Skip to main content
SpringerLink
Log in

Role of POSS as Coupling Agent for DGEBA/GF Reinforced Nanocomposites

  • Original Paper
  • Published:
Silicon Aims and scope Submit manuscript

Abstract

In the present study a DGEBA based epoxy resin and glass fiber (GF) [70:30] combination was reinforced with different weight percentages (0.5, 1.0 and 1.5 wt%) of POSS (polyhedral oligomeric silsesquioxane) and cured with polyamidoimidazoline curing agent (Aradur 140) at room temperature. The amine functionalized POSS was synthesized via an ONPS (octa(nitrophenyl)silsesquioxane) intermediate. The structural evidence of POSS was confirmed by FTIR and 1H NMR spectroscopic techniques. Varying weight percentages of amine functionalized POSS were incorporated into DGEBA/GF to increase the thermal, thermo-mechanical and mechanical and dielectric properties of DGEBA/GF epoxy nanocomposites, which are investigated by means of dynamic mechanical analysis (DMA), thermo-gravimetric analysis (TGA) and impedance analyzer. The surface roughness behavior of DGEBA, DGEBA/GF composite and DGEBA/GF/POSS epoxy nanocomposites was analyzed by scanning electron microscopy (SEM). The obtained results indicate that enhancement in thermal and thermo-mechanical behaviour of DGEBA/GF was achieved by means of optimum addition of 1.5 wt% of POSS nanoreinforcement, which prevented phase segregation between GF and DGEBA epoxy resin, leading to a significant improvement in mechanical, thermal, thermo-mechanical and dielectric properties in comparison with those of DGEBA/GF composite and neat DGEBA epoxy matrices.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Explore related subjects

Discover the latest articles, news and stories from top researchers in related subjects.

References

  1. Gutman I, Hartings R, Matsuoka R, Konda K (1997) Experience with IEC 1109 1000h salt fog ageing test for composite insulators. IEEE Electr Insul Mag 13:36–39

    Article  Google Scholar 

  2. Choy J, Yee AF, Line RM (2004) Toughening of Cubic Silsesquioxane Epoxy Nanocomposites Using Core −Shell Rubber Particles: A Three-Component Hybrid System. Macromolecules 37:3267–3276

    Article  Google Scholar 

  3. Hao YS, Liu FC, Shi HW, Han EH, Wang ZY (2011) The influence of ultra-fine glass fibers on the mechanical and anticorrosion properties of epoxy coatings. Prog Org Coat 71:188–197

    Article  CAS  Google Scholar 

  4. Duraibabu D, Madhumitha V, Alagar M, Ananda kumar S, Abhinandan S (2014) Development and characterization of a novel skeletal modified tetraglycidyl epoxy toughened DGEBA epoxy matrices. Polym Sci Ser A 56:480–487

    Article  CAS  Google Scholar 

  5. Hameed N, Sreekumar PA, Francis B, Yang W, Thomas S (2007) Morphology, dynamic mechanical and thermal studies on poly (styrene-co-acrylonitrile) modified epoxy resin/glass fibre composites. Compos Part A 38:2422–2432

    Article  Google Scholar 

  6. Kaynak C, Arikan A, Tincer T (2003) Flexibility improvement of short glass fiber reinforced epoxy by using a liquid elastomer. Polymer 44:2433–2439

    Article  CAS  Google Scholar 

  7. Pascault JP, Williams RJJ (2000). In: Paul D R, Bucknall C B (eds), vol 1. Wiley-Interscience, New York, pp 379–415

  8. Reiw CK (1981) Amine Terminated Reactive Liquid Polymers; Modification of Thermoset Resins. Rubber Chem Technol 54:374–402

    Article  Google Scholar 

  9. Choi J, Yee AF, Laine RM (2004) Toughening of Cubic Silsesquioxane Epoxy Nanocomposites Using Core −Shell Rubber Particles: A Three-Component Hybrid System. Macromolecules 37:3267–3276

    Article  CAS  Google Scholar 

  10. Goertzen WK, Kessler MR (2007) Dynamic mechanical analysis of carbon/epoxy composites for structural pipeline repair. Compos Part B 38:1–9

    Article  Google Scholar 

  11. Shan Y, Liao K (2001) Environmental fatigue of unidirectional glass-carbon fiber reinforced hybrid composite. Compos Part B 32:355–363

    Article  Google Scholar 

  12. Tsotsis TK, Keller S, Le K, Bardisc J, Bishd J (2001) Aging of polymeric composite specimens for 5000 h at elevated pressure and temperature. Compos Sci Technol 61:75–86

    Article  CAS  Google Scholar 

  13. Wei B, Cao H, Song S (2011) Degradation of basalt fibre and glass fibre/epoxy resin composites in seawater. Corros Sci 53:426–431

    Article  CAS  Google Scholar 

  14. Sanchez C, Julian B, Belleville P, Popall M (2005) Applications of hybrid organic– inorganic nanocomposites. J Mater Chem 15:3559–3592

    Article  CAS  Google Scholar 

  15. Tanahashi M (2010) Development of Fabrication Methods of Filler/Polymer Nanocomposites: With Focus on imple Melt-Compounding-Based Approach without Surface Modification of Nanofillers. Materials 3:1593–1619

    Article  CAS  Google Scholar 

  16. Huang JC, He CB, Xiao Y, Mya KY, Dai J, Siow YP (2004) Thermomechanical properties of polyimide-epoxy nanocomposites from cubic silsesquioxane epoxides. J Mater Chem 14:2858–2863

    Article  CAS  Google Scholar 

  17. Huang JC, He CB, Xiao Y, Mya KY, Dai J, Siow YP (2002) Polyimide/POSS nanocomposites: interfacial interaction, thermal properties and mechanical properties. Polymer 44:4491–4499

    Article  Google Scholar 

  18. Tamaki R, Tanaka Y, Asuncion MZ, Choi J, Laine RM (2001) Octa(aminophenyl) silsesquioxane as a Nanoconstruction Site. J Am Chem Soc 123:12416–12417

    Article  CAS  Google Scholar 

  19. Nagendiran S, Alagar M, Hamerton I (2010) Octasilsesquioxane reinforced DGEBA and TGDDM epoxy nanocomposites: Characterization of thermal, dielectric and morphological properties. Acta Mater 58:3345–3356

    Article  CAS  Google Scholar 

  20. Abd Rashid ES, Ariffin K, Choong Kooi C, Md Akil H (2009) Preparation and properties of POSS/epoxy composites for electronic packaging applications. Mater Des 30:1–8

    Article  Google Scholar 

  21. Joseph PV, Mathew G, Joseph K, Groeninckx G, Thomas S (2003) Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites. Compos Part A 34:275–290

    Article  Google Scholar 

  22. Kidane AG, Burriesci G, Edirisinghe M, Ghanbari H, Bonhoeffer P, Seifalian AM (2009) A novel nanocomposite polymer for development of synthetic heart valve leaflets. Acta Biomater 5:2409–2417

    Article  CAS  Google Scholar 

  23. Chung HS, Yi PC, Chih CT (2010) Preparation, characterization and thermal properties of organic–inorganic composites involving epoxy and polyhedral oligomeric silsesquioxane (POSS). J Polym Res 17:673–681

    Article  Google Scholar 

  24. Ni Y, Zheng S, Nie K (2004) Morphology and thermal properties of inorganic–organic hybrids involving epoxy resin and polyhedral oligomeric silsesquioxanes. Polymer 45:5557–5568

    Article  CAS  Google Scholar 

  25. Joseph PV, Joseph K, Thomas S (1999) Effect of processing variables on the mechanical properties of sisal-fiber reinforced polypropylene composites. Compos Sci Technol 59:1625– 1640

    Article  CAS  Google Scholar 

  26. Xiao F, Sun Y, Xiu Y, Wong CP (2007) Preparation, thermal and mechanical properties of POSS epoxy hybrid composites. J Appl Polym Sci 104:2113–2121

    Article  CAS  Google Scholar 

  27. Zhang Z, Liang G, Wang X (2007) The effect of POSS on the thermal properties of epoxy. Polym Bull 58:1013–1020

    Article  CAS  Google Scholar 

  28. Zhang Z, Liang G, Wang J, Ren P (2007) Epoxy/POSS organic–inorganic hybrids: viscoelastic, mechanical properties and micromorphologies. Polym Composite 28: 175-:179

  29. Fu HK, Huang CF, Kuo SW, Lin HC, Yei R, Chang FC (2008) Effect of an organically modified nanoclay on low-surface-energy materials of polybenzoxazine. Macromol Rapid Comm 29:1216–1220

    Article  CAS  Google Scholar 

  30. Li L, Li X, Yang R (2012) Thermal Properties, and Flame Retardancy of PC/Ultrafine Octaphenyl-POSS Composites. J Appl Polym Sci 124:3807–3814

    Article  CAS  Google Scholar 

  31. Kuo SW, Chang FC (2011) POSS related polymer nanocomposites. Prog Polym Sci 36:1649–1696

    Article  CAS  Google Scholar 

  32. Zhang W, Müller A H E (2013) Architecture, self-assembly and properties of well-defined hybrid polymers based on polyhedral oligomericsilsequioxane (POSS). Prog Polym Sci 38:1121–1162

    Article  CAS  Google Scholar 

  33. Sasi kumar R, Alagar M (2015) Dielectric and thermal behaviors of POSS reinforced polyurethane based polybenzoxazine nanocomposites. RSC Adv 5:33008–33015

    Article  CAS  Google Scholar 

  34. Wang X, Song L, Pornwannchai W, Hu Y, Kandola B (2013) The effect of graphene presence in flame retarded epoxy resin matrix on the mechanical and flammability properties of glass fiber-reinforced composites. Compos Part A 53:88–96

    Article  CAS  Google Scholar 

Download references

Acknowledgments

Instrumentation facility provided under FIST-DST and DRSUGC to Department of Chemistry, Anna University, Chennai is gratefully acknowledged. The authors also thank CTDT Anna University for having sponsored this project.

Author information

Authors and Affiliations

  1. Department of Chemistry, Anna University, Chennai, 600025, India

    Duraibabu Dhanapal & Ananda Kumar Srinivasan

  2. Department of Textile Technology, Anna University, Chennai, 600025, India

    Neelakandan Ramalingam

Authors
  1. Duraibabu Dhanapal
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ananda Kumar Srinivasan
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Neelakandan Ramalingam
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ananda Kumar Srinivasan.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Dhanapal, D., Srinivasan, A.K. & Ramalingam, N. Role of POSS as Coupling Agent for DGEBA/GF Reinforced Nanocomposites. Silicon 10, 537–546 (2018). https://doi.org/10.1007/s12633-016-9487-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12633-016-9487-8

Keywords

Search

Navigation