Abstract
This paper presents an automated vision based measurement system for two wheeler engine crankshafts. The system is able to perform the measurements within an accuracy of ±10 µm. Two setups are arrived at for measuring different parameters and the measurement software is developed. The results from the vision system are compared with readings from conventional measuring equipments and accuracies achieved are tabulated.
References
K. Takamasu, Present problems in coordinate metrology for nano and micro scale measurements, MAPAN-J. Metrol. Soc. India, 26(1) (2011) 3–14.
Y.-C. Wang, J.-C. Lin and S.-F. Chiu, Automatic inspection system for dimensional measurements of the saw blade milling cutter, J. Ind. Eng. Manag, 3(2) (2010) 370–382.
V. Smutny, V. Hlavac and P. Palatka, High precision measurements of small backlit objects in mechanical engineering, in: IECON 98, Proceedings of the 24th annual conference of the IEEE, Aachen, vol. 2 (1998) 1226–1229.
K.P. Chaudhary, C. Shakher and S. K. Singh, Measurement of the size and spacing of standard wire sieves using an image processing system and wavelet transform, MAPAN-J. Metrol. Soc. India, 26(1) (2011) 15–27.
A. Hornberg, Handbook of machine vision, Wiley VCH, Weinheim, (2006).
R. Deepa, S. Usha and P. Babin, Innovative algorithm for external screw thread measurement by machine vision, in: Proceedings of international conference on precision, meso, micro and nano engineering, COPEN-7, Pune (2011) 55–59.
L.W. Nickols, The effective diameter of a parallel screw thread. Prod. Eng, 40(5) (1961) 344–351.
A.T.J. Hayward, Repeatability and accuracy, Mechanical Engineering Publications, London (1977) 24–37.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Deepa, R., Pradyumna, J., Harsha, S. et al. Development of Automated Vision Inspection System for Two Wheeler Engine Crankshaft. MAPAN 30, 273–280 (2015). https://doi.org/10.1007/s12647-015-0145-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12647-015-0145-1