Abstract
Sodium hexa-fluorosilicate (Na2SiF6) is a synthetic inorganic material with distinguished chemical, thermal and optical properties. In this research, a pure sodium hexa-fluorosilicate sample was systematically investigated via various characterization techniques. The amounts of constitutional elements and impurities were investigated using X-ray fluorescence and the chemical purity was determined as 99.89 wt%. Physical properties were calculated as 2.7085 g/cm3 for density, 0.98 m2/g for specific surface area and a mean particle size (D50) of 77.3 μm. Thermal analysis was applied to understand the degradation of Na2SiF6 till 900 °C. The mineral composition and morphology was studied using X-ray diffraction, scanning and transmission electron microscopy and revealed the existence of P321 type hexagonal structure associated by elongated prism shaped precipitated crystals. Spectroscopy studies were performed via different techniques at different ranges of measurement. Thermal stability was investigated by post-mortem phase analysis of heat treated Na2SiF6 samples and showed a well stability till 400 °C. It is proposed that the thermal dissociation of Na2SiF6 can be utilized as a facile, inexpensive and green way for the synthesis of sodium fluoride instead of routine hydrofluoric acid-based methods. The obtained results suggested that the examined sodium hexa-fluorosilicate material could potentially be used as a reliable precursor in the synthesis of fluoride and silicon based materials due to its acceptable physical properties, chemical purity and thermal behavior.
Similar content being viewed by others
References
Lacson CFZ, Lu MC, Huang YH (2020) Fluoride network and circular economy as potential model for sustainable development - a review. Chemosphere 239:124662
Peresypkina EV, Blatov VA (2003) Structure-forming components in crystals of ternary and quaternary 3d-metal complex fluorides. Acta Cryst B59:361–377
Kumar M, Babu MN, Mankhand TR, Pandey BD (2010) Precipitation of sodium silicofluoride (Na2SiF6) and cryolite (Na3AlF6) from HF/HCl leach liquors of alumino-silicates. Hydrometallurgy 104:304–307
Toure AO, Sambe FM, Koita D, Diop CMG, Sock O (2012) Processes for working-up an aqueous fluosilicic acid solution. S Afr J Sci 108:1–5
Jeong HL, Huh YD (2010) Synthesis of hexagonal prisms and hexagonal plates of Na2SiF6 microcrystals. Mater Lett 64:1816–1818
Olchowka J, Suta M, Wickleder C (2017) Green synthesis of A2SiF6 (a=Li-Cs) nanoparticles using ionic liquids as solvents and as fluorine sources: a simple approach without HF. Chem Eur J 23:12092–12095
Barve RA, Patil RR, Moharil SV, Bhatt BC, Kulkarni MS (2016) Effect of Al3+ co-doping on the luminescence properties of cu doped Na2SiF6. Appl Radiat Isotopes 116:57–62
Krylov VA, Sorochkina TG, Bulanov AD, Lashkov AY (2012) C1-C4 hydrocarbon release in the preparation of SiF4 through Na2SiF6 pyrolysis. Inorg Mater 48:7–9
Valbe R, Maeorg U, Lohmus A, Reedo V, Koel M, Krumme A, Kessler V, Hoop A, Romanov AE (2012) A novel route of synthesis of sodium hexa fluorosilicate two component cluster crystals using BF4− containing ionic liquids. J Cryst Growth 361:51–56
Mukhamedyanov MM, Plotnikov IA (2014) Use of a chloroform by-product in raw fur and hide dressing processes. Russ Agric Sci 40:295–297
Wang H, Mao Q, Gao Y, Wang Z, Cui S (2017) Effect and mechanism of sodium fluosilicate on setting time of cement. Mater Sci Forum 898:1978–1983
Ren Z, Yu F, Gao H, Chen Z, Peng Y, Liu L (2017) Selective separation of fluorite, barite and calcite with valonea extract and sodium fluosilicate as depressants. Minerals 7:24
Rice CR, Slater C, Faulkner RA, Allan RL (2018) Self-assembly of an anion-binding cryptand for the selective encapsulation, sequestration, and precipitation of phosphate from aqueous systems. Angew Chem Int Ed 57:13071–13075
Natali M, Nastasi F, Puntoriero F, Sartorel A (2019) Mechanistic insights into light-activated catalysis for water oxidation. Eur J Inorg Chem 15:2027–2039
Cai Z, Li Y, Tian W (2011) Electrochemical behavior of silicon compound in LiF-NaF-KF-Na2SiF6 molten salt. Ionics 17:821–826
Chen G, Zhu S, Jiang Z, Gao L, Ma Z, Liu L (2017) Laser ablation protection of polymer matrix composites by adhesive inorganic coatings. J Mater Sci 52:12734–12741
Wiankowska KK, Lipa S, Krasowski M, Sokołowski J, Butkiewicz KL, Nowicka A (2020) Evaluation of gap formation at the composite resin-tooth interface after using universal adhesives: in vitro SEM study using the replica technique. Microsc Res Tech 83:176–185
Shakhrai SG, Mikhalev YG, Kalinovskaya TG, Arkhipov GV, Ivanova AM (2016) Investigation and choice of materials for the electrical insulation of the steel bloom of an aluminum electrolyzer. Metallurgist 60:622–628
Spomer N, Holl S, Zherlitsyna L, Maysamy F, Frost A, Auner N (2015) Amorphous silicon: new insights into an old material. Chem Eur J 21:5600–5616
Frçhlich P, Lorenz T, Martin G, Brett B, Bertau M (2017) Valuable metals-recovery processes, current trends, and recycling strategies. Angew Chem Int Ed 56:2544–2580
Rehman ZU, Koo BH (2016) Combined effect of long processing time and Na2SiF6 on the properties of PEO coatings formed on AZ91D. J Mater Eng Perform 25:3531–3537
Vasconcelos HCSPM, Gonçalves MC (2016) Overall aspects of non-traditional glasses: synthesis, properties and applications. Bentham Sci Publishers:39–65
Khan MS, Shahzadi P, Alam S, Javed K, Shaheen F, Naqvi J, Shahnaz A (2015) Development of heat resistant borosilicate glass doped with sodium silico fluoride compound. J Chem Mater Res 4:13–18
Kassem AS, Mostafa MZ, Abadir MF, Sherbiny SAE (2010) Hot water acid-resistant enamels for sheet steel. Mater Corrosion 61:58–63
Hui X, Gui L, Feng CJ, Ping LW (2014) Recovery of high specific area silica and sodium fluoride from sodium hexafluorosilicate. J Cent South Univ 21:4084–4090
Cruz ALL, Canul MIP (2007) In situ synthesis of Si3N4 in the Na2SiF6-N2 system via CVD: kinetics and mechanism of solid-precursor decomposition. Solid State Ionics 177:3529–3536
Haddaji Y, Majdoubi H, Mansouri S, Tamraoui Y, Boulif R, Oumam M, Hannache H (2020) Effect of sodium hexafluorosilicate addition on the properties of metakaolin based geopolymers cured at ambient temperature. Silicon. https://doi.org/10.1007/s12633-020-00536-9
Zhang W, Jing Q, Fang Y, Chen Z (2017) Synthesis, structure and properties of nonlinear optical crystal Na2SiF6. Z Anorg Allg Chem 643:1739–1743
Ha J, Novitskaya E, Lam N, Sanchez M, Kim YH, Li Z, Im WB, Graeve OA, McKittrick J (2020) Synthesis of Mn4+ activated Na2SiF6 red-emitting phosphors using an ionic liquid. J Lumin 218:116835
Liu Y, Li Y, Meng J, Liang W, Huang W, Liao S, Huang Y, Zhang H (2020) Novel luminescence enhancement and splitting of excitation and emission bands of Na2SiF6:Mn4+,Li+ phosphors induced by Li+ co-doping. J Lumin 217:116770
Tiwari A, Dhoble SJ (2019) Tunable lanthanide/transition metal ion-doped novel phosphors for possible application in w-LEDs: a review. Lumin 1-30
Zhao JY, Wang XG (2019) Preparation, structure and luminescent performance of Na2SiF6:Re3+(Re3+=Eu3+, Tb3+,Ce3+) powders. Appl Phys A Mater Sci Process 125:178
Luo X, Hou Z, Zhou T, Xie RJ (2020) A universal HF-free synthetic method to highly efficient narrowband red-emitting A2XF6:Mn4+ (a = K, Na, Rb, Cs; X = Si, Ge, Ti) phosphors. J Am Ceram Soc 103:1018–1026
Yeo BE, Cho YS, Huh YD (2016) Synthesis and photoluminescence properties of a red-emitting phosphor, K2SiF6:Mn4+, for use in three-band white LED applications. Opt Mater 51:50–55
Jenkins R, Snyder RL (2012) Introduction to X-ray powder Diffractometry2nd edn. John Wiley & Sons, New York
Arianpour F, Cakir Arianpour A, Aali B (2019) Chemical and surface properties of sodium silicofluoride. 2nd international conference on materials science, mechanical and automotive engineering and technology (IMSMATEC’19), Cappadocia, Turkey, June 1165-7
Chang SY, Wang C, Sun CC (2019) Relationship between hydrate stability and accuracy of true density measured by helium pycnometry. Int J Pharm 567:118444
Buchwald T, Schmandra G, Schützenmeister L, Fraszczak T, Mütze T, Peuker U (2020) Gaseous flow through coarse granular beds: the role of specific surface area. Powder Technol 366:821–831
Li H, Li J, Bodycomb J, Patience GS (2019) Experimental methods in chemical engineering: particle size distribution by laser diffraction-PSD. Canadian J Chem Eng 97:2577–2577
Kashiwaya Y, Cramb AW (2002) Kinetics of formation and dissociation of Na2SiF6. Metall Mater Trans B Process Metall Mater Process Sci 33B:129–136
Cakir Arianpour A, Arianpour F, Aali B (2020) Microstructural study and thermal behavior of sodium silicofluoride. Int J Eng Res Develop (IJERAD) 12:113–117
Soltani N, Canul MIP, Gonzalez LA, Bahrami A (2016) Mechanism and parameters controlling the decomposition kinetics of Na2SiF6 powder to SiF4. Int J Chem Kinetic 48:379–395
Zalkin A, Forrester JD, Templeton DH (1964) The crystal structure of sodium fluosilicate. Acta Cryst 17:1408–1412
Liu J, Du N, Wu P, Wang J, Zhang H, Yang D (2012) Large-scale synthesis of water-soluble Na2SiF6 nanotubes with polyacrylic acid as a surfactant. Mater Res Bull 47:3923–3926
Zhigadl ND (2014) Crystal growth of hexagonal boron nitride (hBN) from mg-B-N solvent system under high pressure. J Cryst Growth 402:308–311
Rane AV, Kanny K, Abitha VK, Thomas S (2018) Methods for synthesis of nanoparticles and fabrication of nanocomposites. Synthesis of Inorganic Nanomaterials: Advances and Key Technologies, Elsevier 121–139
Acknowledgments
This work was supported by Scientific Research Project Coordination Unit of Kastamonu University (grant number KÜ-BAP01/2018-46).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Arianpour, F., Arianpour, A.Ç. & Aali, B. Characterization and Properties of Sodium Hexa-Fluorosilicate and its Potential Application in the Production of Sodium Fluoride. Silicon 13, 4381–4389 (2021). https://doi.org/10.1007/s12633-020-00755-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-020-00755-0