Abstract
This paper presents the development of a constant and wireless controlled DC/AC based boost differential converter with a sensor-less changeover system. The system was computationally designed, modeled, and simulated using MatLab/Simulink software prior to its practical implementation. The designed and simulated system was implemented using solar panels, two directional DC-DC converter current linked battery banks, and a single-staged H-bridge DC/AC converter. The unique properties of the developed system include: one stage input voltage conversion and magnification without the need of a power transformer, wireless turn-on/off scheme, weightless, sensor-less and relay-less automatic voltage changeover, and a simplified feedback system. The Matlab/Simulink simulation results show that the system achieves a pure sine output voltage and current waveform, total harmonic distortion (THD) of 1.22%, efficiency of 94.45%, moderately fast transient response of 1.5 kW. The simulated results were validated with practical experimentation of the system. The definite target areas of utilization of the developed system are: in hospital equipment and remote rural areas.
Similar content being viewed by others
Data availability and material
All data generated or analyzed during this study are included in this published article.
References
Aamit M, Kim H (2011) Non-isolated single phase uninterruptible power supply system. In: 8th International conference on power electronic ECCE Asia, pp. 2282–2289.
Aher KS, Thosar AG (2016) Modeling and simulation of five phase induction motor using matlab/simulink. Int J Eng Res Appl 6(5):1–8
Ahmed NA, Iwai T, Omori H, Lee HW, Nakaoka M (2006) A novel auxiliary edge-resonant snubber-assisted soft switching pwm high frequency inverter with series capacitor compensated resonant load for consumer induction heating resonant load for consumer induction heating. J Power Electron 6(2):95–103
Akhter R, Hoque, A (2006) Analysis of PWM Boost inverter for solar home application. In: Internal conference Enformatika, pp. 212–216.
Amac AE, Emadi A (2018) Uninterrupted power supplies. In: The electrical engineering handbook, Six Volume Set, Third Edition, pp. 9–73.
Anteneh TM, Salau AO, Agajie TF, Hailu EA (2019) design and implementation of a direct torque controller for a three phase induction motor based on dsp. Int J Appl Eng Res 14(22):4181–4187
ArathyM SP (2014) Design and implementation of a pv powered five level inverter using multilevel differential boost converter. Int J Adv Res Electr Electron Instrum Eng 3(6):10316–10320
Cacere RO, Barb I (1999) A boost DC-AC converter, analysis, design, and experimentation. IEEE Trans Power Electron 14(1):134–141
Chang Y, Wu M (2010) High-conversion-ratio switched-capacitor boost dc-ac inverter using sinusoidal pwm control. In: Proceeding of multi-international conference engineers and computer scientist, pp. 1–6.
Eya C, Crescent O, Ukwejeh JM (2019) Solar-powered five level output voltage of dc-to-ac converter using simplified capacitor voltage controlled scheme (SCVCS). In: 2019 IEEE PES/IAS PowerAfrica, Abuja, Nigeria, 1-6. DOI: https://doi.org/10.1109/PowerAfrica46609.2019.9078670
Eya CU, Salau AO, Oti SE (2021) High performance dc-to-ac converter using snubberless h-bridge power switches and an improved dc-to-dc converter. Int J Circuits, Syst Signal Process 15:315–333. https://doi.org/10.46300/9106.2021.15.36
Das PPM, Moschopoulos G (2013) Analysis and design of a new AC–DC single-stage full-bridge PWM converter with two controllers. IEEE Trans Ind Electron 60:4930–4946
Dineshkumar T, Thirumoorthi P, Rajalakshmi S (2019) Design of boost inverter for solar power. Int J Eng Adv Technol (IJEAT) 8:82249–8958
Dineshkumar T, Premalatha K, Nandhini JJ (2017) Modelling and analysis of single stage single phase boost inverter. Int J Pure Appl Math 117(8):89–93. https://doi.org/10.12732/ijpam.v117i8.18
Dioke GC, Eya CU (2019) Modeling and simulation of five-phase induction motor fed with pulse width modulated five-phase multilevel voltage source inverter topologies. J Adv Electr Devices 4(2):6–22
Hart DW (2011) Power Electronics: McGraw-Hill, a business unit of The McGraw-Hill Companies, Inc., 1221 Avenue of the Americas, New York, NY 10020. McGraw-Hill Companies.
Huang SJ (2006) A novel design of line—interactive uninterruptible power supplies without load current sensors. IEEE Trans Power Electron 21(1):202–210
Islam A, Khosla A (2018) Single-phase uninterrupted power supply with boost converter. Int J Eng Sci Invent (IJESI) 7(12):29–34
Komurcugil H (2012) Rotating-sliding-line-based sliding-mode control for single-phase UPS inverters. IEEE Trans Ind Electron 59:3719–3726
Koushiki B, Ghaisari J (2009) A voltage reference design for three-phase Boost inverter. EUROCON, St.-Petersburg, 650–654. https://doi.org/10.1109/EURCON.2009.5167702
Mezaroba M, Giacomini PG, de Sousa AH, de Souza Margue LC (2006) Digital Sliding mode controlled Three-phase Boost inverter implemented in TMS320F2812. Conferencia Internacional de Aplicacoes Industrial, Bahia-Brazil, pp 6–13
Miller JL (1991) Principles of Infrared Technology: A practical guide to the state of the art. International Thomson Publishing Berkshire House, 168–173 High Holborn, London WCIV 7AA, England
Nnodim O (2019) Nigeria’s power sector losses growing at N474 billion annually. Punch Newspaper.
Odeh CI (2011) Three-Phase Boost DC-AC Converter using sliding mode controller. Niger J Technol 30(1):20–29
Salau AO, Ejidokun AO, Adewara O, Ajala OS, Aliyu E, Yesufu TK (2017) A GSM-based SMS power notification system for network operation centers. Int J Sci Eng Res (IJSER) 8(7):830–837
Salau AO, Eya CU, Onyebuchi OC (2020) Nonzero staircase modulation scheme for switching dc-dc boost converter. J Control Sci Eng 8347462:1–15. https://doi.org/10.1155/2020/8347462
Subsingha W (2016) Design and analysis three phase three level diode-clamped grid connected inverter. Energy Procedia 89:130–136
Tajdić M, Despotović V, Kon J (2021) Design and implementation of an uninterruptible power supply for command and control center of the surveillance, alert & warning system. Int Symp Infoteh-Jahorina (INFOTEH). https://doi.org/10.1109/INFOTEH51037.2021.9400686
Vázquez N, Villegas-Saucillo J, Hernández C, Rodríguez E, Arau J (2008) Two-stage uninterruptible power supply with high power factor. IEEE Trans Industr Electron 55(8):2957–2962
Zhu GR, Tan SC, Chen Y, Chi KT (2012) Mitigation of low-frequency current ripple in fuel-cell inverter systems through waveform control. IEEE Trans Power Electron 28(2):779–792
Zhu Y, Hu W, Wang Z, Ma X (2021) Single-phase on-line uninterruptible power supply with low load regulation. In: IEEE International conference on power electronics, computer applications (ICPECA). DOI: https://doi.org/10.1109/ICPECA51329.2021.9362585
Funding
The authors declare no funding for this research.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Consent for publication
Authors declare that we all are in agreement to this submission and for the paper to be published if accepted.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Eya, C.U., Salau, A.O. & Oti, S.E. Constant and wireless controlled DC-to-AC based boost differential converter with a sensor-less changeover system. Int J Syst Assur Eng Manag 13, 1321–1340 (2022). https://doi.org/10.1007/s13198-021-01451-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13198-021-01451-x