Abstract
In this work, a semi-empirical relationship between sandblasting times and the surface roughness is presented. The derived relation is valid for the case where the erosion process does not reach the saturation regime. From the behavior of the optical transmission and the roughness as functions of sandblasting times, three erosion regime stages have been identified, and approximate limits for each regime have been established. The Weibull analysis as applied to the size defects’ distribution has revealed that the Weibull plots showed various distribution types corresponding to the three identified regimes. This result agrees well with microscopic observations of the damaged surface.
Similar content being viewed by others
References
Benterki S, Faci A, Bouaouadja N (2020) A windshields surface characterization damaged by sandblasting. Int J Appl Glass Sci. https://doi.org/10.1111/ijag.14584
Evans AG, Gulden ME, Rosenblatt M (1978) Impact damage in brittle materials in the elastic–plastic response regime. Proc R Soc Lond Ser A 361:343–365
Marshall DB, Lawn BR, Evans AG (1982) Elastic/plastic indentation damage in ceramic: The lateral crack system. J Am Ceram Soc. https://doi.org/10.1111/j.1151-2916.1982.tb10782.x
Buijs M, Martens L (1992) Effect of indentation interaction on cracking. J Am Ceram Soc. https://doi.org/10.1111/j.1151-2916.1992.tb05509.x
Dunaev AA, Kireenko MF, Pesina TI, Tikhonova LV, Chmel AE, Shcherbakov IP (2019) Light and sound emission from inpact-damaged ZnS and ZnSe ceramics. Glass Ceram. https://doi.org/10.1007/s10717-019-00117-2
Adjouadi N, Laouar N, Bousbaa C, Bouaouadja N, Fantozzi G (2007) Study of light scattering on a soda-lime glass eroded by sandblasting. J Eur Ceram Soc 27:3221–3229
Benterki S, Bousbaa C, Laouar N, Faci A (2018) Characterization of the sandblasted glass degradation by light scattering. Optik. https://doi.org/10.1016/j.ijleo.2017.12.137
Jha P, Singh K (2016) Effect of field strength and electro-negativity of cao and mgo on structural and optical properties of sio2–k2o-cao-mgo glasses. Silicon. https://doi.org/10.1007/s12633-015-9307-6
Khalil EMA, Youness RA, Amer MS, Taha MA (2018) Mechanical properties, in vitro and in vivo bioactivity assessment of Na2OCaO-P2O5-B2O3-SiO2 glass-ceramics. Ceram Int. https://doi.org/10.1016/j.ceramint.2018.01.222
Youness RA, Taha MA, El-Kheshen A, Ibrahim M (2018) Influence of the addition of carbonated hydroxyapatite and selenium dioxide on mechanical properties and in vitro bioactivity of borosilicate inert glass. Ceram Int. https://doi.org/10.1016/j.ceramint.2018.08.061
Youness RA, Taha MA, Ibrahim M, El-Kheshen A (2018) FTIR spectral characterization, mechanical and antimicrobial properties of la-doped phosphate-based bioactive glasses. Silicon. https://doi.org/10.1007/s12633-017-9587-0
Youness RA, Taha MA, El-Kheshen A, El-Faramawy N, Ibrahim M (2019) In vitro bioactivity evaluation, antimicrobial behavior and mechanical properties of cerium-containing phosphate glasses. Mater Res Express. https://doi.org/10.1088/2053-1591/AB15B5
Laouamri H, Giljean S, Arnold G, Kolli M, Bouaouadja N, Tuilier M (2016) Roughness influence on the optical properties and scratch behavior of acrylic coating deposited on sandblasted glass. Prog org Coat. https://doi.org/10.1016/j.porgcoat.2016.09.014
Faci A, Benterki S, Bouaouadja N (2020) Effect of sandblasting defects distribution on the mechanical strength of a soda-lime glass. J Aust Ceram Soc. https://doi.org/10.1007/s41779-019-00444-1
Ayadi A, Bouaouadja N, Duran A, Castro Y (2020) Hybrid SiO2–ZrO2 coatings for restoring and repairing glasses damaged by sandblasting. Ceram Int. https://doi.org/10.1016/j.ceramint.2020.01.067
Ballout Y, Mathis JA, Talia JE (1996) Solid particle erosion mechanism in glass. Wear. https://doi.org/10.1016/0043-1648(96)06922-06920
Slikkerveer PJ, Bouten PCP, Veld FH, Scholten H (1998) Erosion and damage by sharp particles. Wear 217(2):237–250
Jafar RHM, Papini M, Spelt JK (2013) Simulation of erosive smoothing in the abrasive jet micro-machining of glass. J Mater Process Technol. https://doi.org/10.1016/j.jmatprotec.2013.06.022
Karim M, Naamane S, Delord C, Bennouna A (2015) Laboratory simulation of the surface erosion of solar glass mirrors. Sol Energy. https://doi.org/10.1016/j.solener.2015.05.044
Jiang Q, Ismail J, Zaîri F, Qu Z, Naît-Abdelaziz M, Azari Z, Liu X (2017) Damage interaction and angle effects on the erosion behavior of soda-lime-silica glass. Int J Damage Mech. https://doi.org/10.1177/1056789517747664
Lakhdari F, Belkhir N, Bouzid D, Herold V (2018) Relationship between subsurface damage depth and breaking strength for brittle materials. Int J Adv Manuf Tech. https://doi.org/10.1007/s00170-018-03284-8
Benterki S, Laouar N, Bousbaa C, Bouras N, Bouaouadja N (2012) Influence of the angle of illumination on light scattering by sandblasted soda–lime–silica glass. Glass Technol 53:53–59
DIN 50332 (1984) Strahlverschleiβprufung (Ray of schleiβ test). DIN, Berlin
ASTM G76–89 (1992) Standard practice for conducting erosion tests by solid-particle impingement using gas jets. ASTM, Philadelphia
Kolli M, Hamidouche M, Bouaouadja N, Fantozzi G (2009) HF etching effect on sandblasted soda-lime glass properties. J Eur Ceram Soc. https://doi.org/10.1016/j.jeurceramsoc.2009.03.020
Ritter JE, Strezepa P, Jakus K, Rosenfeld L, Beckman KJ (1984) Erosion damage in glass and alumina. J Am Ceram Soc 67:769–774
Ismail J, Zairi F, Nait-Abdelaziz M, Bouzid S, Azari Z (2011) Experimental and numerical investigations on erosion damage in glass by impact of small-sized particles. Wear. https://doi.org/10.1016/j.wear.2011.03.009
Barka B, Faci A, Bouaouadja N, Bousbaa C, Benachour D, Fatmi M (2018) Influence of the velocity and impact angle on the distribution of the surface defects of a sandblasted glass. Int J Appl Glass Sci https://doi.org/10.1111/ijag.12349
Nyougué A, Bouzid S, Dossou E, Azari Z (2016) Fracture characterisation of float glass under static and dynamicloading. J Asian Ceram Soc. https://doi.org/10.1016/j.jascer.2016.07.004
Trustrum K, Jayatilaka A (1979) On estimating the modulus for a brittle material. J Mater Sci 14:1080–1084
Ramesh Kumar C, Omkumar M (2018) Optimization of process parameters of chemical mechanical polishing of soda lime glass. Silicon. https://doi.org/10.1007/s12633-018-9903-3
Savaete B (2003) Vitrage automobile. Verre 9:36–48
Acknowledgements
The authors acknowledge the support from the Directorate-General for Scientific Research and Technological Development (DGRSDT-Algeria).
Author information
Authors and Affiliations
Contributions
Not applicable.
Corresponding author
Ethics declarations
Not applicable.
Conflict of Interest
The authors declare that they have no conflicts of interest.
Consent to Participate
Not applicable.
Consent for Publication
Not applicable.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Benterki, S., Faci, A. & Bousbaa, C. Erosion Regimes Characterization of Soda-Lime Glass. Silicon 14, 2033–2038 (2022). https://doi.org/10.1007/s12633-021-00991-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-021-00991-y