Abstract
This paper describes briefly the use of Ni-YSZ (yttrium oxide doped with 8 % in mol of zirconium oxide) for methanol oxidation in 1.0 mol L−1 KOH solution. The Ni-YSZ has a great performance for methanol oxidation reaching a current density around 160 mA cm−2. This value is at least four times greater than in platinum electrode. The high performance of Ni-YSZ compared with Pt electrode can also be viewed in measures electrochemical impedance spectroscopy. The Ni-YSZ shows the charge transfer resistance around 1.80 Ohm cm2. Thus, in our material, the effect of NiO(OH) barrier is drastically reduced. The chronoamperograms for methanol oxidation at potential equal to 1.0 V shows that the charge density for Ni-YSZ electrode is about four times larger than in Pt electrode.
Similar content being viewed by others
References
H.L. Tang, S.L. Wang, M.R. Pan, S.P. Jiang, Y.Z. Ruan, Electrochim. Acta. 52, 3714 (2007)
S.H. Liu, W.Y. Yu, C.H. Chen, A.Y. Lo, B.J. Hwang, S.H. Chien, S.B. Liu, Chem. Mater. 20, 1622 (2008)
E.M. Garcia, H.A. Taroco, T. Matencio, Z.R. Domingues, F.A.J. Santos, G.J.B.M. Freitas, J. Appl. Electrochem. 41, 1373–1379 (2011)
E.M. Garcia, H.A. Tarôco, T. Matencio, R.Z. Domingues, F.A.J. Santos, Int. J. Hydrogen Energy 37, 6400–6406 (2012)
C.H. Fujimoto, M.A. Hickner, C.J. Cornelius, D.A. Loy, Macromolecules 38, 5010 (2005)
C.W. Xu, H. Wang, P.K. Shen, S.P. Jiang, Adv. Mater. 19, 4256 (2007)
J.P. Liu, J.Q. Ye, C.W. Xu, S.P. Jiang, Y.X. Tong, J. Power Sources 177, 67 (2008)
C.W. Xu, Y.L. Liu, D.S. Yuan, Int. J. Electrochem. Sci. 2, 674 (2007)
Z.D. Wei, L.L. Li, Y.H. Luo, C. Yan, C.X. Sun, G.Z. Yin, P.K. Shen, J. Phys. Chem. B. 110, 26055 (2006)
S.L. Chen, M. Schell, Electrochim. Acta 44, 4773 (1999)
J.Y. Sun, J.S. Huang, Y.X. Cao, X.G. Zhang, Int. J. Electrochem. Sci. 2, 64 (2007)
A.A. Elshafei, J. Electroanal. Chem. 471, 89–95 (1999)
M.S. Kim, T.S. Hwang, K.B. Kim, J. Electrochem. Soc. 144, 151–157 (1997)
M.A.A. Rahim, R.M.A. Hameed, M.W. Khalil, J. Power Sources 134, 160–169 (2004)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Garcia, E.M., Tarôco, H.A., Matencio, T. et al. Preparation of High Porous Ni-YSZ Cermets Electrodes and Their Application for Methanol Oxidation. Electrocatalysis 4, 71–75 (2013). https://doi.org/10.1007/s12678-012-0121-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12678-012-0121-2