Abstract
This paper presents prediction of minimum factor of safety (FS) against slope failure in clayey soils using artificial neural network (ANN). Two multilayer perceptron ANN models were used to predict the minimum factor of safety using different data sets of geometric and shear strength parameters and based on the four well-known methods of Fellenius (Ordinary), Bishop, Janbu, and Spencer, respectively. The input parameters used to train and test the two ANN models include the reciprocal of slope tangent β, angle of internal friction of soil φ (o), height of the slope H (m), cohesion of the soil c (kN/m2), unit weight of the soil γ (kN/m3) and the stability number m (c/γH). The output parameter for both ANN is the FS of the slope. The number of hidden layers and the number of neurons in each hidden layer were determined by trial and error to achieve the best results. It is observed that both ANN predictions are very close to the FS calculated by each of the corresponding four methods, separately. However, the ANN model with the scaled down number of input parameters showed better performance and the best one has a normalized mean square error of 0.0073, mean absolute percent error (MAPE) of 1.52 % and correlation coefficient (r) of 0.9966. It is concluded that such ANN models are reliable, simple and valid computational tools for predicting the FS and for assessing the stability of slopes of clayey soil. Six known case studies that are based on different methods were used to further test and validate the accuracy of the ANN model. It was observed that the ANN model predictions of FS of the case studies were very accurate with MAPE of 3.72 % for all methods combined. Based on the developed ANN model, a parametric study was then carried out to investigate the influence of the slope angle (β), stability number (m) and angle of internal friction (φ) on the factor of safety and slope stability of clayey soil.
Similar content being viewed by others
Abbreviations
- FS :
-
Factor of safety
- b :
-
Width of the slice
- H :
-
Height of the slope
- c :
-
Cohesion of the soil
- c′:
-
Effective cohesion of the soil
- m :
-
Stability number
- h :
-
Average height of the slice
- ha :
-
Height to the center of the slice
- Sm :
-
Mobilized shear strength
- W :
-
Weight of slice
- Ww:
-
Surface water force
- hL :
-
Height of force ZL
- Q :
-
External surcharge
- N′:
-
Effective normal force
- Kh :
-
Horizontal seismic coefficient
- μ:
-
Angle of inclination of external load
- U :
-
Pore water pressure
- ZL :
-
Left inter-slice force
- ZR :
-
Right inter-slice force
- δL :
-
Left inter-slice force inclination angle
- δR :
-
Right inter-slice force inclination angle
- hR :
-
Height of force ZR
- α:
-
Inclination of slice base
- β:
-
Inclination of slice top
References
Abdalla JA, Hawileh R (2013) Artificial neural network predictions of fatigue life of steel bars based on hysteretic energy. ASCE J Comput Civil Eng Am Soc Civil Eng 27(5):489–496
Alonso EE, Pinyol NM (2010) Criteria for rapid sliding I. a review of vaiont case.”. Eng Geol 114:198–210
Bishop AW (1955) The use of the slip circle in the stability analysis of slopes. Geotechnique 5(1):7–17
Cernica JN (1982) Geotechnical engineering. Holt-Saunders International Edition, Japan
Chang S-K, Lee D-H, Wu J-H, Juang CH (2011) Rainfall-based criteria for assessing slump rate of mountainous highway slopes: a case study of slopes along Highway 18 in Alishan, Taiwan. Eng Geol 118:63–74
Cheng YM, Lansivaara T, Wei WB (2007) Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods. Comput Geotech 34(3):137–150
Cho SE (2009) Probabilistic stability analyses of slopes using the ANN-based response surface. Comput Geotech 36(5):787–797
Chok YH (2008) Modeling the effects of soil variability and vegetation on the stability of natural slopes Thesis submitted for the degree of Doctor of Philosophy, School of Civil Environmental and Mining Engineering. The University of Adelaide, Australia
Das BM (2007) Principles of Geotechnical Engineering. Thomson Learning Corporation, International Student Edition, Canada
Das BM (ed) (2008) Fundamentals of geotechncial engineering. Thomson, Singapore
Das BM (2010) Principles of geotechnical engineering” CENGAGE Learning. Seventh Edition, USA
Das SK, Biswal RK, Sivakugan N, Das B (2011) Classification of slopes and prediction of factor of safety using differential evolution neural networks. Environ Earth Sci 64(1):201–210
Duncan JM (1996) State of the Art: limit state equilibrium and finite element analysis of slopes. J Geotech Geoenviron Eng 122(7):577–596
Duncan JM, Wright SG (1980) The accuracy of equilibrium methods of slope stability analysis. Eng Geol 16(1–2):5–17
Fellenius W (1936) Calculations of the stability of earth dams. Transaction of the 2nd Congress on Large Dams 4, Washington, DC
Ferentinou MD, Sakellariou MG (2007) Computational intelligence tools for the prediction of slope performance. Comput Geotech 34(5):362–384
Flood I, Kartam N (1994) Neural networks in civil engineering, I: principles and understanding, II: systems and application. J Comput Civil Eng 8(2):131–162
Fredlund DG (1984) Analytical methods for slope stability analysis. Proceedings of the Fourth International Symposium on Landslides, State-of-the-Art, Toronto, pp 229–250
Fredlund DG, Krahn J, Pufahl DE (1981) The relationship between limit equilibrium slope stability methods. In: Proceedings 10th Int. Con. on Soil Mechanics and Foundation Engineering, Balkema AA, Rotterdam, The Netherlands 3, 409–416
Goh ATC, Wong KS, Broms BB (1995) Estimation of lateral wall movements in braced excavations using neural networks. Can Geotech J 32:1059–1064
Janbu N (1954) Applications of composite slip surfaces for stability analysis. In: Proceedings of the European Conference on the Stability of Earth Slopes, Stockholm. vol 3, pp 39–43
Juang CH, Elton DJ (1997) Predicting collapse potential of soils with neural networks. Transp Res Rec 1582:22–28
Juang CH, Chen CJ, Tien YM (1999) Appraising CPT-based liquefaction resistance evaluation methods—artificial neural network approach. Can Geotech J 36(3):443–454
Jurado A, de Gaspari F, Vilarrasa V, Bolster D, Sánchez-Vila X, Fernández-García D, Tartakovsky DM (2012) Probabilistic analysis of groundwater-related risks at subsurface excavation sites. Eng Geol 125:35–44
Kahatadeniya KS, Nanakorn P, Neaupane KM (2009) Determination of the critical failure surface for slope using ant colony optimization. Eng Geol 108(1–2):133–141
Kaunda RB, Chase RB, Kehew AE, Kaugars K, Selegean JP (2010) Neural network modeling applications in active slope stability problems. Environ Earth Sci 60(7):1545–1558
Leshchinsky D, Huang CC (1992) Generalized Three-Dimensional Slope Stability Analysis. J Geotech Eng 118(11):1748–1764
Lin HM, Chang SK, Wu JH, Juang CH (2009) Neural network-based model for assessing failure potential of highway slopes in the Alishan, Taiwan area: pre- and post-earthquake investigation. Eng Geol 104(3–4):280–289
Malkawi A, Hassan WF (2003) USER’S MANUAL FOR SAS-MCT 4.0, A Computer Program for Stability Analysis of Slopes Using Monte Carlo Technique. Jordan University of Science and Technology
Martins FF, Valente BDSS, Vieira CFS, Martins JB (2011) Slope stability of embankment. University of Mino, Portugal Martins
Michalowski RL (1995) Slope stability analysis: a kinematical approach. Geotechniques 45(2):283–293
Nash D (1987) A comparative review of limit equilibrium methods of stability analysis. Anderson MG, Richards KS (edn) Slope stability: geotechnical engineering and geomorphology. John Wiley and Sons, New York, pp 11–75
Neurosolutions software version 5.0., 2011. Source: http://www.nd.com. Accessed Nov 2011
Ni SH, Lu PC, Juang CH (1996) A fuzzy neural network approach to evaluation of slope failure potential. J Microcomput Civil Eng 11(1):59–66
Pinyol NM, Alonso EE, Corominas J, Moya J (2012) Canelles landslide: modelling rapid drawdown and fast potential sliding. Landslides 9(1):33–51
Sakellariou MG, Ferentinou M (2005) A study of slope stability prediction using neural networks. Geotech Geol Eng 23(4):419–445
Seed RB, Mitchell JK, Seed HB (1990) Kettleman Hills Waste Landfill Slope Failure. II: stability Analyses. J Geotech Eng 116(4):669–690
Sengupta A, Upadhyay A (2009) Locating the critical failure surface in a slope stability analysis by genetic algorithm. Appl Soft Comput 9(1):387–392
Shahin MA, Jaksa MB, Maier HR (2001) Artificial neural network applications in geotechnical Engineering. Aust Geomech 36(1):49–62
Shahin MA, Jaksa MB, Maier HR (2008) State of the art of artificial neural networks in geotechnical engineering. Electronic J Geotech Eng http://www.ejge.com. ISSN: 1089–3032
Spencer E (1967) A method of analysis of the stability of embankments assuming parallel interslice forces. Geotechnique 17(1):11–26
Tartakovsky DM (2013) Assessment and management of risk in subsurface hydrology: a review and perspective. Adv Water Resour 51:247–260
Ural DN, Tolon M (2008) Slope Stability during Earthquakes: a neural network application. In: Proceedings of sessions of GeoCongress 2008: Characterization Monitoring, and Modeling of GeoSystems (GSP 179)
Wang HB, Xu WY, Xu RC (2005) Slope stability evaluation using Back Propagation Neural Networks. Eng Geol 80(3–4):302–315
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Abdalla, J.A., Attom, M.F. & Hawileh, R. Prediction of minimum factor of safety against slope failure in clayey soils using artificial neural network. Environ Earth Sci 73, 5463–5477 (2015). https://doi.org/10.1007/s12665-014-3800-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12665-014-3800-x