I and mixed mode. Composite Structures, 56, 401–406. https://doi.org/10.1016/S0263-8223(02)00023-5
Bouiadjra, B. B., Benyahia, F., Albedah, A., Bouiadjra, B. A. B., & Khan, S. M. (2015). Comparison between composite and metallic patches for repairing aircraft structures of aluminum alloy 7075 T6. International Journal of Fatigue, 80, 128–135. https://doi.org/10.1016/j.ijfatigue.2015.05.018
Bouiadjra, B. B., Fekirini, H., Serier, B., & Benguediab, M. (2007). SIF for inclined cracks repaired with double and single composite patch. Mechanics of Advanced Materials and Structures, 14, 303–308. https://doi.org/10.1080/15376490600845454
Errouane, H., Sereir, Z., & Chateauneuf, A. (2014). Numerical model for optimal design of composite patch repair of cracked aluminum plates under tension. International Journal of Adhesion and Adhesives, 49, 64–72. https://doi.org/10.1016/j.ijadhadh.2013.12.004
Fekih, S. M., Albedah, A., Benyahia, F., Belhouari, M., Bouiadjra, B. B., & Miloudi, A. (2012). Optimisation of the sizes of bonded composite repair in aircraft structures. Material & Design, 41, 171–176. https://doi.org/10.1016/j.matdes.2012.04.025
Khalili, S. M. R., Shariyat, M., & Mokhtari, M. (2014). Static tensile and transient dynamic response of cracked aluminum plate repaired with composite patch: Numerical study. Applied Composite Materials, 21, 441–455. https://doi.org/10.1007/s10443-014-9390-7
Khalili, S. M. R., Shiravi, M., & Nooramin, A. S. (2010). Mechanical behavior of notched plate repaired with polymer composite and smart patches-experimental study. The Journal of Reinforced Plastics and Composites, 29, 3021–3037. https://doi.org/10.1177/0731684410363179
Kim, J. H., & Paulino, G. H. (2002). Finite element evaluation of mixed-mode stress intensity factors in functionally graded materials. International Journal for Numerical Methods Engineering, 53(8), 1903–1935. https://doi.org/10.1002/nme.364
Kumar, A. M., & Hakeem, S. A. (2000). Optimum design of symmetric composite patch repair to centre cracked metallic sheet. Composite Structures, 49(3), 285–292. https://doi.org/10.1016/S0263-8223(00)00005-2
Liu, J., Qin, M., Zhao, Q., Chen, L., Liu, P., & Gao, J. (2017). Fatigue performances of the cracked aluminum-alloy pipe repaired with a shaped CFRP patch. Thin-Walled Structures, 111, 155–164. https://doi.org/10.1016/j.tws.2016.11.008
Makwana, A. H., & Shaikh, A. A. (2019). The role of patch hybridization on tensile response of cracked panel repaired with hybrid composite patch: Experimental and numerical investigation. The Journal of Adhesion. https://doi.org/10.1080/00218464.2019.1629911
Makwana, A. H., Shaikh, A. A., Bakare, A. K., & Chitturi, S. (2018). Investigation of patch hybridization effect on the composite patch repair of a cracked aluminum plate: A pragmatic approach. Mechanics of Advanced Materials and Structures. https://doi.org/10.1080/15376494.2018.1432818
Makwana, A. H., Vyas, N., & Barot, R. S. (2021). Numerical investigation of composite patch repair of inclined cracked panel using XFEM. Materials Today: Proceedings, 45, 5128–5133. https://doi.org/10.1016/j.matpr.2021.01.643
Maleki, H. N., & Chakherlou, T. N. (2017). Investigation of the effect of bonded composite patch on the mixed-mode fracture strength and stress intensity factors for an edge crack in aluminum alloy 2024–T3 plates. The Journal of Reinforced Plastics and Composites, 36, 1074–1091. https://doi.org/10.1177/0731684417702001
Meran, A. P., & Samanci, A. (2017). Analysis of various composite patches effect on mechanical properties of notched Al-Mg plate. Steel and Composite Structures, 25, 685–692.
Moises, J. M., & Mariel, A. P. (2021). Fatigue life prediction of aluminum using artificial neural network. Engineering Letters, 29(2), 704.
Muc, A. (2020). Fuzzy approach in modeling static and fatigue strength of composite materials and structures. Neurocomputing, 393(14), 156–164. https://doi.org/10.1016/j.neucom.2018.12.094
Rachid, M., Serier, B., Bouiadjra, B. B., & Belhouari, M. (2012). Numerical analysis of the patch shape effects on the performances of bonded composite repair in aircraft structures. Composite Part b: Engineering, 43, 391–397. https://doi.org/10.1016/j.compositesb.2011.08.047
Ramji, M., & Srilakshmi, R. (2012). Design of composite patch reinforcement applied to mixed-mode cracked panel using finite element analysis. The Journal of Reinforced Plastics and Composites, 31, 585–595. https://doi.org/10.1177/0731684412440601
Ramji, M., Srilakshmi, R., & Prakash, M. B. (2013). Towards optimization of patch shape on the performance of bonded composite repair using FEM. Composites Part b: Engineering, 45(1), 710–720. https://doi.org/10.1016/j.compositesb.2012.07.049
Reis, J. M. L., Costa, A. R., & Da Costa Mattos, H. S. (2022). Repair of damage in pipes using bonded GFRP patches. Composite Structures, 296, 115875. https://doi.org/10.1016/j.compstruct.2022.115875
Sadeghinia, M., Khalili, S. M. R., & Ghadjar, R. (2008). Impact behavior of cracked plate repaired with composite and FML patches. Advanced Materials Research, 47, 612–616. https://doi.org/10.4028/www.scientific.net/AMR.47-50.612
Shinde, P. S., Kumar, P., Singh, K. K., Tripathi, V. K., Aradhi, S., & Sarkar, P. K. (2017). The role of yield stress on cracked thin panels of aluminum alloys repaired with a FRP patch. The Journal of Adhesion, 93, 412–429. https://doi.org/10.1080/00218464.2015.1078243
Shinde, P. S., Kumar, P., Singh, K. K., Tripathi, V. K., & Sarkar, P. K. (2015). Experimental study of CFRP patches bonded on a cracked aluminum alloy panel. Composite Interfaces, 22, 233–248. https://doi.org/10.1080/15685543.2015.1012426
Srilakshmi, R., Ramji, M., & Chinthapenta, V. (2015). Fatigue crack growth study of CFRP patch repaired Al 2014–T6 panel having an inclined center crack using FEA and DIC. Engineering Fracture Mechanics, 134, 182–201. https://doi.org/10.1016/j.engfracmech.2014.12.012
Talebi, B., & Abedian, A. (2016). Numerical modeling of adhesively bonded composite patch repair of cracked aluminum panels with concept of CZM and XFEM. Proceedings of the Institution of Mechanical Engineers, Part g: Journal of Aerospace Engineering, 230(8), 1448–1466. https://doi.org/10.1177/0954410015612120
Tsouvalis, N. G., Mirisiotis, L. S., & Dimou, D. N. (2009). Experimental and numerical study of the fatigue behaviour of composite patch reinforced cracked steel plates. International Journal of Fatigue, 31, 1613–1627. https://doi.org/10.1016/j.ijfatigue.2009.04.006
Yala, A. A., & Megueni, A. (2009). Optimisation of composite patches repairs with the design of experiments method. Material & Design, 30(1), 200–205. https://doi.org/10.1016/j.matdes.2008.04.049
Funding
The author(s) received no financial support for the research, authorship and publication of this article.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The author(s) declared no potential conflicts of interest with respect to the research, authorship and publication of this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Mishra, K., Lal, A. & Sutaria, B.M. Experimental Investigation of Repair of Plate with Edge and Center Crack by Surface Bounded Composite Patch. Int J Steel Struct 23, 534–547 (2023). https://doi.org/10.1007/s13296-023-00710-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13296-023-00710-w