Advertisement

Transactions of the Indian Institute of Metals

, Volume 67, Issue 5, pp 659–665 | Cite as

Comparison of Microparticles and Nanoparticles Effects on the Bonding of Roll Bonded IF Steel

  • Roohollah Jamaati
  • Mohammad Reza Toroghinejad
  • Hossein Edris
Technical Paper

Abstract

In the present work, the effect of silicon carbide (SiC) particle size on the characteristics of cold roll bonded interstitial free (IF) steel strips, such as bond strength and peeled surface were carried out and compared to those of IF steel strip without particles. The bond strength was evaluated by the peeling test and scanning electron microscopy. It was found that with increasing thickness reduction, the bond strength of IF steel strips improved. The results also indicated that the presence of SiC particles (both micro and nano) decreased the bond strength of IF steel strips. Also, with increasing the particle size, the bond strength improved. It was found that for sample with microparticles compared to sample with nanoparticles, beyond the 80 % thickness reduction, a sudden increase in the average peel strength was observed. Finally, the results indicated that in the presence of nanoparticles between strips there were two types of unbonded area and the bond strength of these two areas was quite similar to each other.

Keywords

IF steel Nanoparticles Microparticles Cold roll bonding Bond strength 

References

  1. 1.
    Lee S H, Utsunomiya H, and Sakai T, Metall Mater Trans A 45 (2004) 2177.Google Scholar
  2. 2.
    Purcek G, Saray O, Karman I, and Maier H J, Metall Mater Trans A 43 (2012) 1884.CrossRefGoogle Scholar
  3. 3.
    Narayanasamy R, and Narayanan C S, Mater Des 29 (2008) 1467.CrossRefGoogle Scholar
  4. 4.
    Saray O, Purcek G, Karaman I, Neindorf T, and Maier H J, Mater Sci Eng A 528 (2011) 6573.CrossRefGoogle Scholar
  5. 5.
    Jamaati R, Toroghinejad M R, and Maier H J, Mater Sci Eng A 527 (2010) 4146.CrossRefGoogle Scholar
  6. 6.
    Jamaati R, and Toroghinejad M R, Mater Des 31 (2010) 4816.CrossRefGoogle Scholar
  7. 7.
    Jamaati R, Amirkhanlou S, Toroghinejad M R, Niroumand B, and Maier H J, Mater Sci Eng A 528 (2011) 2143.CrossRefGoogle Scholar
  8. 8.
    Jamaati R, Toroghinejad M R, and Maier H J, Mater Sci Eng A 527 (2010) 7430.CrossRefGoogle Scholar
  9. 9.
    Amirkhanlou S, Jamaati R, Niroumand B, and Toroghinejad M R, J Mater Process Technol 211 (2011) 1159.CrossRefGoogle Scholar
  10. 10.
    Jamaati R, Amirkhanlou S, Toroghinejad M R, and Niroumand B, Mater Sci Eng A 528 (2011) 2495.CrossRefGoogle Scholar
  11. 11.
    Jamaati R, Toroghinejad M R, Dutkiewicz J, and Szpunar J A, Mater Des 35 (2012) 37.CrossRefGoogle Scholar
  12. 12.
    Jamaati R, Toroghinejad M R, and Najafizadeh A, Mater Sci Eng A 527 (2010) 2720.CrossRefGoogle Scholar
  13. 13.
    Jamaati R, Toroghinejad M R, and Najafizadeh A, Mater Sci Eng A 527 (2010) 3857.CrossRefGoogle Scholar
  14. 14.
    Jamaati R, Amirkhanlou S, Toroghinejad M R, and Niroumand B, Mater Charact 62 (2011) 1228.CrossRefGoogle Scholar
  15. 15.
    Hashemi M, Jamaati R, and Toroghinejad M R, Mater Sci Eng A 532 (2012) 275.CrossRefGoogle Scholar
  16. 16.
    Amirkhanlou S, Jamaati R, Niroumand B, and Toroghinejad M R, Mater Sci Eng A 528 (2011) 4462.CrossRefGoogle Scholar
  17. 17.
    Amirkhanlou S, Jamaati R, Niroumand B, and Toroghinejad M R, Mater Manuf Process 26 (2011) 902.CrossRefGoogle Scholar
  18. 18.
    Jamaati R, and Toroghinejad M R, J Mater Eng Perform 21 (2012) 859.Google Scholar
  19. 19.
    Jamaati R, and Toroghinejad M R, Mater Sci Technol 27 (2011) 1648.CrossRefGoogle Scholar
  20. 20.
    Jamaati R, and Toroghinejad M R, Mater Sci Eng A 527 (2010) 2320.CrossRefGoogle Scholar
  21. 21.
    Jamaati R, and Toroghinejad M R, Mater Des 31 (2010) 4508.CrossRefGoogle Scholar
  22. 22.
    Jamaati R, and Toroghinejad M R, J Mater Eng Perform 20 (2011) 191.CrossRefGoogle Scholar
  23. 23.
    Jamaati R, and Toroghinejad M R, Mater Sci Technol 27 (2011) 1101.CrossRefGoogle Scholar
  24. 24.
    Jamaati R, and Toroghinejad M R, Mater Sci Eng A 527 (2010) 4858.CrossRefGoogle Scholar
  25. 25.
    Soltani M A, Jamaati R, and Toroghinejad M R, Mater Sci Eng A 550 (2012) 367.CrossRefGoogle Scholar
  26. 26.
    Alizadeh M, and Paydar M H, Mater Des 30 (2009) 82.CrossRefGoogle Scholar
  27. 27.
    Lu C, Tieu K, and Wexler D, J Mater Process Technol 209 (2009) 4830.CrossRefGoogle Scholar
  28. 28.
    Bay N, Met Constr 18 (1986) 486.Google Scholar
  29. 29.
    Bay N, Met Constr 18 (1986) 369.Google Scholar
  30. 30.
    Bay N, Met Constr 18 (1986) 625.Google Scholar
  31. 31.
    Vaidyanath L R, Nicholas M G, and Milner D R, Br Weld J 6 (1959) 13.Google Scholar
  32. 32.
    Quadir M Z, Wolz A, Hoffman M, and Ferry M, Scr Mater 58 (2008) 959.CrossRefGoogle Scholar
  33. 33.
    Bay N, Int Weld J 62 (1983) 137.Google Scholar
  34. 34.
    Vaidyanath L R, and Milner D R, Br Weld J 7 (1960) 1.Google Scholar
  35. 35.
    Callister W D, and Rethwisch D G, Materials Science Engineering: An Introduction, 8th edn., John Wiley and Sons, New York (2010).Google Scholar
  36. 36.
    Askeland D R, Fulay P P, and Wright W J, The Science and Engineering of Materials, 6th edn, Global Engineering, USA (2011).Google Scholar

Copyright information

© Indian Institute of Metals 2014

Authors and Affiliations

  • Roohollah Jamaati
    • 1
    • 2
  • Mohammad Reza Toroghinejad
    • 1
  • Hossein Edris
    • 1
  1. 1.Department of Materials EngineeringIsfahan University of TechnologyIsfahanIran
  2. 2.Young Researchers and Elite Club, Ayatollah Amoli BranchIslamic Azad UniversityAmolIran

Personalised recommendations