Abstract
The commercially pure Al matrix composites reinforced with micro-Ti (Ti) particles as well as micro-Al2O3 (MA) or nano-Al2O3 (NA) particles have been developed via powder metallurgy route. Detailed microstructural characterizations as well as evaluation of microhardness, wear and corrosion behaviour have been carried out. As a basis for comparison, the same has also been investigated for the Al composites reinforced with these particles alone (i.e., Ti, MA, NA). The hybrid composites (i.e., Al + Ti + MA and Al + Ti + NA) reinforced with two different types of particles (i.e., Ti + MA/NA) have been found to exhibit relatively better hardness response; higher wear resistance and inferior response to corrosion, as compared to the composites (Al + Ti, Al + MA and Al + NA) reinforced with these particle alone.
Similar content being viewed by others
References
Miller W S, and Humphreys F J, Scripta Metall Mater 25 (1991) 33.
Lloyd D J, Int Mater Rev 34 (1994) 1.
Arsenault R J, Wang L, and Feng C R, Acta Metall Mater 39 (1991) 47.
Pramila Bai B N, Ramashesh B S, and Surappa M K, Wear 157 (1992) 295.
Kwok J K M, and Lim S C, Compos Sci Technol 59 (1999) 55.
Stefanescu D M, ASM Handbook: Volume 15: Casting, ASM International, Metals Park (1988).
Fridlyander J N, Metal Matrix Composites, Chapman & Hall, London (1995), p 51.
Midling O T, and Grong O, Key Eng Mater 329 (1995) 104.
Everett R K, Metal Matrix Composites: Processing and Interfaces (R.J. Arsenault), Academic Press, San Diego (1991).
Akio K, Atsushi O, Toshiro K, and Hiroyuki T, J Japan Inst Light Metals 49 (1999) 149.
Thakur S K, and Gupta M, Compos Part A-Appl S 38 (2007) 1010.
Perez P, Garces G, and Adeva P, Compos Sci Technol 64 (2004) 145.
Hassan S F, and Gupta M, J Alloys Compd 345 (2002) 246.
Hassan S F, and Gupta M, Mater Res Bull 37 (2002) 377.
Hwang S, Nishimura C, and McCormick P G, Scripta Mater 44 (2001) 2457.
Lu L, Lai M O, Toh Y H, and Froyen L, Mater Sci Eng A 334 (2002) 163.
Hassan S F, and Gupta M, J Alloys Compd 335 (2002) 10.
Gurcan A B, and Baker T N, Wear 188 (1995) 185.
Song J I, and Han K S, Compos Struct 39 (1997) 309.
Wang Y Q, Afsar A M, Jang J H, Han K S, and Song J I, Wear 268 (2010) 863.
Wang Y Q, and Song J I, Wear 270 (2011) 499.
Maxwell Rejil C, Dinaharan I, Vijay S J, and Murugan N, Mat Sci Eng A-Struct 552 (2012) 336.
Umanath K, Palanikumar K, and Selvamani S T, Compos Part B-Eng 53 (2013) 159.
Show B K, Mondal D K, and Maity J, J Mater Eng Perform 23 (2014) 875.
Elango G, Raghunath B K, Palanikumar K, and Thamizhmaran K, J Compos Mater 48 (2014) 2227.
Karakulak E, Yamanoğlu R, Erten U, Zeren A, Zor S, and Zeren M, Mater Design 59 (2014) 33.
Fontana M G, Corrosion Engineering, Tata McGraw-Hill Education, New York (2005).
Song G L, and Atrens A, Adv Eng Mater 1 (1999) 11.
Mert F, Blawert C, Kainer K U, and Hort N, Corros Sci 65 (2012) 145.
Blawert C, Fechner D, Höche D, Heitmann V, Dietzel W, Kainer K U, Živanović P, Scharf C, Ditze A, Gröbner J, and Fetzer R S, Corros Sci 52 (2010) 2452.
Bohne Y, Seeger D M, Blawert C, Dietzel W, Mändl S, and Rauschenbach B, Surf Coat Technol 200 (2006) 6527.
Blawert C, Heitmann V, Dietzel W, Nykyforchyn H M, and Klapkiv M D, Surf Coat Technol 201 (2007) 8709.
Sajjadi S A, Parizi M T, Ezatpour H R, and Sedghi A, J Alloys Compd 511 (2012) 226.
Majumdar A, and Muddle B C, Mater Sci Eng A 169 (1993) 135.
Zener C, Elasticity and Anelasticity of Metals, University of Chicago Press, Chicago (1948).
Dash K, Chaira D, and Ray B C, Mater Res Bull 48 (2013) 2535.
Razavi-tousi S S, Yazdani-Rad R, and Manafi S A, Mater Sci Eng A 528 (2011) 1105.
Zhang Z, Tremblay R, and Dube D, Mater Sci Eng A 385 (2004) 286.
Ho K F, Gupta M, and Srivatsan T S, Mater Sci Eng A 369 (2004) 302.
Hassan S F, and Gupta M, Mater Sci Tech Ser 19 (2003) 253.
Nguyen QB, and Gupta M, Compos Sci Technol 68 (2008) 2185.
Suh N P, Wear 44 (1977) 1.
Sahin Y, Wear 223 (1998) 173.
Hosking F M, Portillo F F, Wunderlin R, and Mehrabian R, J Mater Sci 17 (1982) 477.
Rohatgi P K, Menezes P L, Mazzei T, and Lovell M R, Int J Aerosp Innov 3 (2011) 153.
Mondal A K, Kumar S, Blawert C, and Dahotre N B, Surf Coat Tech 202 (2008) 3187.
Tiwari S, Balasubramaniam R, and Gupta M, Corros Sci 49 (2007) 711.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mohapatra, S., Bankoti, A.K.S., Mondal, A.K. et al. Dry Sliding Wear and Corrosion Behaviour of Al-Based Hybrid Composites Reinforced with Micro-Tip and Micro/Nano-Al2O3p . Trans Indian Inst Met 69, 1155–1167 (2016). https://doi.org/10.1007/s12666-015-0669-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-015-0669-7