Abstract
Chemically cross-linked gel polymer electrolytes containing ionic liquid were prepared and their electrochemical properties were investigated. Lithium polymer batteries composed of a lithium anode and a LiNi1/3Co1/3 Mn1/3O2 cathode were assembled using an in situ cross-linked gel polymer electrolyte and their cycling performances were evaluated. The optimum content of the cross-linking agent to ensure both high initial discharge capacity and good capacity retention of the lithium polymer battery was found to be about 4 wt%.
Similar content being viewed by others
References
J. M. Tarascon and M. Armand, Nature, 414, 359 (2001).
N. Byrne, P. C. Howlett, D. R. MacFarlane, and M. Forsyth, Adv. Mater., 17, 2497 (2005).
M. Ishikawa, T. Sugimoto, M. Kikuta, E. Ishiko, and M. Kono, J. Power Sources, 162, 658 (2006).
H. Nakagawa, Y. Fujino, S. Kozono, Y. Katayama, T. Nukuda, H. Sakaebe, H. Matsumoto, and K. Tatsumi, J. Power Sources, 174, 1021 (2007).
M. Galinski, A. Lewandowski, and I. Stepniak, Electrochim. Acta, 51, 5567 (2006).
A. Lewandowski and A. Swiderska-Mocek, J. Power Sources, 194, 601 (2009).
M. Armand, F. Endres, D. R. MacFarlane, H. Ohno, and B. Scrosati, Nat. Mater., 9, 621 (2009).
A. Lewandowski and M. Galinski, J. Phys. Chem. Solids, 64, 281 (2004).
C. G. Yeom, Y. I. Kim, S. H. Kim, Y. M. Lee, J. H. Kim, D. S. Kim, S. H. Lee, and J. M. Ko, Macromol. Res., 19, 313 (2011).
A. Fernicola, F. Croce, B. Scrosati, T. Watanabe, and H. Ohno, J. Power Sources, 174, 342 (2007).
J. H. Shin and E. J. Cairns, J. Power Sources, 177, 537 (2008).
P. Reale, A. Fernicola, and B. Scrosati, J. Power Sources, 194, 182 (2009).
L. Larush, V. Borgel, E. Markevich, O. Haik, E. Zinigrad, and D. Aurbach, J. Power Sources, 189, 217 (2009).
V. Borgel, E. Markevich, D. Aurbach, G. Semrau, and M. Schmidt, J. Power Sources, 189, 331 (2009).
J. Hassoun, A. Fernicola, M. A. Navarra, S. Panero, and B. Scrosati, J. Power Sources, 195, 574 (2010).
R. Mogi, M. Inaba, S. K. Jeong, Y. Iriyama, T. Abe, and Z. Ogumi, J. Electrochem. Soc., 149, A1578 (2002).
T. Sato, T. Maruo, S. Marukane, and K. Takagi, J. Power Sources, 138, 253 (2004).
M. Holzapfel, C. Jost, A. Prodi-Schwab, F. Krumeich, A. Wursig, H. Buqa, and P. Novak, Carbon, 43, 1488 (2005).
I. A. Profatilova, N. S. Choi, S. W. Roh, and S. S. Kim, J. Power Sources, 192, 636 (2009).
N. S. Choi, Y. Lee, S. S. Kim, S. C. Shin, and Y. M. Kang, J. Power Sources, 195, 2368 (2010).
Y. S. Yun, J. H. Kim, S. Y. Lee, E. G. Shim, and D. W. Kim, J. Power Sources, 196, 6750 (2011).
J. Y. Song, Y. Y. Wang, and C. C. Wan, J. Power Sources, 77, 183 (1999).
M. Stephan, Eur. Polym. J, 42, 21 (2006).
S. Ahmad, Ionics, 15, 309 (2009).
P. Zhang, L. Li, D. He, Y. Wu, and M. Shimizu, Acta Polym. Sinica, 2, 125 (2011).
T. Ohzuku and Y. Makimura, Chem. Lett., 642 (2001).
Z. Lu, D. D. MacNeil, and J. R. Dahn, Electrochem. Solid State Lett., 4, A200 (2001).
M. H. Lee, Y. J. Kang, S. T. Myung, and Y. K. Sun, Electrochim. Acta, 50, 939 (2004).
W. Lu, Z. Chen, H. Joachin, J. Prakash, J. Liu, and K. Amine, J. Power Sources, 163, 1074 (2007).
Z. D. Huang, X. M. Liu, S. W. Oh, B. Zhang, P. C. Ma, and J. K. Kim, J. Mater. Chem., 21, 10777 (2011).
H. Nakagawa, Y. Fujino, S. Kozono, Y. Katayama, T. Nukuda, H. Sakaebe, H. Matsumoto, and K. Tatsumi, J. Power Sources, 174, 1021 (2007).
J. H. Kim, S. W. Song, H. V. Hoang, C. H. Doh, and D. W. Kim, Bull. Korean Chem. Soc., 32, 105 (2011).
S. Randstrom, M. Montanino, G. B. Appetecchi, C. Lagergren, A. Moreno, and S. Passerini, Electrochim. Acta, 53, 6397 (2008).
G. T. Kim, G. B. Appetecchi, M. Carewska, M. Joost, A. Balducci, M. Winter, and S. Passerini, J. Power Sources, 195, 6130 (2010).
Y. Baba, S. Okada, and J. Yamaki, Solid State Ionics, 148, 311 (2002).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yun, Y.S., Choi, JA. & Kim, DW. Lithium polymer batteries assembled with in situ cross-linked gel polymer electrolytes containing ionic liquid. Macromol. Res. 21, 49–54 (2013). https://doi.org/10.1007/s13233-013-1001-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13233-013-1001-1