Abstract
Friction surfacing is a candidate process for depositing corrosion and wear resistant coatings. Being a solid-state process, it offers several advantages over conventional fusion welding based surfacing process. In the current work, martensitic stainless steel AISI 410 was friction surfaced over mild steel substrates. Coating microstructures were characterized using light microscopy, scanning electron microscopy and Xray diffraction. Coatings in as-deposited condition exhibited a fully martensitic microstructure and were found to be quite hard (with an average hardness of 460 HV). Bend and shear tests indicated excellent coating/substrate bonding. Overall, the current work shows that martensitic stainless steel AISI 410 can be satisfactorily friction surfaced on mild steel.
Similar content being viewed by others
References
Khalid Rafi H, Janaki Ram G D, Phanikumar G and Prasad Rao K, Materials & Design, 32 (2011) 82.
Chandrasekaran M, Batchelor AW and Jana S, Journal of Materials Science, 33 (1998) 2709.
Madhusudhan Reddy G, Srinivasa Rao K and Mohandas T, Surface Engineering, 25 (2009) 25.
Madhusudhan Reddy G, Srinivasa Rao K and Mohandas T, Surface Engineering (2009) DOI: 10.1179/174329409X451128
Bedford GM, Vitanov VI and Voutchkov II, Surface and Coatings Technology, 141 (2001) 34.
Liu XM, Zou ZD, Zhang YH, Qu SY and Wang XH, Surface & Coatings Technology, 202 (2008) 1889.
Vitanov VI, Voutchkov II and Bedford GM, Surface & Coatings Technology, 140 (2001) 256.
Vitanov VI, Javaid N and Stephenson DJ, Surface & Coatings Technology, 204 (2010) 3501.
Yamashita Y and Fujita K, Journal of Nuclear Science and Technology, 38 (2001) 896.
Lippold JC and Kotechi DJ, Welding Metallurgy and Weldability of Stainless Steels, John Weiley & Sons, Inc., New Jersey, USA (2005).
Grainger S and Blunt J, Engineering Coatings — Design and Application, 2nd edition, Abington Publishing, Cambridge, UK (1998) 78.
Khalid Rafi H, Janaki Ram G D, Phanikumar G and Prasad Rao K, Surface & Coatings Technology, 205 (2010) 232.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Puli, R., Kumar, E.N. & Janaki Ram, G.D. Characterization of friction surfaced martensitic stainless steel (AISI 410) coatings. Trans Indian Inst Met 64, 41 (2011). https://doi.org/10.1007/s12666-011-0008-6
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12666-011-0008-6