Abstract
Along with the development of digital manufacturing level, to eliminate digital measurement error becomes very important in the production and manufacturing process. In order to effectively eliminate measuring datum error, a novel algorithm for digital measurement error rectification is proposed. According to the principle of graphics transformation, a nonlinear objective function with constraints is developed. Through nonlinear programming, the optimal parameters are achieved in the feasible region, which are the theoretical adjustment basis for parts. Finally, an example using the rectification algorithm is presented in this paper and reveals that the rectification algorithm reduces the comprehensive deviation of measured data and has an impact on the production and measurement for mechanical parts.
Similar content being viewed by others
References
Ferreira PM, Liu CR (1993) A method for estimating and compensating quasistatic errors of machine tools. J Eng Ind 115:149–159
Gaska A et al (2015) Analysis of changes in coordinate measuring machines accuracy made by different nodes density in geometrical errors correction matrix. Measurement 68:155–163
Jakstas A et al (2014) Thermal error analysis in precision length measurements. Measurement 51:133–146
Killmaier T, Ramesh Babu A (2003) Genetic approach for automatic detection of form deviations of geometrical features for effective measurement strategy. Precis Eng 27:319–326
Li L (2008) Research on method of shape error separation and evaluation for Large-scale cylinder. Dissertation, He fei University of Technology, pp 1–8 (in Chinese)
Li ZR, Fang ZM (2012) Analysis and modeling on the error synthesis for CNC machine tools. Manuf Technol Mach Tool 8:69–72 (in Chinese)
Liu WL et al (2007) Calibration and error compensation of portable coordinate measuring arm. Chin J Sci Instrum 28:81–84 (in Chinese)
vin Lit FL et al (1993) Minimization of deviation of gear real tooth surface determined by coordinate measurements. J Mech Des ASME 115:995–1001
Wang P, Zhang DH (2012) Machining error control by integrating multivariate statistical process control and stream of variations methodology. Chin J Aeronaut 25:937–947
Wang J et al (2003) Measurement and compensation of deviations of real tooth surface of spiral bevel gear. Chin J Aeronaut 16:182–186
Zhang T et al (2013) Temperature variable optimization for precision machine tool thermal error compensation on optimal threshold. Chin J Mech Eng 26:158–165
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Han, Zr., Liang, Wx., Jia, Z. et al. Research on digital measurement error and rectification algorithm for mechanical parts. Int J Syst Assur Eng Manag 8, 747–761 (2017). https://doi.org/10.1007/s13198-017-0595-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13198-017-0595-7