Skip to main content
Log in

Assessment of vibration serviceability for steel cable-stayed bridges using GNSS data

  • Published:
International Journal of Steel Structures Aims and scope Submit manuscript

Abstract

Assessment of deflection and vibration serviceability is important for flexible structures such as long-span bridges. The purpose of deflection criteria in bridge design is to ensure user-comfort and structural safety by evaluating hazardous vibrations. The vibration of the bridge is mainly due to vehicular or wind loading. The objective of this study is to evaluate or assess the deflection and vibration serviceability by vehicular loading of steel cable stayed bridge based on experimental and theoretical studies. The test bridge is a cable-stayed bridge with a steel box girder and a main span length of 240 m. The bridge maintenance authority measures the deflection of the bridge using the GNSS (Global Navigation Satellite System) in real-time. Accelerometers are also installed for the test, and measurements were performed for both a test truck and under normal traffic conditions. Measured data are compared with the theoretical values and evaluated against the deflection and/or vibration design criteria and other relevant research results. The results of this study can be used to provide a basis for deflection criterion in long-span bridges.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • American Society of Civil Engineering. (1958). “Deflection Limitation of a Bridge”. Journal of the Structural Division, 84, (Rep. No. ST3).

    Google Scholar 

  • Barker, M.G., Staebler, J., Barth, K.E., (2011). “Serviceability limits and economical steel bridge design.” FHWA-HIF-11-044

    Google Scholar 

  • CSA (1990). CSA. S6-88 and Commentary. Design of Highway Bridges, Canadian Standards Association, Rexdale, Ontario, Canada.

    Google Scholar 

  • Gethin, W.R., Emily, C., Xiaolin, M., Alan, D. (2004), High Frequency Deflection Monitoring of Bridges by GPS, Journal of Global Positioning Systems, Vol. 3, No. 1–2, pp. 226–231.

    Google Scholar 

  • Goldman, D. E. (1948) “A Review of Subjective Responses to Vibratory Motion of the Human Body in the Frequency Range 1 to 70 Cycle per second.” Naval Medical research Institute, National Naval Medical Center, Bethesda, MD.

    Google Scholar 

  • Hwang, E.S., Kwon, Y.C., Park, K.J. and Kim, D.Y. (2014), “Serviceability Assessment of Deflection for Long Span Suspension Bridge”, 2014 KIBSE Annual Meeting and Conference, pp. 129–130

    Google Scholar 

  • Midas Information Technology Co., Ltd. (2016), “Midas User Support System”, Retrieved January 31, 2016, from http://kor.midasuser.com/civil/index.asp

    Google Scholar 

  • Ministry of Land, Transport and Maritime Affairs (2010). Korean Bridge Design Code

    Google Scholar 

  • Ministry of Land, Infrastructure and Transport (2015). Korean Bridge Design Code, Limit State Design

    Google Scholar 

  • OHBDC (1983). Design of Highway Bridges, Ontario Highway Bridge Department, Ontario, Canada.

    Google Scholar 

  • Ongjin-gun, Incheon, Korea (2011), In-depth inspection report of Yeongheung Bridge and Seonjae Bridge

    Google Scholar 

  • Park, J.C., Gil, H.B., Kang, S.G., Lim, C.W. (2010), Dynamic Characteristic of a Cable-Stayed Bridge Using Global Navigation Satellite System, KSCE, Vol. 30, No. 4A, pp. 375–382.

    Google Scholar 

  • Postlethwaite, F. (1944) “Human Susceptibility to Vibration”, Engineering, Vol. 157 pp. 61–63

    Google Scholar 

  • Reiher, H. and Meister, F. J. (1931) StatEmpfindlichkeit des Menschen gegen Erschütterungen.teForschung auf dem Gebiet des Ingenieurwesens A, Volume 2, Issue 11, pp. 381–386

    Google Scholar 

  • Saadeghvaziri, M.A., Darjani, S., Saigal, S. and Khan, A. (2012) “Design for deflection control vs. use of specified span to depth ratio limitations”, FHWA-NJ-2012-009, Final Report.

    Google Scholar 

  • Septentrio N. V. (2016), “Rover & Base Receivers”, Retrieved January 31, 2016, from http://www.septentrio. com/products/gnss-receivers/rover-base-receivers

    Google Scholar 

  • Wikimedia Foundation, Inc. (2016), “Global Positioning System”, Retrieved January 31, 2016, from https://en.wikipedia.org/wiki/Global_Positioning_System

    Google Scholar 

  • Wright, D.T. and Green, R.(1964). Highway Bridge Vibration. Part II: Report No. 5 Ontario Test Program. Ontario Department of Highways and Queen’s University Kingston, Onrario

    Google Scholar 

  • Wright, R.N. and Walker, W.H. (1971) “Criteria for the deflection of steel bridges”, American Iron and Steel Institute, Bulletin No. 19, November 1971

    Google Scholar 

  • Wong, K.Y., Man, K.L., and Chan, W.Y. (2001), Monitoring hong kong’s bridges: real-time kinematics spans the gap, GPS World, Vol. 12, No. 7, pp. 10–18.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Eui-Seung Hwang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Park, KJ., Hwang, ES. Assessment of vibration serviceability for steel cable-stayed bridges using GNSS data. Int J Steel Struct 16, 1251–1262 (2016). https://doi.org/10.1007/s13296-016-0068-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13296-016-0068-x

Keywords

Navigation