Abstract
This paper aims to design and analyze the performance of double gate silicon based MOSFET and then it is utilized to implement multi-input dc–dc converter for dc grid application. Double gate MOSFET is preferred here because of its high drive current ability. A digital controller suitable for a two-input boost-SEPIC dc-dc converter is outlined using the designed MOSFET. The modelling of the converter has been done using state-space analysis followed by the designing of converter energy storage elements and voltage gain expression of the converter system. The Interaction analysis is performed to find the best pairing of the controlled variables using Relative Gain Array, Scaled Gain Matrix, and RGA Number. A decentralized controller is designed using interaction analysis. The robustness of the controllers is verified with parametric uncertainties. The response of the system with decentralized controllers against source voltage and load variations is observed. An experimental prototype of 150 watt with two input source of magnitude 24 V and 36 V is made with designed parameters to test in the laboratory. Finally, the effectiveness of the controller is verified for source and load regulation. The simulation and experimental results are in close agreement, which ensures the robustness of the controller.
Similar content being viewed by others
Data Availability
My manuscript has no associated data.
References
Liu YC, Chen YM (2009) A systematic approach to synthesizing multiple-input dc-dc converter. IEEE Trans Power Electron 24(1):116–127
Tewari VK, Verma A (2021) Two-Loop Controlled Quasi Multiple-Input DC-–DC Converter for Load Voltage and Source Current Management. Trans Electr Electron Mater:1–9
Veerachary M, Tewari VK, Anandh N (2013) Two-input boosting dc-dc converter for dc-grid applications. International conference on green computing, communication and conservation of energy (ICGCE). IEEE, pp 574–579
Wang Z, Luo Q, Wei Y, Mou D, Lu X, Sun P (2020) Topology analysis and review of three-port DC/DC converters. IEEE Trans Power Electron
Jeong Y, Park J-D, Rorrer R, Kim K-W, Lee B-H (2020) A novel multi-input and single-output DC/DC converter for small unmanned aerial vehicle. IEEE applied power electronics conference and exposition (APEC). IEEE, pp 1302–1308
Shan Z, Ding X, Jatskevich J, Chi KT (2020) Synthesis of multi-input multi-output DC/DC converters without energy buffer stages. IEEE Transactions on Circuits and Systems II: Express Briefs 68(2):712–716
Athikkal S (2020) A three input DC-DC converter for hybrid energy application. Int J Electric Engin Technol 11(4)
Zhu B, Hu H, Wang H, Yang L (2020) A multi-input-port bidirectional DC/DC converter for DC microgrid energy storage system applications. Energies 13(11):2810
Chen D, Zeng H (2020) A Buck type multi-input distributed generation system with parallel-timesharing power supply. IEEE Access 8:79958–79968
Singh S, Raj B (2020) Modeling and simulation analysis of SiGe heterojunction double gate vertical t-shaped tunnel FET. Superlattice Microst 142:106496
Amaleswari R, Prabhakar M (2020) Non-isolated multi-input DC-DC converter with current sharing mechanism. Int J Electron:1–27
Singh J, Raj B (2019) Design and investigation of 7T2M-NVSRAM with enhanced stability and temperature impact on store/restore energy. IEEE Trans Very Large Scale Integr (VLSI) Syst 27(6):1322–1328
Silvaco, ATLAS user’S (2018) Manual device. "Simulation Software", vol 444. Silvaco International, Santa Clara CA
Varesi K, Hosseini SH, Sabahi M, Babaei E (2018) Modular non-isolated multi-input high step-up dc-dc converter with reduced normalized voltage stress and component count. IET Power Electron 11(6):1092–1100
Athikkal S (2018) KumaravelSundaramoorthy, and Ashok Sankar. "development and performance analysis of dual-input DC–DC converters for DC microgrid application". IEEJ Trans Electr Electron Eng 13(7):1034–1043
Varesi K (2018) Seyed Hossein Hosseini, Mehran Sabahi, and Ebrahim Babaei. "Modular non-isolated multi-input high step-up dc–dc converter with reduced normalized voltage stress and component count". IET Power Electron 11(6):1092–1100
Singh S, Sharma A, Kumar V, Umar P, Rao AK, Singh AK (2021) Investigation of N+ SiGe juntionless vertical TFET with gate stack for gas sensing application. App Phys A 127(9):1–11
Varesi K, Hosseini SH, Sabahi M, Babaei E (2018) A high-voltage gain non-isolated noncoupled inductor based multi-input DC-DC topology with reduced number of components for renewable energy systems. Int J Circuit Theory App 46(3):505–518
Singh S, Yadav S, Bhalla SK (2021) An Improved Analytical Modeling and Simulation of Gate Stacked Linearly Graded Work Function Vertical TFET. Silicon:1–14
AboReada H, Williamson SS, Sood V (2019) Analysis and control of multi-input, single-output, non-isolated DC/DC converter for effective renewable energy management. IEEE transportation electrification conference and expo (ITEC). IEEE, pp 1–6
Singh S, Raj B (2020) Design and analysis of I ON and Ambipolar current for vertical TFET. Manufacturing engineering. Springer, Singapore, pp 541–559
Veerachary M, Tiwari VK (2014) Power management in dc-grid through two input dc-dc converter. Eighteenth National Power Systems Conference (NPSC). IEEE, pp 1–6
Singh S, Raj B (2021) Analysis of ONOFIC technique using SiGe heterojunction double gate vertical TFET for low power applications. Silicon 13(7):2115–2124
Al-Naseem O, Erickson RW, Carlin P (2000) Prediction of switching loss variations by averaged switch modeling. APEC 2000. Fifteenth annual IEEE applied power electronics conference and exposition (cat. No. 00CH37058), vol 1. IEEE, pp 242–248
Shen Z, John YX, Cheng X, Fu Y, Kumar P (2006) Power MOSFET switching loss analysis: a new insight. Conference record of the 2006 IEEE industry applications conference forty-first IAS annual meeting, vol 3. IEEE, pp 1438–1442
Singh S, Raj B (2021) Analytical and compact modeling analysis of a SiGe hetero-material vertical L-shaped TFET. Silicon:1–11
Peng L, Kang Y, Pei X, Chen J (2007) A novel PWM technique in digital control. IEEE Trans Ind Electron 54(1):338–346
Datasheets of Driver Circuit I.C IR2110 (n.d.) Opto isolator 6N137, Diode MUR 1560, MOSFET IRFP250N
Singh S, Raj B (2020) Analytical modeling and simulation analysis of T-shaped III-V heterojunction vertical T-FET. Superlattice Microst 147:106717
Singh S, Raj B (2019) Design and analysis of a heterojunction vertical t-shaped tunnel field effect transistor. J Electron Mater 48(10):6253–6260
Funding Statement
The author(s) received no financial support for the research, authorship, and/or publication of this article.
Availability of Data and Material
Not applicable.
Author information
Authors and Affiliations
Contributions
All authors have equally participated in the preparing of the manuscript during implementation of ideas, findings result, and writing of the manuscript.
Corresponding author
Ethics declarations
All procedures performed in studies involving human participants were in accordance with the ethical standards.
Consent to Participate
Not applicable.
Consent for Publication
The Author transfers his copyrights to the publisher.
Conflict of Interest
The authors declare that there are no conflicts of interest.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Tewari, V.K., Verma, A. Design and Application of Double-Gate MOSFET in Two Loops Controlled Multi-Input DC-DC Converter. Silicon 14, 7321–7333 (2022). https://doi.org/10.1007/s12633-021-01469-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-021-01469-7