Abstract
In the present investigation, a fusion–fission hybrid reactor system was designed by using 9Cr2WVTa ferritic steel structural material and 99–95 % Li20Sn80-1–5 % SFG-Pu, 99–95 % Li20Sn80-1–5 % SFG-PuF4, 99–95 % Li20Sn80-1–5 % SFG-PuO2 the molten salt-heavy metal mixtures, as fluids. The fluids were used in the liquid first wall, blanket and shield zones of a fusion–fission hybrid reactor system. Beryllium zone with the width of 3 cm was used for the neutron multiplicity between liquid first wall and blanket. The contributions of each isotope in fluids on the nuclear parameters of a fusion–fission hybrid reactor such as tritium breeding ratio, energy multiplication factor, heat deposition rate were computed in liquid first wall, blanket and shield zones. Three-dimensional analyses were performed by using Monte Carlo code MCNPX-2.7.0 and nuclear data library ENDF/B-VII.0.
Similar content being viewed by others
References
S Şahin and M Übeyli Energy Convers. Manag. 46 3185 (2005)
H M Şahin Ann. Nucl. Energy 34 861 (2007)
B Şarer, M Günay, M E Korkmaz and A Hançerlioğulları Fusion. Sci. Technol. 52 107 (2007)
M Günay, B Şarer and Y Çelik Ann. Nucl. Energy 38 2757 (2011)
M Günay, B Şarer and A Hançerlioğulları Ann. Nucl. Energy 55 292 (2013)
N C Christofilos J. Fusion. Energy 8 97 (1989)
R W Moir Nucl. Fusion 37 557 (1997)
M A Abdou et al. APEX Interim. Rep. Chap. 1 4 (1999)
M A Abdou et al. Fusion. Eng. Des. 54 181 (2001)
M A Abdou Fusion. Eng. Des. 72 1 (2004)
M A Abdou, N B Morley, A Y Ying, S Smolentsev and P Calderoni Nucl. Eng. Tech. 37 401 (2005)
M A Abdou Appl. Electromagn. Mech. 9 151 (2001)
A Ying et al. APEX Interim. Rep. Chap. 5 2 (1999)
M Z Youssef and M A Abdou Fusion. Eng. Des. 49 719 (2000)
M Z Youssef, M E Sawan and D K Sze Fusion. Eng. Des. 61 497 (2002)
Nuclear Power Technology Development Section IAEA-TECDOC-1349 (Austria: IAEA) (2003)
B Şarer, A Aydın, M Günay, M E Korkmaz and E Tel Ann. Nucl. Energy 36 417 (2009)
M Günay Ann. Nucl. Energy 53 59 (2013)
M B Chadwick et al. Nucl. Data Sheets 107 2931 (2006)
D B Pelowitz MCNPX User’s Manual Ver. 2.7.0 LA-CP-11-00438 Los Alamos National Laboratory 5 (2011)
S Kumari and A K Nirala Indian J. Phys. 86 97 (2012)
M E Sawan and M A Abdou Fusion. Eng. Des. 81 1131 (2006)
R E Nygren et al. Fusion. Eng. Des. 72 181 (2004)
M Z Youssef, N Morley and A El-Azabet 13th Topical Meet. Tech. Fusion Power Nashville, Tennessee (1998)
M Ubeyli J. Fusion. Energy 22 51 (2003)
S Yalçın, M Ubeyli and A Acır Sadhana 30 585 (2005)
S Şahin and M Übeyli Energy Convers. Manag. 45 1497 (2004)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Günay, M., Şarer, B. & Kasap, H. Contributions of each isotope in some fluids on neutronic performance in a fusion–fission hybrid reactor: a Monte Carlo method. Indian J Phys 88, 861–866 (2014). https://doi.org/10.1007/s12648-014-0496-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12648-014-0496-4