Skip to main content
Log in

Application of induced polarization and resistivity to the environmental investigation of an old waste disposal area

  • Original Article
  • Published:
Environmental Earth Sciences Aims and scope Submit manuscript

Abstract

Waste disposal in dumpsites, or even in sanitary landfills, can generate contamination plumes in the subsurface. The detection and delineation of the shape of the contaminant plume can be assessed using monitoring systems or different site investigation methods, including geophysical methods. This paper presents the results of a geophysical survey conducted to map the soil contamination produced by a waste disposal site located at a geological vulnerable area, characterized by a trench that resulted from the collapse of sandy soils due to erosion. This paper aims to show the improvement in mapping a waste deposit and the contamination produced in sandy soils by integrating resistivity and induced polarization methods. The results of three survey lines performed to map the site are presented—two across the deposit and one external to it; and resistivity, chargeability and normalized chargeability sections were generated. The geoelectrical sections interpretation was integrated with information from monitoring wells to help the characterization of the waste area and to evaluate soil and groundwater contamination. The results show that resistivity identifies the wastes, the contaminated soil and the contamination plume, but it does not distinguish these zones. Normalized chargeability, on the other hand, is more effective in distinguishing the areas with wastes from the areas impacted by the contamination plume.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  • ASTM (1994) ASTM D3385-88. Standard method for infiltration rate of soils in field using double-ring infiltrometers. Annual book of American Society of Testing Materials Standards, Philadelphia, vol 04.08, pp 321–327

  • Bernstone C, Dahlin T, Ohlsson T, Hogland W (2000) DC-resistivity mapping of internal landfill structures: two pre-excavation surveys. Environ Geol 39(3–4):360–371

    Article  Google Scholar 

  • Breede K, Kemna A, Esser O, Zimmermann E, Vereecken H, Huisman JA (2012) Spectral induced polarization measurements on variable saturated sand-clay mixtures. Near Surf Geophys 10(6):479–489

    Google Scholar 

  • Griffiths DH, Barker RD, Finch JW (1981) Recent applications of electrical resistivity and induced polarization methods to hydrogeological problems. In: A survey of British hydrogeology 1980. The Royal Society, London, pp 85–96

  • Johansson B, Jones S, Dahlin T, Flyhammar P (2007) Comparisons of 2D and 3D inverted resistivity data as well as of resistivity and IP surveys on a landfill. Near surface 2007—13th European meeting of environmental and engineering geophysics, Istanbul

  • Klein JD, Sill WR (1982) Electrical properties of artificial claybearing sandstone. Geophysics 47(11):1593–1605

    Article  Google Scholar 

  • Loke MH (2007) RES2DINV 3.55 for Windows 98/Me/2000/NT/XP. Rapid 2D Resistivity and IP Inversion using the leastsquares method. Software Manual, p 133

  • Meju MA (2000) Geoelectrical investigation of old/abandoned, covered landfill sites in urban areas: model development with a genetic diagnosis approach. J Appl Geophys 44:115–150

    Article  Google Scholar 

  • Slater LD, Lesmes D (2002) IP interpretation in environmental investigations. Geophysics 67(1):77–88

    Article  Google Scholar 

  • Telford WH, Geldart LP, Sheriff RE (1990) Applied Geophysics, 2nd ed. Cambridge University Press, p 860

  • Ustra AT, Elis VR, Mondelli G, Zuquette LV, Giacheti HL (2012) Case study: a 3D resistivity and induced polarization imaging from downstream a waste disposal site in Brazil. Environ Earth Sci 66(3):763–772

    Article  Google Scholar 

  • Viezzoli A, Cull JP (2005) Electrical methods for detection and discrimination of saline groundwater in clay-rich sediments in northern Victoria. Explor Geophys 31:294–300

    Article  Google Scholar 

  • Vinegar HJ, Waxman MH (1984) Induced polarization of shaly sands. Geophysics 49(8):1267–1287

    Article  Google Scholar 

  • Weller A, Breede K, Slater L, Nordsiek S (2011) Effect of changing water salinity on complex conductivity spectra of sandstones. Geophysics 76(5):315–327

    Article  Google Scholar 

  • Weller A, Slater L, Nordsiek S (2013) On the relationship between induced polarization and surface conductivity: implications for petrophysical interpretation of electrical measurements. Geophysics 78(5):315–325

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Vagner Roberto Elis.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Elis, V.R., Ustra, A.T., Hidalgo-Gato, M.C. et al. Application of induced polarization and resistivity to the environmental investigation of an old waste disposal area. Environ Earth Sci 75, 1338 (2016). https://doi.org/10.1007/s12665-016-6157-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s12665-016-6157-5

Keywords

Navigation