Abstract
Ni–Cr enrichment on stainless steel SS316L resulting from chemical activation enabled the deposition of carbon by spraying a stable suspension of carbon nanoparticles; trace Ag was deposited in situ to prepare a thin continuous Ag-doped carbon film on a porous carbon-coated SS316L substrate. The corrosion resistance of this film in 0.5 mol·L−1 H2SO4 solution containing 5 ppm F− at 80°C was investigated using polarization tests. The results showed that the surface treatment of the SS316L strongly affected the adhesion of the carbon coating to the stainless steel. Compared to the bare SS316L, the Ag-doped carbon-coated SS316L bipolar plate was remarkably more stable in both the anode and cathode environments of proton exchange membrane fuel cell (PEMFC) and the interface contact resistance between the specimen and Toray 060 carbon paper was reduced from 333.0 mΩ·cm2 to 21.6 mΩ·cm2 at a compaction pressure of 1.2 MPa.
Similar content being viewed by others
References
Y. Wang and D. O. Northwood, Effects of O2 and H2 on the corrosion of SS316L metallic bipolar plate materials in simulated anode and cathode environments of PEM fuel cells, Electrochim. Acta, 52(2007), p. 6793.
Sanaa A. Abo El-Enin, Omar E. Abdel-Salam, Hammam El-Abd, and Ashraf M. Amin, New electroplated aluminum bipolar plate for PEM fuel cell, J. Power Sources, 177(2008), p. 131.
H. L. Wang, M. A. Sweikart, and J. A. Turner, Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells, J. Power Sources, 115(2003), p. 243.
S. Lee, J. Lai, and C. Huang, Stainless steel bipolar plates, J. Power Sources, 145(2005), p. 362.
J. Wind, R. Späh, W. Kaiser, and G. Böhm, Metallic bipolar plates for PEM fuel cells, J. Power Sources, 105(2002), p. 256
A. S. Gago, S. A. Ansar, B. Saruhan, U. Schulz, P. Lettenmeier, N. A. Cañas, P. Gazdzicki, T. Morawietz, R. Hiesgen, J. Arnold, and K. A. Friedrich, Protective coatings on stainless steel bipolar plates for proton exchange membrane (PEM) electrolysers, J. Power Sources, 307(2016), p. 815.
H. B. Zhang, G. Q. Lin, M. Hou, L. Hu, Z. Y. Han, Y. Fu, Z. G. Shao, and B. L. Yi, CrN/Cr multilayer coating on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells, J. Power Sources, 198(2012), p. 176.
Y. Fu, M. Hou, G. Q. Lin, J. B. Hou, Z. G. Shao, and B. L. Yi, Coated 316L stainless steel with CrxN film as bipolar plate for PEMFC prepared by pulsed bias arc ion plating, J. Power Sources, 176(2008), p. 282.
C. Shanmugham and N. Rajendran, Corrosion resistance of poly p-phenylenediamine conducting polymer coated 316L SS bipolar plates for proton exchange membrane fuel cells, Prog. Org. Coat., 89(2015), p. 42.
S. H. Lee, N. Kakati, J. Maiti, S. H. Jee, D. J. Kalita, and Y. S. Yoon, Corrosion and electrical properties of CrN- and TiN-coated 316L stainless steel used as bipolar plates for polymer electrolyte membrane fuel cells, Thin Solid Films, 529(2013), p. 374.
Y. Zhao, L. Wei, P. Y. Yi, and L. F. Peng, Influence of Cr?C film composition on electrical and corrosion properties of 316L stainless steel as bipolar plates for PEMFCs, Int. J. Hydrogen Energy, 41(2016), p. 1142.
M. C. Li, C. L. Zheng, S. Z. Luo, J. N. Shen, H. C. Lin, and C. N. Cao, Electrochemical corrosion characteristics of type 316 stainless steel in simulated anode environment for PEMFC, Electrochim. Acta, 48(2003), p. 1735.
S. H. Lee, V. E. Pukha, V. E. Vinogradov, N. Kakati, S. H. Jee, S. B. Cho, and Y. S. Yoon, Nanocomposite-carbon coated at low-temperature: a new coating material for metallic bipolar plates of polymer electrolyte membrane fuel cells, Int. J. Hydrogen Energy, 38(2013), p. 14284.
C. Chung, S. Chen, P. Chiu, M. Chang, T. Hung, and T. Ko, Carbon film-coated 304 stainless steel as PEMFC bipolar plate, J. Power Sources, 176(2008), p. 276.
M. M. Sisan, M. A. Sereshki, H. Khorsand, and M. H. Siadati, Carbon coating for corrosion protection of SS-316L and AA-6061 as bipolar plates of PEM fuel cells, J. Alloys Compd., 613(2014), p. 288.
K. Feng, Z. G. Li, H. L. Sun, L. Yu, X. Cai, Y. X. Wu, and P. K. Chu, C/CrN multilayer coating for polymer electrolyte membrane fuel cell metallic bipolar plates, J. Power Sources, 222(2013), p. 351.
P. Lang, H. F. Xu, M. Liu, L. Lu, and J. Fu, Electrochemical performance testing and characterization of Silver-plated and graphite-coated 316L stainless steel bipolar plates, Acta Phys. Chim. Sin., 26(2010), No. 3, p. 595.
V. V. Nikam and R. G. Reddy, Corrosion studies of a copper- beryllium alloy in a simulated polymer electrolyte membrane fuel cell environment, J. Power Sources, 152(2005), p. 146.
K. M. Emran, S. T. Arab, A. M. Al-Turkustani, and H. A. Al-Turaif, Temperature effect on the corrosion and passivation characterization of Ni82.3Cr7Fe3Si4.5B3.2 alloy in acidic media, Int. J. Miner. Metall. Mater., 23(2016), No. 2, p. 1.
M. Liu, X. M. Zhu, and Y. S. Zhang, Effect of initial transpassive treatment on properties of passive film formed on Fe-Mn-Al-Cr alloy, Corros. Eng. Sci. Technol., 48(2013), p. 36.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, M., Xu, Hf., Fu, J. et al. Conductive and corrosion behaviors of silver-doped carbon-coated stainless steel as PEMFC bipolar plates. Int J Miner Metall Mater 23, 844–849 (2016). https://doi.org/10.1007/s12613-016-1299-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-016-1299-8