Skip to main content
Log in

Research of {0001} crystal orientation for magnesium alloys solidified in a fashion of cellular crystals

  • Published:
International Journal of Minerals, Metallurgy, and Materials Aims and scope Submit manuscript

Abstract

The magnesium alloy grew in a fashion of cellular crystals during the process of unidirectional solidification, and the {0001} crystal face orientation in the cast ingot of the magnesium alloy was studied. The theoretical model and methodology were set up, and a corresponding experiment was carried out to verify the theoretical analysis results. The experimental results indicate that the {0001} crystal face of magnesium crystals parallels to the width direction for the thin-plate cast ingot when the magnesium grows in a manner of cellular crystals. The separation angle between the {0001} crystal face of magnesium crystals and the vertical axis line of the cast ingot is about 62° for the circular column cast ingot, which distributes in cone-type. The theoretical analysis results are basically in agreement with the experimental ones of previous literatures and this paper.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. G.W. Chang, C. Zhou, S.Y. Chen, et al., Relationships of the solid-liquid interface and the crystal orientation for pure magnesium solidified in fashion of cellular crystal, Trans. Nonferrous Met. Soc. China, 20(2010), No.2, p.289.

    Article  Google Scholar 

  2. Y.B. Li, J.F. Huang, H. Cui, et al., Characterization of microstructure evolution and mechanical properties of the spray-deposited AZ31 magnesium alloy, J. Univ. Sci. Technol. Beijing, 15(2008), No.6, p.740.

    Article  Google Scholar 

  3. S.K. Das and C.F. Chang, Magnesium Alloys and Their Applications, DGM Information Sgesellschaft, Oberursel, 1992, p.56.

    Google Scholar 

  4. E.F. Emley, Principles of Magnesium Technology, Pergamon, Oxford, 1966, p.122.

    Google Scholar 

  5. K. Kurota, M. Mabuchi, and K. Higashi, Review processing and mechanical properties of fine-grained magnesium alloys, J. Mater. Sci., 34(1999), p.2255.

    Article  Google Scholar 

  6. G. Feng, H.S. Yu, L. Zhang, et al., Structure refinement approaches of magnesium alloys, Mater. Rev., 18(2004), No.10, p.41.

    Google Scholar 

  7. Z.L. Liu, Y.F. Shen, Z.Q. Li, et al., Review of the grain refinement technology of cast magnesium alloys, J. Mater. Sci. Eng., 22(2004), No. 1, p.146.

    Google Scholar 

  8. H.B. Zhang, Q.J. Zhai, F.P. Qi, and Y.Y. Gong, Effect of side transmission of power ultrasonic on structure of AZ81 magnesium alloy, Trans. Nonferrous Met. Soc. China, 14(2004), No. 2, p.302.

    Google Scholar 

  9. B.C. Yang, D.C. Du, X.X. Zhu, et al., Effects of electromagnetic stirring on microstructure of Mg-Al-Si alloy, Spec. Cast. Nonferrous Alloys, 2004, No.3, p.26.

  10. Y. Mizutani, T. Tamura, and K. Miwa, Microstructural refinement process of pure magnesium by electromagnetic vibrations, Mater. Sci. Eng. A, 413–414(2005), p.205.

    Article  Google Scholar 

  11. C.F. Feng, X.G. Zhang, S.H. Ji, et al., Microstructure and corrosion property of AZ61 Magnesium alloy by electromagnetic stirring, Trans. Nonferrous Met. Soc. China, 15(2005), No.3, p.536.

    Google Scholar 

  12. W.M. Mao, Z.S. Zhen, and H.T. Chen, Microstructure of semi-solid AZ91D alloy solidified during electromagnetic stirring, Chin. J. Mater. Res., 19(2005), No.3, p.303.

    Google Scholar 

  13. Q. Zhou, Y.S. Yang, J.L. Tang, and Z.Q. Hu, Microstructure evolution of magnesium alloy AZ91D prepared by electric current pulse discharge during partial remelting, China Nonferrous Met., 16(2006), No.8, p.1417.

    Google Scholar 

  14. S.J. Guo, Q.C. Le, Z.H. Zhao, et al., Effect of the low frequency electromagnetic field on the direct-chill (DC) casting of AZ80 magnesium alloy ingots, Int. J. Mater. Res., 97(2006), No.11, p.1539.

    Article  Google Scholar 

  15. Y.S. Yang, Q. Zhou, J.L. Tang, and Z.Q. Hu, Effect of partial remelting on microstructure of semi-solid magnesium alloy AZ91D prepared by electric current pulse, [in] 2nd International Conference on Magnesium, Beijing, 2006, p.6.

  16. B. Wang, Y.S. Yang, J.X. Zhou, et al., Microstructure refinement of AZ91D alloy solidified with pulsed magnetic field, Trans. Nonferrous Met. Soc. China, 18(2008), No.3, p.536.

    Article  Google Scholar 

  17. P. Hartman, Crystal Growth, North Holland, Amsterdam, 1973, p.35.

    Google Scholar 

  18. S. Onaka, H. Kato, S. Hashimoto, et al., Crystal orientation and yield strength of pure magnesium continuously cast with a heated mold, J. Jpn. Inst. Met., 59(1995), No.6, p.607.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Guo-wei Chang.

Additional information

This work was financially supported by the Outstanding Innovation Team in Colleges and Universities of the Education Department of Liaoning Province, China (No.2007T078) and Liaoning Natural Science Foundation (No.20092197).

Rights and permissions

Reprints and permissions

About this article

Cite this article

Chang, Gw., Chen, Sy., Li, Qc. et al. Research of {0001} crystal orientation for magnesium alloys solidified in a fashion of cellular crystals. Int J Miner Metall Mater 19, 136–140 (2012). https://doi.org/10.1007/s12613-012-0528-z

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12613-012-0528-z

Keywords

Navigation