Abstract
AHPCS is a pre-ceramic polymer utilised as a precursor to SiC. An initial polymerisation to a cross-linked network is followed by a complex sequence of processes ultimately leading to amorphous SiC. Using thermal volatilisation analysis (TVA) accompanied with solid-state NMR (SSNMR), FTIR, MS, DSC and TGA the complete thermal profile was identified. Between 160 – 300 °C, AHPCS cross-links through the allyl group and undergoes some carbon-silicon rearrangement, with a volatilisation of low mass oligomeric material and significant volumes of hydrogen released from dehydrocoupling of SiH moieties. By 300 °C the allyl group is completely cross-linked but the polymer starts to undergo pyrolytic degradation of the network, with the release of chain fragments and low molar mass species such as methane, ethane, methanol, propane, propene and silane species. Hydrogen once again becomes the major volatile product above 400 °C due to higher proportion of dehydrocoupling forming Si–C and Si–Si bonds. Small chain fragments are seen in the form of larger alkyl silanes. These fragments come from the chain scission of the polymer at weaker parts of the network. The process of side group scission leads to further radical recombination reactions of silicon and carbon atoms to build the SiC network. By 500 °C higher proportion of dehydrocoupling occurs with recombination of Si–Si and Si–C species. The Si–H bonds in -SiH3 groups have completely cleaved along with C-H bonds in the CH3 and CH2 groups leaving SiC, -SiH and HCSi3 present in the material. This bond cleavage leads the silicon and carbon radical species to undergo radical recombination in the network with the volatile release being dominated by H2. By 650 °C the cleavage and recombination of remaining -SiH2-, -SiH- and HCSi3 groups ultimately form amorphous SiC. The volatiles released are mostly hydrogen with very few condensable products seen. Finally, SiC is then crystallised at higher temperatures forming β-SiC at 1100 °C and then subsequently α-SiC above 1500 °C.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Data Availability
The data required to reproduce these findings are available to download from PURE at the University of Strathclyde (https://doi.org/10.15129/5bef7bd0-535e-4590-9eb9-3112e6493001).
References
Choyke W, Matsunami H, Pensl G (2004) Silicon Carbide Recent Major Advances, 1st edn. Springer-Verlag, New York NY
Oliveros A, Guiseppi-Elie A, Saddow S (2013) Silicon carbide: a versatile material for biosensor applications. Biomed Microdevices 15:353–368. https://doi.org/10.1007/s10544-013-9742-3
Kimoto T, Cooper JA (2014) Applications of Silicon Carbide Devices in Power Systems. Fundamentals of Silicon Carbide Technology, 1st edn. John Wiley & Sons, Singapore, pp 445–486
Yoon T-H, Hong L-Y, Kim D-P (2011) Preparation and Applications of Ceramic Composite Phases from Inorganic Polymers. In: Woo H-G, Li H (eds) Advanced Functional Materials. Springer, Berlin/Heidelberg, pp 103–156
Choyke W, Pensl G (1997) Physical Properties of SiC. MRS Bull 22:25–29. https://doi.org/10.1557/S0883769400032723
Acheson E (1893) Production of artificial crystalline carbonaceous materials, US Patent 492767, 28th February 1893
Acheson E (1893) Carborundum: Its history, manufacture and uses. J Franklin Inst 136:194–203
Riedel R, Passing G, Schönfelder H (1992) Synthesis of dense silicon-based ceramics at low temperatures. Nature 355:714–717. https://doi.org/10.1038/355714a0
Schilling CL, Wesson JP, Williams TC (1983) Polycarbosilane precursors for silicon carbide. J Polym Sci Polym Symp 70:121–128. https://doi.org/10.1002/polc.5070700110
Birot M, Pillot JP, Dunoguès J (1995) Comprehensive Chemistry of Polycarbosilanes, Polysilazanes, and Polycarbosilazanes as Precursors of Ceramics. Chem Rev 95:1443–1477. https://doi.org/10.1021/cr00037a014
Bouillon E, Langlais F, Pailler R, Naslain R, Cruege F, Huong PV, Sarthou JC, Delpuech A, Laffon C, Lagarde P et al (1991) Conversion mechanisms of a polycarbosilane precursor into an SiC-based ceramic material. J Mater Sci 26:1333–1345. https://doi.org/10.1007/BF00544474
Li H, Zhang L, Cheng L, Wang Y, Yu Z (2008) Polymer–ceramic conversion of a highly branched liquid polycarbosilane for SiC-based ceramics. J Mater Sci 43:2806–2811. https://doi.org/10.1007/s10853-008-2539-8
Li H, Zhang L, Cheng L, Wang Y, Yu Z, Huang M, Tu H, Xia H (2008) Effect of the polycarbosilane structure on its final ceramic yield. J Eur Ceram Soc 28:887–891. https://doi.org/10.1016/j.jeurceramsoc.2007.07.020
Sreeja R, Swaminathan B, Painuly A, Sebastian T, Packirisamy S (2010) Allylhydridopolycarbosilane (AHPCS) as matrix resin for C/SiC ceramic matrix composites. Mater Sci Eng 168:204–207. https://doi.org/10.1016/j.mseb.2009.12.033
Kaur S, Riedel R, Ionescu E (2014) Pressureless fabrication of dense monolithic SiC ceramics from a polycarbosilane. J Eur Ceram Soc 34:3571–3578. https://doi.org/10.1016/j.jeurceramsoc.2014.05.002
Yu Z, Min H, Zhan J, Yang L (2012) Preparation and dielectric properties of polymer-derived SiCTi ceramics. Ceram Int 39:3999–4007. https://doi.org/10.1016/j.ceramint.2012.10.250
Li M, Yoon TH, Kim DP (2010) Novel Inorganic Polymer Derived Microfluidic Devices: Materials, Fabrication, Microchemical Performance. Proc 7th Int Conf Nanochannels, Microchannels, Minichannels 2009, ICNMM2009 1279–1286. https://doi.org/10.1115/ICNMM2009-82136
Nader M, Aldinger F, Hoffmann MJ (1999) Influence of the α/β-SiC phase transformation on microstructural development and mechanical properties of liquid phase sintered silicon carbide. J Mater Sci 34:1197–1204
McNeill IC (1966) Thermal volatilization analysis: A new method for the characterization of polymers and the study of polymer degradation. J Polym Sci Part A-1 Polym Chem 4:2479–2485. https://doi.org/10.1002/pol.1966.150041012
Interrante LV, Whitmarsh CW, Sherwood W, Wu H-J, Lewis R, Maciel G (1994) High yield polycarbosilane precursors to stoichiometric SiC. Synthesis, pyrolysis and application. MRS Online Proc Libr 346:593–603
Sorarù GD, Suttor D (1999) High temperature stability of sol-gel-derived SiOC glasses. J Sol-Gel Sci Technol 14:69–74. https://doi.org/10.1023/A:1008775830830
Hurwitz F (1998) 22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings, Volume 19, Issue 4. In: Bray D (ed) Filler/polycarbosilane systems as CMC matrix percursors. John Wiley & Sons Inc, Hoboken, NJ, USA, pp 267–274
Interrante L, Moraes K (2002) Mechanical, thermochemical, and microstructural characterization of AHPCS-derived SiC. In: Kohyama A, Singh M, Lin H-T, Katoh Y (eds) SiC/SiC ceramic composites: developments and applications in energy systems, ceramic transactions. Wiley, NY, pp 125–140
Nguyen CT, Hong L-Y, Kim D-P, Lee J-Y, Woo H-G (2006) Facile Synthetic Route of Polycarbosilane as a SiC Precursor with Zeolite Catalysts. J Ceram Soc Japan 114:487–491. https://doi.org/10.2109/jcersj.114.487
Nair SG, Subramania Siva M, Thomas D, Sreejith KJ, Prabhakaran PV, Devasia R (2019) Liquid polycarbosilane as a potential chemical liquid vapour deposition precursor for SiC. Ceram Int 45:17442–17446. https://doi.org/10.1016/j.ceramint.2019.05.305
Shukla SK, Tiwari RK, Ranjan A, Saxena AK, Mathur GN (2004) Some thermal studies of polysilanes and polycarbosilanes. Thermochim Acta 424:209–217. https://doi.org/10.1016/j.tca.2004.06.003
Huber M, Harvey A (2016) Thermal conductivity of gases. In: Haynes W (ed) CRC handbook of chemistry and physics, 97th edn. CRC Press, Boca Raton FL, p 1305
Shen Q (2010) Composition, preparation of polycarbosilanes and their uses, US Patent 7714092B2, 11th May 2010
Huang M, Fang Y, Li R, Huang T, Yu Z, Xia H (2009) Synthesis and properties of liquid polycarbosilanes with hyperbranched structures. J Appl Polym Sci 113:1611–1618. https://doi.org/10.1002/app.30071
Interrante LV, Whitmarsh CW, Sherwood W, Wu H-J, Lewis R, Maciel G (1995) Hydridopolycarbosilane Precursors to Silicon Carbide. Applications of Organometallic Chemistry in the Preparation and Processing of Advanced Materials. Springer, Netherlands, Dordrecht, pp 173–183
Launer PJ, Arkles B (2013) Infrared analysis of organosilicon compounds: spectra-structure correlations. In: Arkles B, Larson GL (eds) Silicon compounds: silanes & silicones, 3rd edn. Gelest Inc, Morrisville, PA, pp 175–178
Singh S, Potopowicz JR, Van ULG, Wemple SH (1971) Nonlinear optical properties of hexagonal silicon carbide. Appl Phys Lett 19:53. https://doi.org/10.1063/1.1653819
Phillip HR, Taft EA (1964) Kramers-Kronig Analysis of Reflectance Data for Diamond. Phys Rev 136:. https://doi.org/10.1103/PhysRev.136.A1445
Soraru GD, Babonneau F, Mackenzie JD (1990) Structural evolutions from polycarbosilane to SiC ceramic. J Mater Sci 25:3886–3893. https://doi.org/10.1007/BF00582455
Ly HQ, Taylor R, Day RJ, Heatley F (2001) Conversion of polycarbosilane (PCS) to SiC-based ceramic: Part 1. Characterisation of PCS and curing products. J Mater Sci 36:4037–4043. https://doi.org/10.1023/A:1017942826657
Blinka TA, Helmer BJ, West R (1984) Polarization Transfer NMR Spectroscopy for Silicon-29: The INEPT and DEPT Techniques. Adv Organomet Chem 23:193–218. https://doi.org/10.1016/S0065-3055(08)60611-5
Uhlig F, Marsmann HC (2008) Si NMR some practical aspects. In: Gelest Catalog, Gelest Inc, Morrisville, PA, pp 208–222
Mas’udah K, Diantoro M, (2018) Synthesis and Structural Analysis of Silicon Carbide from Silica Rice Husk and Activated Carbon Using Solid-State Reaction. J Phys Conf Ser 1093:12033. https://doi.org/10.1088/1742-6596/1093/1/012033
Shih C, Tulenko JS, Baney RH (2011) Low-temperature synthesis of silicon carbide inert matrix fuel through a polymer precursor route. J Nucl Mater 409:199–206. https://doi.org/10.1016/j.jnucmat.2010.12.027
Mehr M, Moore DT, Esquivel-Elizondo JR, Nino JC (2015) Mechanical and thermal properties of low temperature sintered silicon carbide using a preceramic polymer as binder. J Mater Sci 50:7000–7009. https://doi.org/10.1007/S10853-015-9252-1
Joni IM, Nulhakim L, Vanitha M (2018) Characteristics of crystalline silica (SiO2) particles prepared by simple solution method using sodium silicate (Na2SiO3) precursor. J Phys Conf Ser 1080:12006. https://doi.org/10.1088/1742-6596/1080/1/012006
Acknowledgements
LJP thanks Sandvik Ltd T/A Kanthal for the award of a PhD studentship.
Funding
This work was supported Sandvik Ltd T/A Kanthal and the Strathclyde Centre for Doctoral Training in Advanced Functional and Engineering Polymers.
Author information
Authors and Affiliations
Contributions
The work reported in this manuscript forms part of the PhD research of the first author, Lewis Print, supervised by John Liggat. Authors LJP, JJL, SM and HS contributed to the study conception and design. Material preparation, data collection and analysis were performed by LJP except for the solid-state NMR data collected by DCA. The first draft of the manuscript was written by LJP and it was commented on by JJL. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Ethics approval
Not applicable.
Consent to participate
Not applicable.
Consent for publication
Consent for publication has been given by Sandvik Ltd T/A Kanthal.
Competing interests
The authors have no relevant financial or non-financial interests to disclose.
Research involving Human Participants and/or Animals
Not applicable.
Informed Consent
Not applicable.
Disclosure of potential conflicts of interest
The authors have no relevant conflicts of interests to disclose.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Print, L.J., Liggat, J.J., Moug, S. et al. A Study of the Ceramicisation of Allylhydridopolycarbosilane by Thermal Volatilisation Analysis and Solid-State Nuclear Magnetic Resonance. Silicon 15, 1355–1379 (2023). https://doi.org/10.1007/s12633-022-02072-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-022-02072-0