Abstract
The potential of a novel cascade membrane methanol reactor (CMMR) in the presence of catalyst deactivation has been investigated by Rahimpour and Bayat [Int J Energy Res 34(15):1356–1371, 2010]. In the present paper, this novel configuration is optimized using genetic algorithm strategy, dynamically. In the first approach, optimum inlet molar flow rate, the inlet pressure of the tube and shell side for both reactors, the temperatures of feed (cooling gas) and cooling saturated water have been obtained within their practical ranges. In the second approach, a stepwise trajectory has been followed in order to determine the optimal profiles for saturated water and gas temperatures in three steps during operation. The objective of each optimization case is to maximize the methanol production rate. Here, genetic algorithms have been used as powerful methods for optimization of complex problems. The optimization results represent 19.67 and 25.63 % enhancement in the methanol production for first and second optimization approaches, respectively.
Similar content being viewed by others
Abbreviations
- \(A_c \) :
-
Cross section area of each tube, m\(^{2}\)
- A\(_{shell}\) :
-
Cross section area of shell, m\(^{2}\)
- \(a\) :
-
Activity of catalyst, [\(-\)]
- \(a_v \) :
-
Specific surface area of catalyst pellet, m\(^{2}\) m\(^{-3}\)
- \(c_{Pg}\) :
-
Specific heat of the gas at constant pressure, J mol\(^{-1}\) k\(^{-1}\)
- \(c_{p,h}\) :
-
Specific heat of the hydrogen at constant pressure, J mol\(^{-1}\) k\(^{-1}\)
- \(c_{Ps}\) :
-
Specific heat of the catalyst at constant pressure, J mol\(^{-1}\) k\(^{-1}\)
- \(d_p \) :
-
Particle diameter, m
- \(F^t\) :
-
Flow rate of gas in tube side, mol s\(^{-1}\)
- \(F^{sh}\) :
-
Total molar flow in shell side, mol s\(^{-1}\)
- \(k_{gi}\) :
-
Mass transfer coefficient for component i, m s\(^{-1}\)
- \(P_H ^t\) :
-
Hydrogen partial pressure in tube side, bar
- \(P_H ^{sh}\) :
-
Hydrogen partial pressure in tube side shell side, bar
- T:
-
Bulk gas phase temperature, K
- T\(_{shell}\) :
-
Saturated temperature of boiling water at operating pressure, K
- T\(_{tube}\) :
-
Tube side temperature, K
- t :
-
Time, s
- U\(_{shell}\) :
-
Overall heat transfer coefficient between coolant and process streams, W m\(^{-2}\) K\(^{-1}\)
- \(y_{is}^s \) :
-
Mole fraction of component i in the solid phase in shell, mol mol\(^{-1}\)
- \(y_i^t \) :
-
Mole fraction of component i in the fluid phase in tube side, mol mol\(^{-1}\)
- \(y_{is}^t \) :
-
Mole fraction of component i in the solid phase in tube side, mol mol\(^{-1}\)
- \(z\) :
-
Axial reactor coordinate, m
- \(\alpha _H \) :
-
Hydrogen permeation rate constant, mol m\(^{-1}\) s\(^{-1}\) Pa\(^{-0.5}\)
- \(\varepsilon _{B}\) :
-
Void fraction of catalytic bed, [\(-\)]
- \(\varepsilon _{s}\) :
-
Void fraction of catalyst, [\(-\)]
- \(\rho _{B}\) :
-
Density of catalytic bed, kg m\(^{-3}\)
- \(\rho _{s}\) :
-
Density of catalyst, kg m\(^{-3}\)
- \(\eta \) :
-
Catalyst effectiveness factor, [\(-\)]
References
Lange, J.P.: Methanol synthesis: a short review of technology improvements. Catal. Today 64, 3–8 (2001)
Demirbas, A.: Biodiesel production from vegetable oils by supercritical methanol. J. Sci. Ind. Res. 64, 858–865 (2005)
Lovik, I., Hillestad, M., Hertzberg, T.: Long term dynamic optimization of a catalytic reactor system. Comp. Chem. Eng. 22, 707–710 (1998)
Rahimpour, M.R., Fathikalajahi, J., Jahanmiri, A.: Selective kinetic deactivation model for methanol synthesis from simultaneous reaction of CO\(_{2}\) and CO with H\(_{2}\) on a commercial copper/zinc oxide catalyst. Can. J. Chem. Eng. 76, 753–761 (1998)
Velardi, S.A., Barresi, A.A.: Methanol synthesis in a forced unsteady-state reactor network. Chem. Eng. Sci. 57, 2995–3004 (2002)
Rahimpour, M.R.: A two-stage catalyst bed concept for conversion of carbon dioxide into methanol. Fuel Process. Technol. 89, 556–566 (2008)
Rahimpour, M.R., Lotfinejad, M.: A comparison of co-current and counter-current modes of operation for a dual type industrial methanol reactor. Chem. Eng. Process. 47, 1819–830 (2008)
Rahimpour, M.R., Khosravanipour Mostafazadeh, A., Barmaki, M.M.: Application of hydrogen-permselective Pd-based membrane in an industrial single-type methanol reactor in the presence of catalyst deactivation. Fuel Process. Technol. 89(12), 1396–1408 (2008)
Rahimpour, M.R., Ghader, S.: Enhancement of CO conversion in a novel Pd-Ag membrane reactor for methanol synthesis. Chem. Eng. Process. 43, 1181–1188 (2004)
Rahimpour, M.R., Lotfinejad, M.: Enhancement of methanol production in a membrane dual-type reactor. Chem. Eng. Technol. 30, 1062–1076 (2007)
Rahimpour, M.R., Lotfinejad, M.: Co-current and counter-current configurations for a membrane dual type methanol reactor. Chem. Eng. Technol. 31, 38–57 (2008)
Rahimpour, M.R., Alizadehhesari, K.: Enhancement of carbon dioxide removal in a hydrogen-permselective methanol synthesis reactor. Int. J. Hydrogen Energy 34, 1349–1362 (2009)
Rahimpour, M.R., Bayat, M.: A novel cascade membrane reactor concept for methanol synthesis in the presence of long-term catalyst deactivation. Int. J. Energy Res. 34(15), 1356–1371 (2010)
Rahimpour, M.R., Bayat, M., Rahmani, F.: Enhancement of methanol production in a novel cascading fluidized-bed hydrogen permselective membrane methanol reactor. Chem. Eng. J. 157, 520–529 (2010)
Rahimpour, M.R., Bayat, M., Rahmani, F.: Dynamic simulation of a cascade fluidized-bed membrane reactor in the presence of long-term catalyst deactivation for methanol synthesis. Chem. Eng. Sci. 65, 4239–4249 (2010)
Askari, F., Rahimpour, M.R., Jahanmiri, A., Khosravanipour Mostafazadeh, A.: Dynamic simulation and optimization of a dual-type methanol reactor using genetic algorithms. Chem. Eng. Technol. 31, 513–524 (2008)
Rahimpour, M.R., Elekaei, H.: Dynamic optimization of membrane dual-type methanol reactor in the presence of catalyst deactivation using genetic algorithm. Fuel Process. Technol. 90, 279–291 (2009)
Goldberg, D.E.: Genetic Algorithms in Search, Optimization, and Machine Learning. Addison-Wesley, Boston (1989)
Deb, K.: Optimization for Engineering Design. Prentice-Hall of India Private Limited, New Delhi (1998)
Nunes, S.P., Peinemann, K.V.: Membrane Technology in the Chemical Industry. Wiley, Weinheim (2001)
Rahimpour, M.R., Elekaei, H.: Optimization of a novel combination of fixed and fluidized-bed hydrogen-permselective membrane reactors for Fischer-Tropsch synthesis in GTL technology. Chem. Eng. J. 152, 543–555 (2009)
Lin, Y.M., Rei, M.H.: Study on the hydrogen production from methanol steam reforming in supported palladium membrane reactor. Catal. Today 67, 77–84 (2001)
Rahimpour, M.R., Ghader, S.: Theoretical investigation of a Pd-membrane reactor for methanol synthesis. Chem. Eng. Technol. 26, 902–907 (2003)
Buxbaum, R.E., Kinney, A.B.: Hydrogentransport through tubular membranes of palladium-coated tantalum andniobium. Ind. Eng. Chem. Res. 35, 530–537 (1996)
Domestic industrial methanol reactor, Design manual (2007)
Perry, R.H., Green, D.W., Maloney, J.O.: Perry’s Chemical Engineers’ Handbook, 7th edn. McGraw-Hill, New York (1977)
Cussler, E.L.: Diffusion. Mass Transfer in Fluid Systems. Cambridge University Press, Cambridge (1984)
Wilke, C.R.: Estimation of liquid diffusion coefficients. Chem. Eng. Progress. 45, 218–224 (1949)
Reid, R.C., Sherwood, T.K., Prausnitz, J.: The Properties of Gases and Liquids, 3rd edn. McGraw-Hill, New York (1977)
Smith, J.M.: Chemical Engineering Kinetics. McGraw-Hill, New York (1980)
Holman, J.P.: Heat Transfer. McGraw-Hill, New York (1989)
Hanken L.: Optimization of Methanol Reactor. Master’s Thesis, the Norwegian University of, Science and Technology (1995)
Hara, S., Xu, W.C., Sakaki, K., Itoh, N.: Kinetics and hydrogen removal effect for methanol decomposition. Ind. Eng. Chem. Res. 38, 488–492 (1999)
Barbieri, G., Maio, F.P.D.: Simulation of the methane steam re-forming process in a catalytic Pd-membrane reactor. Ind. Eng. Chem. Res. 36, 2121–2127 (1997)
Shu, G.: Grandjean B.P.I., Kaliaguine S.: Methane steam reforming in symmetric Pd- and Pd-Ag/porous ss membrane reactor. Appl. Catal. 119, 305–325 (1994)
Goldberg, D.E.: Genetic Algorithms in Search, Optimization, and Machine Learning. Addison-Wesley, Reading (1989)
Michalewicz, Z.: Genetic algorithms + Data Structure = Evolution Program. Springer, New York (1996)
Aris, R.: The Optimal Design of Chemical Reactors. Academic Press, New York (1961)
Kordabadi, H., Jahanmiri, A.: Optimization of methanol synthesis reactor using genetic algorithms. Chem. Eng. J. 108, 249–255 (2005)
Skrzypek, J., Lachowska, M., Grzesik, M., Sloczynski, J., Nowak, P.: Thermodynamics and kinetics of low pressure methanol synthesis. Chem. Eng. J. 58, 101–108 (1995)
Graaf, G.H., Scholtens, H., Stamhuis, E.J., Beenackers, A.A.C.M.: Intra-particle diffusion limitations in low-pressure methanol synthesis. Chem. Eng. Sci. 45, 773–783 (1990)
Graaf, G.H., Sijtsema, P.J.J.M., Stamhuis, E.J., Joosten, G.E.H.: Chemical equilibrium in methanol synthesis. Chem. Eng. Sci. 41, 2883–2890 (1986)
Author information
Authors and Affiliations
Corresponding author
Appendices
Appendix A: Dusty gas model
It is said that commercial size CuO/ZnO/Al\(_{2}\)O\(_{3 }\)catalysts exhibit intra-particle diffusion limitations, so in the modeling of an industrial fixed-bed methanol synthesis process, internal mass transport limitation should be taken into account. Dusty gas model is widely used to describe intra-particle diffusion limitations in methanol synthesis over commercial CuO/ZnO/Al\(_{2}\)O\(_{3}\) catalysts.
When reactants diffuse into the pores to react and form products, bulk, Knudsen and surface diffusions may take place simultaneously, depending on the size of the pores, the molecules involved in the diffusing stream, the operating conditions and the geometry of the pores. In the dusty gas model which is based on Stefan–Maxwell equations, both diffusional and convective mass transport terms are considered, and this includes the description of pressure drop over the catalyst particle resulting from the stoichiometry of reaction and accompanying convective transport of molecules. The results of sensitivity analysis show that at low pressures (up to 10 bar), Knudsen diffusion is the most important diffusing term; while at high pressures (100 bar) bulk diffusion predominates.
In this model, it is assumed that pore walls consist of giant molecules (‘dust’) which are uniformly distributed in the space. These dust molecules are considered to be dummy, or pseudo species in the mixture.
The dusty gas flux relations can be offered as follows, with a small change in the notation as to avoid conflicting with other notations used in the model:
In the above equation, \(B_{0}\) is permeability of catalyst pellet, \(D_{i}^{Eff}\) is effective Knudsen diffusion coefficient and \(D_{ij}^{Eff}\) is effective binary diffusion coefficient which is presented by Eqs. 23 and 24 in the bellow respectively:
where, \(a_{p}\) is the mean pore radius.
The dusty gas flux relations (Eqs. 22–24) contain three parameters: the mean pore radius, a, the ration of porosity and tortuosity factors, \(\varepsilon _{s} / \tau \) and the permeability parameter, B\(_{0}\). Using Darcy’s law, combines the two parameters of permeability and the mean pore radius and gives a two-parameter model using the following correlation:
The reader should note that the flux relations could be rewritten for distinct components to form a set of ordinary differential equations, yielding expressions for \(\frac{dy{ }_i}{dr}\). Knowing the fact that summation of all components equals to1 (i.e., \(\sum _1^N {y_i } =1)\), \(N-1\) ordinary differential equations should be written for the flux relations.
To complete the mathematical modeling of dusty gas model, the material balances and the stoichiometric relations have to be added in order to be able to describe the multicomponent reaction–diffusion problem. Since we have used the detailed Graaf kinetics for the system of methanol synthesis process, which is based on three-independent reactions, three material balances are needed to be added to flux relations. For a spherical and isothermal particle, this yields:
where, \(F_{ii}, F_{ij}, w \) and \(\Omega _{k}\) are auxiliary parameters and \(v\) is the stoichiometric coefficient
The pressure drop in radial coordinate is given by:
The boundary conditions for the set of ordinary differential equations are given by:
The effectiveness factors for methanol and water would be obtained as the following correlations based on equation A.5 and the fact that methanol is produced via reactions (37) and (38), while water is produced via reactions (38) and (39).
where, superscript s means that the variable has been calculated at the surface of catalyst pellet.
Appendix B: Reaction kinetics
Basically, methanol is still produced by catalytic conversion of synthesis gas (CO\(_{2}\), CO, H\(_{2}\) and some inert components such as argon and nitrogen) on a large scale.
The methanol synthesis reaction is exothermic and the total moles reduce as the reaction proceeds. In the methanol synthesis, three overall reactions are possible: hydrogenation of carbon monoxide, hydrogenation of carbon dioxide and reverse water–gas shift reaction, which are as follows:
Reactions (37)–(39) are not independent so that one is a linear combination of the other ones. The temperature and pressure of reaction are 495–535 K and 5–8 MPa, respectively. In the current work, the rate of expressions have been selected from Graaf et al. [41]. The rate equations combined with the equilibrium rate constants [42] provide enough information about kinetics of methanol synthesis. The correspondent rate expressions due to the hydrogenation of CO, CO\(_{2}\) and the reversed water-gas shift reactions are:
The reaction rate constants, adsorption equilibrium constants and reaction equilibrium constants which occur in the formulation of kinetic expressions are tabulated in Tables 8, 9, and 10, respectively.
Rights and permissions
About this article
Cite this article
Bayat, M., Rahimpour, M.R. Dynamic optimal analysis of a novel cascade membrane methanol reactor by using genetic algorithm (GA) method. Energy Syst 4, 137–164 (2013). https://doi.org/10.1007/s12667-012-0070-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12667-012-0070-0