Abstract
The highest activity and selectivity results were achieved in the presence of Mo metal supported by SBA-15. Mo/SBA-15 catalyst was synthesized using the wet impregnation method. Catalysts were characterized using FTIR, XRD, Surface Area Analyzer (SAA), and SEM-EDX. Mo/SBA-15 has pore diameters, surface area, and Mo metal concentration of 561.4 m2/g, 6.53 nm, and 4.41%, respectively. The hydrocracking process was carried out at a temperature of 500 °C with a ratio of catalyst: feed weight 1: 100. The best catalyst for hydrocracking of waste palm cooking oil was Mo/SBA-15. The presence of Mo metal is role play in the hydrocracking process because it can increase the activity and selectivity of the catalyst. In addition, decreased pore diameter and surface area also affect the hydrocracking process. The total liquid product produced by the Mo/SBA-15 catalyst was 53.86 wt.%. The results of the conversion of liquid products analyzed using GC-MS showed a total hydrocarbon compound of 50.35 wt.%. The fraction of gasoline produced was 42.46 wt.% and the fraction of diesel fuel produced was 7.89 wt.%.
Similar content being viewed by others
Data Availability
Data and materials are all available and prepared, authors will be pleased to provide it if requested during the publication process.
References
Lam SS, Mahari WAW, Cheng CK, Omar R, Chong CT, Chase HA (2016) Recovery of diesel-like fuel from waste palm oil by pyrolysis using a microwave heated bed of activated carbon. Energy 115:791–799. https://doi.org/10.1016/j.energy.2016.09.076
Khodadadi MR, Malpartida I, Tsang C, Lin CSK, Len C (2020) Recent advances on the catalytic conversion of waste cooking oil. Mol Catal 494:111128. https://doi.org/10.1016/j.mcat.2020.111128
Lovas P, Hudec P, Hadinová M, Ház A (2015) Use of ZSM-5 catalyst in deoxygenation of waste cooking oil. Chem Zvesti 69(11):1454–1464. https://doi.org/10.1515/chempap-2015-0159
Hidalgo JM, Horaček J, Matoušek L, Vráblik A, Tišler Z, Černý R (2018) Catalytic hydrocracking of vacuum residue and waste cooking oil mixtures. Monatsh Chem. 149:1167-1177. https://doi.org/10.1007/s00706-018-2171-5
Pacheo-Sosa JG, Castillo-Escobeda AI, Chavrria-Hernandez JC, Díaz-Félix MC, Pérez-Vidal H, Ordónez LC, García-Dávila J, Morales-Ortuno JC, Escobar B (2019) Catalytic deoxygenation of stearic acid and waste cooking oil over Pd/ SBA-15 for obtaining hydrocarbons with potential as renewable liquid fuels. J Porous Mater 26:1541-1557. https://doi.org/10.1007/s10934-019-00749-3
Sadrameli SM (2016) Thermal/catalytic cracking of liquid hydrocarbons for the production of olefins: a state-of-the-art review II: Catalytis cracking review. Fuel 173:285–297. https://doi.org/10.1016/j.fuel.2016.01.047
Prado CMR, Filho NRA (2009) Production and characterization of the biofuels obtained by thermal cracking and thermal catalytic cracking of vegetable oils. J Anal Appl Pyrolisis 86:338–347. https://doi.org/10.1016/j.jaap.2009.08.005
Zhao Y, Wang W, Jing X, Gong X, Wen H, Deng Y (2020) Catalytic cracking of polypropylene by using Fe-SBA-15 synthesiezed in an acid-free medium for production of lighy hydrocarbon oils. J Anal Appl Pyrolisis 146:104755. https://doi.org/10.1016/j.jaap.2019.104755
Sriningsih W, Saerodji MG, Trisunaryanti W, Triyono AR, Falah II (2014) Fuel production from LDPE plastic waste over natural zeolite supported Ni, Ni-Mo, co, and co-Mo metals. Procedia Environ Sci 20:215–224. https://doi.org/10.1016/j.proenv.2014.03.028
Zhao X, Wei L, Julson J, Gu Z, Cao Y (2015) Catalytic cracking of inedible camelina oils to hydrocarbon fuels over bifunctional Zn/ZSM-5 catalysts. Korean J Chem Eng 32(8):1528–1541. https://doi.org/10.1007/s11814-015-0028-8
Chumachenko VA, Lavrenov AV, Buluchevskii EA, Arbuzov AB, Gulyaeva TI, Drozdov VA (2016) Hydrocracking of vegetable oil on boron-containing catalyst: effect of the nature and content of a hydrogenation component. Catal Ind 8:56–74. https://doi.org/10.1134/S2070050416010037
Trisunaryanti W, Suarsih E, Triyono FII (2019) Well-dispersed nickel nanoparticles on the external and internal surfaces of SBA-15 for hydrocracking of pyrolyzed α-celluose. RSC Adv 9:1230–1237. https://doi.org/10.1039/c8ra09034c
Restrepo-Garcia JR, Baldovino-Medrano VG, Giraldo SA (2016) Improving the selectivity in hydrocracking of phenathrene over mesoporous Al-SBA-15 based Fe-W catalysts by enhacing mesoporosity and acidity. Appl Catal A Gen 510:98–109. https://doi.org/10.1016/j.apcata.2015.10.051
Li J, Fang X, Bian J, Guo Y, Li C (2018) Microalgae hydrothermal liquefaction and derived biocrude upgrading with modified SBA-15 catalysts. Bioresour Technol 266:541–547. https://doi.org/10.1016/j.biortech
Hidalgo JM, Pineda A, Arancon RAD, Cerny R, Climent MS, Romero AA, Luque R (2015) Continuous-flow Hydroisomerization of C5–C7 alkanes using mechanochemically synthesized supported Pt and Pd–SBA-15 materials. J Flow Chem 5(1):11–16. https://doi.org/10.1556/JFC-D-14-00029
Zhang X, Zhang F, Yan X, Zhang Z, Sun F, Wang Z, Zhao D (2008) Hydrocracking of heavy oil using zeolites Y/AL-SBA-15 composites as catalyst supports. J Porous Mater 15:145–150. https://doi.org/10.1007/s10934-007-9114-6
Qiu S, Zhang Q, Lv W, Wang T, Zhang Q, Ma L (2017) Simply packaging Ni nanoparticles inside SBA-15 channels by co-impregnation for dry reforming of methane. RSC Adv 7:24551–24560. https://doi.org/10.1039/c7ra00149e
Ameen M, Azizan MT, Ramli A, Yusup S, Abdullah A (2020) The effect of metal loading over Ni/γ-Al2O3 and Mo/γ-Al2O3 catalysts on reaction routes of hydrodeoxygenation of rubber seed oil for green diesel production. Catal Today 355:51–64. https://doi.org/10.1016/j.cattod.2019.03.028
Ramesh A, Tamizhdurai P, Krishnan PS, Ponnusamy VK, Sakthinathan S, Shanthi K (2020) Catalytic transformation of non-edible oils to biofuels through hydrodeoxygenation using Mo-Ni/mesoporous alumina-silica catalysts. Fuel 262:116494. https://doi.org/10.1016/j.fuel.2019.116494
Yan L, Kui W, Xuan-lin G, Wei-yan W, Yun-quan Y (2018) A comparison of MoS 2 catalysts hydrothermally synthesized from different sulfur precursors in their morphology and hydrodeoxygenation activity. J Fuel Chem Technol 46(5):535–542. https://doi.org/10.1016/S1872-5813(18)30023-9
Santi D, Trisunaryanti W, Falah II (2020) Hydrocracking of pyrolyzed α-cellulose to hydrocarbon over MxOy/Mesoporous carbon catalyst ( M = co and Mo ): synthesis and characterization of carbon-based catalyst support from saw waste of Merbau. J Environ Chem Eng 8(3):103735. https://doi.org/10.1016/j.jece.2020.103735
Escola JM, Serrano DP, Arroyo M, Alba A (2014) Conversion of LDPE into transportation fuels by a two-stage process using Ni/Al-SBA-15 as catalyst. J Mater Cycles Waste Manag 16:435–441. https://doi.org/10.1007/s10163-014-0249-7
Jiang B, Zhu T, Song H, Li F (2019) Hydrodeoxygenation and hydrodesulfurization over Fe promoted Ni2P/SBA-15 catalyst. J Alloys Compd 806:254–262. https://doi.org/10.1016/j.jallcom.2019.07.242
Barbosa FA, Santos ACB, Silva MIP, Stumbo AM (2004) Resistabce to poisoning by nitrogen compounds of NiMo/Al-MCM-41 hydrocracking catalysts. Catal Today 98:109–113. https://doi.org/10.1016/j.cattod.2004.07.025
Chen L, Hu J, Qi Z, Fang Y, Richards R (2011) Gold nanoparticles intercalated into the walls of mesoporous silica as verssatile redox catalyst. Ind Eng Chem Res 50:13642–16349. https://doi.org/10.1021/ie200606t
Ghosh BK, Hazra S, Naik B, Ghosh NN (2015) Preparation of Cu nanoparticle loaded SBA-15 and their excellent catalytic activity in reduction of variety of dyes. Powder Technol 209:371–378. https://doi.org/10.1016/j.powder.2014.09.027
Dong W, Mansour AN, Dunn B (2001) Structural and electrochemichal properties of amorphous and crystalline molybdenum oxide aerogels. Solid State Ionics 144:31–40. https://doi.org/10.1016/S0167-2738(01)00901-8
Ballesteros-plata D, Infantes-molina A, Rodríguez-castellón E (2019) Study of bifunctionality of Pt / SBA-15 catalysts for HDO of Dibenzofuran reaction : addition of Mo or use of an acidic support. Appl Catal A Gen 580:93–101. https://doi.org/10.1016/j.apcata.2019.05.002
Dhar GM, Kumaran GM, Kumar M, Rawat KS, Sharma LD, Raju BD, Rao KSR (2005) Physico-chemical characterization and catalysis on SBA-15 supported molybdenum hydrotreating catalysts. Catal Today 99:309–314. https://doi.org/10.1016/j.cattod.2004.10.005
Hu Z, Lu S, Huang X, Li J, Duan Y, Yan L Yao Y, Liao X (2018) Molybdenum anchored on NH2-modified spherical SiO2 : A highly efficient and stable catalyst for oxidative desulfurization of fuel oil. Appl Organometal Chem 1–10. https://doi.org/10.1002/aoc.4521
Bukhari SN, Chong CC, Setiabudi HD, Cheng YW, Teh LP, Jalil AA (2021) Ni/fibrous type SBA-15: highly active and coke resistant catalyst for CO2 methanation. Chem Eng Sci 229:116141. https://doi.org/10.1016/j.ces.2020.116141
Yoon S, Choi WC, Park Y, Kim HY, Lee CW (2010) Catalytic hydrocracking of bitumen at mild experimental condition. Korean J Chem 27(1):62–65. https://doi.org/10.1007/s11814-009-0316-2
Peng H, Min L, Qiu-lian C (2020) MoO3/Al-SBA-15 modified catalyst and its application in coal tar hydrocracking. J Fuel Chem Technol 48(9):1079–1086. https://doi.org/10.1016/S1872-5813(20)30072-4
Kusumastuti H, Trisunaryanti W, Falah II, Marsuki MF (2018) Synthesis of mesoporous silica-alumina from lapindo mud as a support of Ni and Mo metals catalysts for hydrocracking of pyrolyzed α-cellulose. Rasayan J Chem 11(2):522–530. https://doi.org/10.7324/RJC.2018.1122061
Zhao X, Wei L, Cheng S, Kadis E, Cao Y, Boakye E, Gu Z, Julson J (2016) Hydroprocessing of carinata oil for hydrocarbon biofuel over Mo-Zn/Al2O3. Applied Catal B, Environ 196:41–49. https://doi.org/10.1016/j.apcatb.2016.05.020
Ooi XY, Gao W, Ong CH, Lee HV, Juan JC, Chen WH, Lee KT (2019) Overview on catalytic deoxygenation for biofuel synthesis using metal oxide supported catalysts. Renew Sust Energ Rev 112:834–852. https://doi.org/10.1016/jrser.2019.06.031
Galadima A, Muraza O (2015) Catalytic upgrading of vegetable oils into jet fuels range hydrocarbons using heterogeneous catalysts : a review. J Ind Eng Chem 29:12–23. https://doi.org/10.1016/j.jiec.2015.03.030
Pongsedana M, Trisunaryanti W, Artanti FW, Falah II, Sutarno (2017) Hydrocracking of waste lubricant into gasoline fraction over CoMo catalyst supported on mesoporous carbon from bovine bone gelatin. Korean J Chem Eng 34:2591–2596. https://doi.org/10.1007/s11814-017-0165-3
Permata ML, Trisunaryanti W, Falah II, Hapsari MT, Fatmawati DA (2020) The effect of nickel content impregnated on zeolite toward catalytic activity and selectivity for hydrotreating of cashew nut shell liquid oil 13(1):772-779. https://doi.org/10.31788/RJC.2020.1315529
Acknowledgements
The authors would like to thank the Ministry of Research, Technology and Higher Education of Indonesia for the financial support through PTM Research Grant under contract number 2037/UN1/DITLIT/DIT-LIT/PT/2020.
Funding
This scientific publication is funded by the Ministry of Research, Technology and Higher Education of Indonesia.
Author information
Authors and Affiliations
Contributions
Gesha Desy Alisha: Investigation, Methodology, Formal analysis, Visualization, Writing – original draft. Wega Trisunaryanti: Conceptualization, Supervision, Resources, Methodology, Writing – review & editing. Akhmad Syoufian: Investigation, Validation.
Corresponding author
Ethics declarations
Consent for Publication
All authors have agreed to submit this manuscript to the Silicon.
Consent to Participate
All authors have made a significant contribution to this manuscript, have seen and approved the final manuscript.
Conflict of Interests
The authors declare that they have no conflict of interest.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Alisha, G.D., Trisunaryanti, W. & Syoufian, A. Hydrocracking of Waste Palm Cooking Oil into Hydrocarbon Compounds over Mo Catalyst Impregnated on SBA-15. Silicon 14, 2309–2315 (2022). https://doi.org/10.1007/s12633-021-01035-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-021-01035-1