Abstract
This study aims to identify internal friction (IF) peaks and to understand IF sensitivity to thermomechanical treatments in an Al alloy. The used commercial Al–Mg–Si alloy (AA6060) is subjected to two different thermomechanical cycles. Obtained results demonstrate that thermomechanical treatments have a significant effect on IF behavior. IF curves reveals the appearance of two distinct peaks. The first P1 appears at a medium temperature (around 463 K) in all states. It is mainly due to dislocation motion controlled by dragging clouds composed of Mg or Mg–Si in the presence of metastable precipitates. The second PR appears at high temperature (643 K) in the deformed samples. It is attributed to a transition from high IF background to low IF background due to recrystallization process.
Similar content being viewed by others
References
Poddaeva O, and Fedosova A, Review. Energy Rep. 7 (2021) 299. https://doi.org/10.1016/j.egyr.2021.07.119
Fiocchi J, Biffi C A, Scaccabarozzi D, Saggin B, and Tuissi A, Adv. Eng. Mater. 22 (2020) 1900722. https://doi.org/10.1002/adem.201900722
Andersen S J, Marioara C D, Vissers R, Frøseth A, and Zandbergen H W, Mater. Sci. Eng. A 444 (2007) 157. https://doi.org/10.1016/j.msea.2006.08.084
Xie C Y, Schaller R, and Jaquerod C, Mater. Sci. Eng. A 252 (1998) 78. https://doi.org/10.1016/S0921-5093(98)00683-2
Schaller R, and Rivière A, Mater. Sci. Forum 366–368 (2001) 276. https://doi.org/10.4028/www.scientific.net/MSF.366-368.276
Schaller R, and Benoit W, J. Phys. Colloq. 44 (1983) 9. https://doi.org/10.1051/jphyscol:1983902
Carreño-Morelli E, Urreta S E, and Ghilarduccdei Salva A A, Phys. Status Solidi A 158 (1996) 449. https://doi.org/10.1002/pssa.2211580213
Xie C Y, Schaller R, and Jaquerod C, Scr. Mater. 39 (1998) 225. https://doi.org/10.1016/S1359-6462(98)00158-4
Xie C Y, Carreño-Morelli E, and Schaller R, Philos. Mag. A 81 (2001) 2149. https://doi.org/10.1080/01418610108217140
Williams K J, Acta Metall. 15 (1967) 393. https://doi.org/10.1016/0001-6160(67)90220-9
Szenes G, and Zsambok D, Phys. Status Solidi A 21 (1974) K105. https://doi.org/10.1002/pssa.2210210257
Zheng K, Liu S, and Tian D, Phys. Status Solidi A 116 (1989) 621. https://doi.org/10.1002/pssa.2211160220
Urreta S E, Ghilarduccdei Salva A A, and Louchet F, Phys. Status Solidi A 139 (1993) 345. https://doi.org/10.1002/pssa.2211390208
Schöck G, Acta Metall. 11 (1963) 617. https://doi.org/10.1016/0001-6160(63)90096-8
Pichler A, Weller M, and Arzt E, Acta Metall. Mater. 42 (1994) 3801. https://doi.org/10.1016/09567151(94)90445-6
Blanter M S, Golovin I S, Neuhäuser H, and Sinning H-R, Internal Friction in Metallic Materials, Springer, Berlin (2007). https://doi.org/10.1007/978-3-540-68758-0
Xie CY, Development of high damping aluminum alloys for light weight systems, Ph.D. Thesis, EPFL (Lausanne, Switzerland), 1999. https://doi.org/10.5075/epfl-thesis-1981
Belson J, Lemercier D, Moser P, and Vigier P, Phys Status Solidi A. 40 (1970) 647. https://doi.org/10.1002/pssb.19700400224
Laouar B, Hamana D, and Hayoune A, Mater. Sci. Technol. 39 (2023) 519. https://doi.org/10.1080/02670836.2022.2125202
Granato A, and Lücke K, J. Appl. Phys. 27 (1956) 583. https://doi.org/10.1063/1.1722436
Feng X, Sun Y, Wan S, Chen G, and He J, Materials 13 (2020) 5574. https://doi.org/10.3390/ma13235574
Ding L, He Y, Wen Z, Zhao P, Jia Z, and Liu Q, J. Alloys Compd. 647 (2015) 238. https://doi.org/10.1016/j.jallcom.2015.05.188
Golovin I S, Mikhaylovskaya A V, and Sinning H-R, J. Alloys Compd. 577 (2013) 622. https://doi.org/10.1016/j.jallcom.2013.06.138
Golovin I S, Bychkov A S, Medvedeva S V, Hu X S, and Zheng M Y, Phys. Met. Metallogr. 114 (2013) 327. https://doi.org/10.1134/S0031918X13020087
Mikhaylovskaya A V, Portnoy V K, Mochugovskiy A G, Zadorozhnyy M Y, Tabachkova N Y, and Golovin I S, Mater. Des. 109 (2016) 197. https://doi.org/10.1016/j.matdes.2016.07.010
Angella G, Bassani P, and Tuissi A, Mater. Trans. 45 (2004) 2282. https://doi.org/10.2320/matertrans.45.2282
Rao P N, and Jayaganthan R, Mater. Des. 39 (2012) 226. https://doi.org/10.1016/j.matdes.2012.02.010
Bin L I, Luo B H, He K J, and Fan W L, Trans. Nonferrous Met. Soc. China 26 (2016) 561. https://doi.org/10.1016/S1003-6326(16)64382-0
Zang Q H, Chen H M, Zhang J, Cho J H, Jin X Y, and Shi Y K, Mater. Res. Innovations 19 (2015) S102. https://doi.org/10.1179/1432891715Z.0000000001524
Wang J F, Li S, Wu Z S, Wang H B, Gao S Q, and Pan F S, J. Alloys Compd. 729 (2017) 545. https://doi.org/10.1016/j.jallcom.2017.09.193
Hang Y J, Ma N H, Wang H W, and Li X F, Mater. Des. 29 (2008) 706. https://doi.org/10.1016/j.matdes.2007.03.002
Acknowledgements
We acknowledge the Algerian Directorate General of Scientific Research and Technological Development for its financial support.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
No potential conflict of interest is reported by the authors.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Laouar, B., Hamana, D., Hayoune, A. et al. Analysis of the Impact of Thermomechanical Treatments on Internal Friction in AA6060 Alloy. Trans Indian Inst Met 76, 3079–3086 (2023). https://doi.org/10.1007/s12666-023-03098-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-023-03098-7