Advertisement

Extruded Fiber-Reinforced Composites Manufactured from Recycled Wind Turbine Blade Material

  • Seyed Hossein MamanpushEmail author
  • Hui Li
  • Karl Englund
  • Azadeh Tavousi Tabatabaei
Original Paper
  • 23 Downloads

Abstract

Energy conservation is one of the most challenging issues throughout the world. As consumers demand alternatives to fossil fuel, the use of alternative energy sources including wind energy is increasing. With an increase in the use of wind energy a collateral issue of what to do with the large and voluminous wind turbine blades (WTB) has arisen. Currently, there are no economically viable recycling pathways for damaged or end-of-life WTBs, which are made primarily of glass fiber composites. This research evaluates an economically viable composite fabrication system using mechanically recycled WTB (rWTB) material as a feedstock for thermoplastic composites. The WTB material was first mechanically milled and classified through a range of varying screen sizes. We then blended this with high density polyethylene (HDPE) thermoplastic resin and extruded it to a profiled composite. We determined the influence of refined particle size, resin content and coupling agents [maleic anhydride polyethylene (MAPE) and methacryloxypropyltriethoxysilane (Silane)] on the properties of recycled composites. We also obtained static bending, coefficient of linear thermal expansion (CLTE) and water sorption properties for all composites. Overall improvement of mechanical and physical properties of composites achieved by using MAPE as a coupling agent. Findings show that mechanical recycling of wind turbine blades is a feasible and promising way to fabricate a high-performance second-generation composite.

Keywords

Recycling Wind turbine blade Polymer-matrix composite Glass fiber 

Notes

Acknowledgements

The authors gratefully appreciate the financial support by Global Fiberglass Solutions Inc. Bothell, WA.

Compliance with Ethical Standards

Conflict of interest

The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

References

  1. 1.
    Liu, P., Barlow, C.W.: Wind turbine blade waste in 2015. Waste Manag. 62, 229–240 (2017)CrossRefGoogle Scholar
  2. 2.
    Beauson, J., Madsen, B., Toncelli, C., et al.: Recycling of shredded composites from wind turbine blades in new thermoset polymer composites. Composites A 90, 390–399 (2016)CrossRefGoogle Scholar
  3. 3.
    Mamanpush, S.H., Li, H., Englund, K., Tabatabaei, A.T.: 2018, Recycled wind turbine blades as a feedstock for second generation composites. Waste Manag.  https://doi.org/10.1016/j.wasman.2018.02.050 Google Scholar
  4. 4.
    Kennerley, J.R., Kelly, R.M., Fenwick, N.J., et al.: The characterization and reuse of glass fibres recycled from scrap composites by the action of a fluidised bed process. Composites A 29(7), 839–845 (1998)CrossRefGoogle Scholar
  5. 5.
    Mamanpush, S.H., Tabatabaei, A.T., Li, H., Englund, K.: Data on the mechanical properties of recycled wind turbine blade composites. Data Brief. 19, 230–235 (2018).  https://doi.org/10.1016/j.dib.2018.05.008 CrossRefGoogle Scholar
  6. 6.
    Palmer, J.: Mechanical Recycling of Automotive Composites for Use as Reinforcement in Thermoset Composites. PhD thesis, University of Exeter, pp. 224 (2009)Google Scholar
  7. 7.
    Phoenix Fibreglass Inc: Fibreglass Composite Recycling: Report. Ministry of Environment and Energy, Ontario (1994)Google Scholar
  8. 8.
    Yazdanbakhsh, A., Bank, L.C., Rieder, K.A., et.al: Concrete with discrete slender elements from mechanically recycled wind turbine blades. Resour. Conserv. Recycl. 128, 11–21 (2018)CrossRefGoogle Scholar
  9. 9.
    Standard test method for compositional analysis by thermogravimetric, ASTM E1131-08 (2012)Google Scholar
  10. 10.
    Xanthos, M.: Functional Fillers for Plastics. Wiley, Hoboken (2005).  https://doi.org/10.1002/3527605096 CrossRefGoogle Scholar
  11. 11.
    Srubar, W.V. III, Frank, C.W., Billington, S.L.: Modeling the kinetics of water transport and hydro expansion in a lignocellulose-reinforced bacterial copolyester. Polymer. 53, 2152–2161 (2012).  https://doi.org/10.1016/j.polymer.2012.03.036 CrossRefGoogle Scholar
  12. 12.
    Munder, S., Argyropoulos, D., Müller, J.: Acquisition of sorption and drying data with embedded devices: improving standard models for high oleic sunflower seeds by continuous measurements in dynamic systems. Agriculture 9(1), 1 (2019)CrossRefGoogle Scholar
  13. 13.
    Mamanpush, S.H., Li, H., Englund, K., Tabatabaei, A.T.: Dataset demonstrating physical properties of recycled wind turbine blade composites. Data Brief 20, 658–661 (2018)CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  1. 1.Composite Materials and Engineering CenterWashington State UniversityPullmanUSA

Personalised recommendations