![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12614-023-1300-7/MediaObjects/12614_2023_1300_Fig2_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12614-023-1300-7/MediaObjects/12614_2023_1300_Fig3_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12614-023-1300-7/MediaObjects/12614_2023_1300_Fig4_HTML.jpg)
Literatur
Rosentritt M, Kieschnick A, Stawarczyk B (2020) Werkstoffkunde-Kompendium. Polymerbasierte Materialien für die subtraktive CAD/CAM-Fertigung. https://werkstoffkunde-kompendium.de
Rosentritt M, Kieschnick A, Stawarczyk B (2018) Polymerbasierte CAD/CAM-Werkstoffe, 1. Aufl (ebook). https://www.quintessence-publishing.com.. Zugegriffen 17. Sept. 2023
Goujat A, Abouelleil H, Colon P et al (2018) Mechanical properties and internal fit of 4 CAD-CAM block materials. J Prosthet Dent 119:384-389
Güth J-F, Erdelt K, Keul C et al (2020) In vivo wear of CAD-CAM composite versus lithium disilicate full coverage first-molar restorations: a pilot study over 2 years. Clin Oral Investig 24:4301-4311
Burian G, Erdelt K, Schweiger J et al (2021) In-vivo-wear in composite and ceramic full mouth rehabilitations over 3 years. Sci Rep 11:14056
Schlichting LH, Resende TH, Reis KR et al (2022) Ultrathin CAD-CAM glass-ceramic and composite resin occlusal veneers for the treatment of severe dental erosion: an up to 3-year randomized clinical trial. J Prosthet Dent 128:158.e1-158.e12
Zimmermann M, Koller C, Reymus M et al (2018) Clinical evaluation of indirect particle-filled composite resin CAD/CAM partial crowns after 24 months. J Prosthodont 27:694-699
Tokunaga J, Ikeda H, Nagamatsu Y et al (2022) Wear of polymer-infiltrated ceramic network materials against enamel. Materials (Basel) 15:2435
Ikeda H, Nagamatsu Y, Shimizu H (2019) Preparation of silica-poly(methyl methacrylate) composite with a nanoscale dual-network structure and hardness comparable to human enamel. Dent Mater 35:893-899
Coldea A, Swain MV, Thiel N (2013) Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 29:419-426
Facenda JC, Borba M, Corazza PH (2018) A literature review on the new polymer-infiltrated ceramic-network material (PICN). J Esthet Restor Dent 30:281-286
Furtado de Mendonca A, Shahmoradi M, Gouvêa CVD de et al (2019) Microstructural and mechanical characterization of CAD/CAM materials for monolithic dental restorations. J Prosthodont 28:e587-e594
Della Bona A, Corazza PH, Zhang Y (2014) Characterization of a polymer-infiltrated ceramic-network material. Dent Mater 30:564-569
Oudkerk J, Eldafrawy M, Bekaert S et al (2020) The one-step no-prep approach for full-mouth rehabilitation of worn dentition using PICN CAD-CAM restorations: 2-yr results of a prospective clinical study. J Dent 92:103245
Spitznagel FA, Scholz KJ, Strub JR et al (2018) Polymer-infiltrated ceramic CAD/CAM inlays and partial coverage restorations: 3-year results of a prospective clinical study over 5 years. Clin Oral Investig 22:1973-1983
Spitznagel FA, Scholz KJ, Vach K, Gierthmuehlen PC (2020) Monolithic polymer-infiltrated ceramic network CAD/CAM single crowns: three-year mid-term results of a prospective clinical study. Int J Prosthodont 33:160-168
Aini T, Güth J-F, Görl S (2022) Von der Schiene zum Zahnersatz. Quintessenz 73:478-484
Edelhoff D, Beuer F, Schweiger J et al (2012) CAD/CAM-generated high-density polymer restorations for the pretreatment of complex cases: a case report. Quintessence Int 43:457-467
Edelhoff D, Schweiger J, Prandtner O et al (2017) CAD/CAM splints for the functional and esthetic evaluation of newly defined occlusal dimensions. Quintessence Int 48:181-191
Liebermann A, Schweiger J, Edelhoff D, Schwerin C (2021) Innovative tooth-colored CAD/CAM polycarbonate splint design for prosthetic rehabilitation of a young ectodermal dysplasia patient with permanent tooth aplasia. Quintessence Int 52:694-704
Aini T, Güth J-F, Görl S (2022) The Munich splint - more than „just“ function? J Craniomand Func 14:99-114
El-Sabbagh B, Gutmann P, Holzrichter H et al (2022) Zahnersatz aus dem 3D-Drucker. DFZ 66:78-83
Kumar N, Sangi L (2014) Water sorption, solubility, and resultant change in strength among three resin-based dental composites. J Investig Clin Dent 5:144-150
Keul C, Müller-Hahl M, Eichberger M et al (2014) Impact of different adhesives on work of adhesion between CAD/CAM polymers and resin composite cements. J Dent 42:1105-1114
Reymus M, Roos M, Eichberger M et al (2019) Bonding to new CAD/CAM resin composites: influence of air abrasion and conditioning agents as pretreatment strategy. Clin Oral Investig; 23:529-538
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aini, T., Herguth, P. & Güth, JF. Polymere in der modernen Prothetik. DFZ 68, 60–67 (2024). https://doi.org/10.1007/s12614-023-1300-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12614-023-1300-7