Skip to main content

Advertisement

SpringerLink
Log in

Design and optimization of prefabricated building system based on BIM technology

  • Original article
  • Published:
International Journal of System Assurance Engineering and Management Aims and scope Submit manuscript

Abstract

The popularization and maturity of BIM technology provide a new method and platform for the realization of collaborative design of prefabricated buildings. At present, BIM applications in prefabricated buildings are mostly stays in the stage of construction and production. Prefabricated buildings are the best choice for the transformation and upgrading of construction industry because of their high efficiency and small impact on the environment. Prefabricated building is not only a building form, but also a complex system engineering, which needs to use the methods and ideas of system engineering to solve practical problems. In order to promote the application of BIM in prefabricated building design, this paper compares BIM collaborative design with traditional design methods. Based on the requirements of BIM technology IDM, a conceptual model of PCP collaborative design is established to determine the accuracy of BIM model in different design stages. Parametric design tools dynamo and structural precast for revit were used to split prefabricated components, configure steel bars and analyze the structure of prefabricated buildings. The results show that the effectiveness of the building collaborative design method based on BIM is verified through an example.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  • Cheng JC, Chen W, Chen K, Wang Q (2020) Data-driven predictive maintenance planning framework for MEP components based on BIM and IoT using machine learning algorithms. Automat Constr 112:103087

    Article  Google Scholar 

  • Chen L, Luo H (2014) A BIM-based construction quality management model and its applications. Autom Constr 46:64–73

    Article  Google Scholar 

  • Cui Y, Li S, Liu C, Sun N (2020) Creation and diversified applications of plane module libraries for prefabricated houses based on BIM. Sustainability 12(2):453. https://doi.org/10.3390/su12020453

    Article  Google Scholar 

  • Deng L, Zhong M, Liao L, Peng L, Lai S (2019) Research on safety management application of dangerous sources in engineering construction based on BIM technology. Adv Civil Eng 2019:1–10. https://doi.org/10.1155/2019/7450426

    Article  Google Scholar 

  • He R, Li M, Gan VJ, Ma J (2021) BIM-enabled computerized design and digital fabrication of industrialized buildings: a case study. J Clean Prod 278:123505

    Article  Google Scholar 

  • Hongyan W, Zihong Z (2020) Discussion on prefabricated concrete structure design method under BIM technology. E3S Web Conf 198:03011

    Article  Google Scholar 

  • Jairath K, Singh N, Jagota V, Shabaz M (2021) Compact ultrawide band metamaterial-inspired split ring resonator structure loaded band notched antenna. Math Probl Eng. https://doi.org/10.1155/2021/5174455

    Article  Google Scholar 

  • Jianping Z, Ding L, Jiarui L, Gangwen Y (2012) Application of BIM in engineering construction. Constr Technol 16:10–17

    Google Scholar 

  • Lau SY, Chen T, Zhang J, Xue X, Khoo YS (2019) A new approach for the project process: prefabricated building technology integrated with photovoltaics based on the bim system. IOP Conf Ser Earth Environ Sci 294:012050

    Article  Google Scholar 

  • Lee D, Lee SH, Masoud N, Krishnan MS, Li VC (2021) Integrated digital twin and blockchain framework to support accountable information sharing in construction projects. Autom Constr 127:103688

    Article  Google Scholar 

  • Liu B (2021) Application research on the integration of civil engineering and computer-aided building system based on the development of BIM. J Phys Conf Ser 1881(4):042013

    Article  Google Scholar 

  • Liu Y, Zhang S, Wang Z, Qiu Z, He S (2019) Collaborative design of prefabricated building architecture and structure based on pkpm-bim platform. E3S Web Conf 136(16):01048

    Google Scholar 

  • Fang L, Jianfeng Z, Yechao J (2020) Study on energy consumption calculation model of prefabricated building envelope system based on BIM. In: 5th International Conference on Smart Grid and Electrical Automation (ICSGEA). https://doi.org/10.1109/icsgea51094.2020.00017

  • Liu Z, Gu X, Dong Q, Tu S, Li S (2021) 3D visualization of airport pavement quality based on BIM and WebGL integration. J Transp Eng Part B Pavements 147(3):04021024

    Article  Google Scholar 

  • Li J, Hou L, Wang X, Wang J, Guo J, Zhang S, Jiao Y (2014) A project-based quantification of BIM benefits. Int J Adv Rob Syst 11(8):123

    Article  Google Scholar 

  • Lou J, Xu J, Wang K (2017) Study on construction quality control of urban complex project based on BIM. Procedia Eng 174:668–676

    Article  Google Scholar 

  • Munirathinam R, Ponnan S, Chakraborty C, Umathurai S (2021) Improved performance on seizure detection in an automated electroencephalogram signal under evolution by extracting entropy feature. Multimedia Tools Appl. https://doi.org/10.1007/s11042-021-11069-7

    Article  Google Scholar 

  • Ning X, Guangbin W (2019) Study on resource management for prefabricated concrete building based on BIM technology. MATEC Web Conf 275:05002. https://doi.org/10.1051/matecconf/201927505002

    Article  Google Scholar 

  • Rong N (2019) Research on optimization of prefabricated construction building process based on bim technology. IOP Conf Ser Earth Environ Sci 300:022057

    Article  Google Scholar 

  • Sarkar A, Khan MZ, Singh MM, Noorwali A, Chakraborty C, Pani SK (2021) Artificial neural synchronization using nature inspired whale optimization. IEEE Access 9:16435–16447

    Article  Google Scholar 

  • Song Z, Shi G, Wang J, Wei H, Wang T, Zhou G (2019) Research on management and application of tunnel engineering based on BIM technology. J Civ Eng Manag 25(8):785–797

    Article  Google Scholar 

  • Tang F, Ma T, Guan Y, Zhang Z (2020) Parametric modeling and structure verification of asphalt pavement based on BIM-ABAQUS. Autom Constr 111:103066

    Article  Google Scholar 

  • Wang G (2019) Design and optimization of prefabricated component system based on BIM technology. J Phys Conf Ser 1345(6):062054

    Article  Google Scholar 

  • Wang Z, Wang L (2015) Green building materials management based on BIM technology. ICCREM 2015. https://doi.org/10.1061/9780784479377.020

  • Wang M, Wang CC, Sepasgozar S, Zlatanova S (2020a) A systematic review of digital technology adoption in off-site construction: current status and future direction towards industry 4.0. Buildings 10(11):204

    Article  Google Scholar 

  • Wang M, Altaf MS, Al-Hussein M, Ma Y (2020b) Framework for an IoT-based shop floor material management system for panelized homebuilding. Int J Constr Manag 20(2):130–145

    Google Scholar 

  • Wei H, Zheng S, Zhao L, Huang R (2017) BIM-based method calculation of auxiliary materials required in housing construction. Autom Constr 78:62–82

    Article  Google Scholar 

  • Wu X (2021) Wireless management system of prefabricated construction materials based on BIM technology. EURASIP J Wirel Commun Netw 2021(1):1–19

    Article  Google Scholar 

  • Xue F, Lu W (2020) A semantic differential transaction approach to minimizing information redundancy for BIM and blockchain integration. Autom Constr 118:103270

    Article  Google Scholar 

  • Xu J, Li BK, Luo SM (2018) Practice and exploration on teaching reform of engineering project management course in universities based on BIM simulation technology. EURASIA J Math Sci Technol Educ 14(5):1827–1835

    Google Scholar 

  • Yang J (2020) The structural design method of prefabricated buildings based on bim technology. IOP Conf Ser Earth Environ Sci 598:012029

    Article  Google Scholar 

  • Yao Q, Shabaz M, Lohani TK, Wasim BM, Panesar GS, Singh RK (2021) 3D modelling and visualization for Vision-based Vibration Signal Processing and Measurement. J Intell Syst 30(1):541–553

    Article  Google Scholar 

  • Yin YL, Qian K (2013) Construction project cost management based on BIM technology. Appl Mech Mater 357:2147–2152

    Article  Google Scholar 

  • Yuan Y, Yuan J (2011) The theory and framework of integration design of building consumption efficiency based on BIM. Procedia Eng 15:5323–5327

    Article  Google Scholar 

  • Yuan Z, Sun C, Wang Y (2018) Design for manufacture and assembly-oriented parametric design of prefabricated buildings. Autom Constr 88:13–22

    Article  Google Scholar 

  • Zhang Z, Tang Y (2020) Research on prefabricated building based on bim technology in computer environment. J Phys Conf Ser 1648(4):042032

    Article  Google Scholar 

  • Zhou JX, Shen GQ, Yoon SH, Jin X (2021) Customization of on-site assembly services by integrating the internet of things and BIM technologies in modular integrated construction. Autom Constr 126:103663

    Article  Google Scholar 

Download references

Acknowledgements

Application of BIM technology in prefabricated building, 2020 project of the combination of industry, education and research, Guangzhou Education Bureau. Project No.: 202032803.

Funding

The present work is self funded.

Author information

Authors and Affiliations

  1. Guangzhou City Polytechnic, Guangzhou, Guangdong Province, China

    Yanwu Xiao

  2. Electronics and Communication Engineering Department, National Institute of Technology, Hamirpur, India

    Jyoti Bhola

Authors
  1. Yanwu Xiao
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jyoti Bhola
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Jyoti Bhola.

Ethics declarations

Conflict of interest

The author(s) declare(s) that there is no conflict of interest regarding the publication of this paper.

Human participants and/or animals

This research do not involve Human or Animal participants for any kind of testing on them.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Xiao, Y., Bhola, J. Design and optimization of prefabricated building system based on BIM technology. Int J Syst Assur Eng Manag 13 (Suppl 1), 111–120 (2022). https://doi.org/10.1007/s13198-021-01288-4

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13198-021-01288-4

Keywords

Search

Navigation