Abstract
The aim of this work is to study of various parameters related to the mechanical characteristics of materials, to explain the phenomena of fatigue and rupture of structures; and contribute to the study of these phenomena in a welded joint in order to develop a method of analysis, adapted to this type of junction. For a better comprehension of the process leading to the fatigue and rupture of the welded structures, we checked two approaches of fracture mechanics, a global approach (J, CTOD) and a local approach (Rice–Tracey model based on the growth rate of cavities R/R0) involved in the studies of harmfulness of the defects of the welded joints and the sensitivity of the structure to any change in the field of stress and strain at the crack tip.
Similar content being viewed by others
References
Bathias C, La fatigue des matériaux et des structures, (ed) Maloine S A, Paris (1980), p 163.
Bouchouicha B, Contribution à l’étude de la déchirure ductile et de la propagation des fissures en fatigue dans les joints soudés, Thèse de doctorat, Université djillali liabes-sba, Sid Bel Abbès (2007).
Alrassis A, Contribution à l’étude de la déchirure ductile à chaud dans les joints soudés et modélisation numérique en approche globale et en approche locale, Thèse de doctorat, Université des Sciences et Technologies de Lille, Villeneuve-d’Ascq (1995).
Rice J R, and Tracey D M, Computational Fracture Mechanics, Numerical and Computer Methods in Structural Mechanics, (eds) Fenves S J et al., Academic Press, New York (1973), pp. 585–623.
ASTM, Plane-Strain Fracture Toughness of Metallic Materials, Determination of Fracture Toughness, E399-90, (1990).
Rice J R, and Tracey D M, J Mech Phys Solids 17 (1969), p 201.
Mudry F, Etude de la rupture ductile et de la rupture par clivage d’aciers faiblement allies, université de technologie de Compiègne, Compiègne (1982).
Huang Y, Accurate Dilatation Rates for Spherical Voids in Triaxial Stress Fields, Division of Applied Science Harvard University (1989).
Eshelby J D, Calculation of Energy Release Rate, Propects of Fracture Mechanics Sih, Van Elst, Broeck Ed Noordhoff (1974), p 69.
Cheperanov G P, Appt Math Mech Trans 31 (1967), p 504.
Rice J R, J Appl Mech 35 (1968), p 379.
Inal K, M’cirdi L, Lebrun J L, and Barbier G, Duplex 2000 (2000), p 173.
Benguediab M, Etude de propagation des fissures de fatigue sous spectre de chargements réduits, Thèse de doctorat, Université de Poitiers, Poitiers (1989).
Ranganathan N, Contribution au développement d’une approche énergétique à la propagation d’une fissure de fatigue, Thèse de doctorat, Université de Poitiers, Poitiers (1985).
Earthman J C and Nix W D, Acta Metall 35 (1987), p 1475.
ASTM, Standard test method for JIc, a measure of fracture toughness ASTM Standard, E813-89, (1989).
Wilsus J, Etude expérimentale et numérique de la déchirure ductile basée sur des approches locales en mécanique de la rupture, Thèse de doctorat, Université des Sciences et Technologies de Lille, Villeneuve-d’Ascq (1999).
Acknowledgments
Extend my sincere thanks to all members participating in the preparation of this work, and especially my teacher B. Bouchouicha who was framing this work, also I want to thank my colleagues who have helped me in the extraction of the results, and do not forget also the member S. Slimane to assist in the software, correct the results and preparation of the article.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Slimane, A., Bouchouicha, B., Benguediab, M. et al. Contribution to the Study of Fatigue and Rupture of Welded Structures in Carbon Steel-A48 AP: Experimental and Numerical Study. Trans Indian Inst Met 68, 465–477 (2015). https://doi.org/10.1007/s12666-014-0477-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-014-0477-5