Abstract
Aluminum–lead/10 wt% fly-ash powder mixtures containing 0–20 wt% lead (Pb) were prepared. These powder mixes were compacted in the pressure range of 200–400 MPa by single action die compaction process. The prepared compacts were sintered in the temperature range of 500, 530, 560 and 590 °C in an argon gas atmosphere for duration of 45 min. For the sintered compacts, the sintered density, hardness and compressive strength were reported. Sintered density, hardness and compressive strength increased with the increase in compaction pressure. Sintered density increased whereas the hardness and the compressive strength decreased with the addition of Pb.
Similar content being viewed by others
References
Ahmaruzzaman M, Prog Energy Combust Sci 36 (2010) 327.
Rohatgi P K, Weiss D, and Gupta N, JOM 58 (2006) 71.
Suresh N, Venkateswaran S, Seetharamu S, Mater Sci-Pol 28 (2010) 55.
Guo R Q, Rohatgi P K, and Nath D, J Mater Sci 31 (1996) 5513.
Ramana B, Murthy G S, in Third national symposium of research scholars (NSRS3), IIT Madras, Sep.2000.
Daoud A, Abou El-Khair A T, Shenouda A Y, Mohammed E, and Rohatgi P K, Mater Sci Eng A 526 (2009) 225.
Nath D, Ramana B, and Chandra S, Powder Metall Sci Technol 5 (1994) 25.
Nath D, Chandra S, and Bolla R, Trans Indian Inst Met 48 (1995) 63.
Guo R Q, Rohatgi P K, and Nath D, J Mater Sci 32 (1997) 3971.
Pichi Reddy S, Ramana B, and Chennakesava Reddy A, J Manuf Eng 5 (2010) 55.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pichi Reddy, S., Ramana, B. & Chennakesava Reddy, A. Sintering Characteristics of Al–Pb/Fly-Ash Metal Matrix Composites. Trans Indian Inst Met 66, 87–95 (2013). https://doi.org/10.1007/s12666-012-0230-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-012-0230-x