Abstract
Shear walls are used in towers as lateral loading resistance. Composite steel shear wall (CSSW) because of high stiffness and deformability are widely used. This wall made of a thin steel plate with reinforced a concrete layer, which is attached to one or both sides of the steel plate. This system is similar to stiffened steel plate shear wall. The present experimental and numerical studies were focused on the effects of opening used as windows or doors in buildings on the CSSW behavior. Experimental studies results of one and three-story CSSWs with the scale of 1:3 are reported. In addition, the effects of opening size and location are insignificant on the composite steel shear walls behavior. Results showed that opening decrease CSSW strength. Opening at the sides and corners further reduces the resistance than Opening at the center.
Similar content being viewed by others
References
ABAQUS/Standard theory manual, Version 6.13-1 (2013). Hibbitt, Karlsson, Sorenson, Inc, (HKS).
AISC, ANSI/AISC 341-05 (2005). Seismic provisions for structural steel buildings, Chicago (IL): American Institute of Steel Construction.
Arabzadeh A. and M. Soltani and Ayazi A. (2011). “Experimental investigation of composite shear walls under shear loadings.” Thin-Walled Structures Journal, Vol. 49, pp. 842–854.
ASCE, SEI/ASCE 7-05 (2005). Minimum design loads for buildings and other structures. Virginia (USA): American Society of Civil Engineers.
Astaneh-Asl A. (1998-2000). “Seismic studies of innovative and traditional composite shear walls.” Research project in-progress, Dept of Civil and Env Engineering: Univ. of California, Berkeley.
Astaneh-Asl A. (2000-2001). “Cyclic tests of steel shear walls.” Research project, Berkeley: Dept of Civil and Env Engineering, Univ of California.
ATC-24 (1992). Guidelines for Seismic testing of components of steel structures. Report 24, Applied Technology Council. Redwood City: CA.
Driver R.G. and Kulak G.L. and Kennedy D.J.L. and Elwi A.E. (1998). “Cyclic tests of four-story steel plate shear wall.” Journal of Structural Engineering, ASCE, 124(2), pp. 112–120.
Kulak G.L. (1991). “Unstiffened steel plate shears walls.” In: Narayanan R, Roberts TM, editors. Structures subjected to repeated loading-stability and strength. London: Elsevier Applied Science Publications; p. 237–276.
McKinley B. and Boswell L.F. (2002). “Behaviour of double skin composite construction.” Journal of Constructional Steel Research, 58(10), pp. 1347–59.
Park H.G. and Kwack J.H. and Joen S.W. and Kim W.K. and Choi I.R. (2007). “Framed Steel Plate Wall Behavior under Cyclic Lateral Loading.” Journal of Structural Engineering, ASCE, pp. 378–388.
Rahai A. and Hatami F. (2009). “Evaluation of composite shear wall behavior under cyclic loadings.” J. Constr. Steel Res., Vol. 65, pp. 1528–1537.
Sabouri-Ghomi S. and Sajjadi S.R. (2012). “Experimental and theoretical studies of steel shear walls with and without stiffeners”, Journal of Constructional Steel Research, Volume 75, pp. 152–159.
Sabouri-Ghomi S. and Ahouri E. and Sajjadi S.R. and Alavi M. and Roufegarinejad A. and Bradford, (2012). “Stiffness and strength degradation of steel shear walls having an arbitrarily-located opening.” Journal of Constructional Steel Research, Volume 79, pp. 91–100.
Timler P.A. and Kulak G.L. (1983). “Experimental study of steel plate shear walls.” Structural engineering report no114. Edmonton (AB): Department of Civil Engineering, University of Alberta.
Tong X.T. and Hajar J.F. and Schultz A.E. and Shield C.K. (2005). “Cyclic behavior of steel frame structures with composite reinforced concrete infill walls and partially restrained connections.” J. Constr. Steel Res., Vol. 61, pp. 531–552.
Vian D. and Bruneau M. (2004). “Testing of special LYS steel plate shear wall.” 13th World Conference on Earthquake Eng; Paper No.978.
Zhao Q. and Astaneh-Asl A. (2004). “Cyclic Behavior of Traditional and Innovative Composite Shear Walls.” J Struct Eng, ASCE.
Zhen G. and Yingshu Y. (2015). “Experimental study of steel plate composite shear wall units under cyclic load.” International Journal of Steel Structures, Vol. 15, pp. 515–525.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Arabzadeh, A., Kazemi Nia Korrani, H.R. Numerical and experimental investigation of composite steel shear wall with opening. Int J Steel Struct 17, 1379–1389 (2017). https://doi.org/10.1007/s13296-017-1209-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13296-017-1209-6