Advertisement

Rare Metals

pp 1–7 | Cite as

Microstructure and mechanical properties of WC–Co-based cemented carbide with bimodal WC grain size distribution

  • Rui-Jun Cao
  • Chen-Guang Lin
  • Xing-Cheng Xie
  • Zhong-Kun Lin
Article
  • 144 Downloads

Abstract

In order to improve the wear resistance of coarse-grained WC–Co cemented carbides, the fine WC powder were used to reinforce the metallic binder. These WC–Co-based cemented carbides having bimodal WC grain size distributions were synthesized by liquid phase sintering. For comparison, the cemented carbides having unimodal WC grain size distributions were synthesized. The microstructure, hardness, fracture toughness and wear resistance of these cemented carbides were investigated. The results show that adding fine WC powder is an effective method to improve the wear resistance of coarse-grained WC–Co cemented carbides. The WC size, mean free path and fracture toughness decrease with the addition of fine WC powder, while the hardness exhibits an opposite trend. The impact-wear coefficient of bimodal distribution cemented carbides is noticeably lower than that of the unimodal one with the same hardness, which means that the cemented carbides with bimodal grain structure have better combination of hardness and impact-abrasive wear resistance. The impact-abrasive wear mechanism of the bimodal cemented carbides is that the fine WC grains prevent abrasive wear and the coarse WC grains prevent impact wear.

Keywords

WC–Co cemented carbide Impact wearing Bimodal distribution Hardness Mean free path 

Notes

Acknowledgements

This study was financially supported by the National Natural Science Foundation of China (No. 51101021).

References

  1. [1]
    Saito H, Iwabuchi A, Shimizu T. Effects of Co content and WC grain size on wear of WC cemented carbide. Wear. 2006;261(2):126.CrossRefGoogle Scholar
  2. [2]
    Gee MG, Gant A, Roebuck B. Wear mechanisms in abrasion and erosion of WC/Co and related hardmetals. Wear. 2007;263(1):137.CrossRefGoogle Scholar
  3. [3]
    Konyashin I, Ries B. Wear damage of cemented carbides with different combinations of WC mean grain size and Co content. Part II. Laboratory performance tests on rock cutting and drilling. Int J Refract Met Hard Mater. 2014;45:230.CrossRefGoogle Scholar
  4. [4]
    Wang W, Lu ZC, Chen ZH, Zeng MQ, Wang H, Zhu M. Properties of WC–8Co hardmetals with plate-like WC grains prepared by plasma-assisted milling. Rare Met. 2016;35(10):763.CrossRefGoogle Scholar
  5. [5]
    Sun L, Yang T, Jia C, Xiong J. Effects of graphite on the microstructure and properties of ultrafine WC–11Co composites by spark plasma sintering. Rare Met. 2011;30(1):63.CrossRefGoogle Scholar
  6. [6]
    Beste U, Jacobson S. A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons. Wear. 2008;264(11–12):1129.CrossRefGoogle Scholar
  7. [7]
    Torres Y, Tarrago JM, Coureaux D, Tarrés E, Roebuck B, Chan P, James M, Liang B, Tillman M, Viswanadham RK, Mingard KP, Mestra A, Llanes L. Fracture and fatigue of rock bit cemented carbides: mechanics and mechanisms of crack growth resistance under monotonic and cyclic loading. Int J Refract Met Hard Mater. 2014;45:179.CrossRefGoogle Scholar
  8. [8]
    Norgren S, García J, Blomqvist A, Yin L. Trends in the P/M hardmetal industry. Int J Refract Met Hard Mater. 2015;48:31.CrossRefGoogle Scholar
  9. [9]
    Konyashin I, Ries B, Lachmann F. Near-nano WC–Co hardmetals: will they substitute conventional coarse-grained mining grades? Int J Refract Met Hard Mater. 2010;28(4):489.CrossRefGoogle Scholar
  10. [10]
    Yang GJ, Gao PH, Li CX, Li CJ. Simultaneous strengthening and toughening effects in WC-(nano WC–Co). Scr Mater. 2012;66(10):777.CrossRefGoogle Scholar
  11. [11]
    Liu C, Lin N, He Y, Wu C, Jiang Y. The effects of micron WC contents on the microstructure and mechanical properties of ultrafine WC-(micron WC–Co) cemented carbides. J Alloys Compd. 2014;594(4):76.CrossRefGoogle Scholar
  12. [12]
    Yang Q, Yang J, Yang H, Ruan J. The effects of fine WC contents and temperature on the microstructure and mechanical properties of inhomogeneous WC-(fine WC–Co) cemented carbides. Ceram Int. 2016;42(16):18100.CrossRefGoogle Scholar
  13. [13]
    Liu C, Lin N, He YH, Wang YC, Zhang X. Effect of coarse grained WC addition on microstructure and mechanical properties of WC–Co cemented carbide. Mater Sci Eng Powder Metall. 2014;19(1):123.Google Scholar
  14. [14]
    Chen SY, Zhang JX, Zhou SZ. Effect of the matching of coarse and fine WC powders on the mechanical properties and microstructures of WC–10%Co cemented carbides. Cem Carbide. 1994;11(3):138.Google Scholar
  15. [15]
    Schubert WD, Neumeister H, Kinger G, Lux B. Hardness to toughness relationship of fine-grained WC–Co hardmetals. Int J Refract Met Hard Mater. 1998;16(2):133.CrossRefGoogle Scholar
  16. [16]
    Du X, Wang J, Sun G, Man D. Effect of composition on impact-wear behavior of alloyed liner steels in corrosive condition. Mater Sci Eng A. 2008;477(1):277.CrossRefGoogle Scholar
  17. [17]
    Wang K, Du X, Youn K, Hayashi Y, Lee C, Koo B. Effect of impact energy on the impact-wear properties of low carbon high manganese alloy steels in corrosive conditions. Met Mater Int. 2008;14(6):689.CrossRefGoogle Scholar
  18. [18]
    Delano A, Lay S. Evolution of the WC grain shape in WC–Co alloys during sintering: effect of C content. Int J Refract Met Hard Mater. 2009;27(1):140.CrossRefGoogle Scholar
  19. [19]
    Lay S, Allibert CH, Christensen M, Wahnström G. Morphology of WC grains in WC–Co alloys. Mater Sci Eng A. 2008;486(1–2):253.CrossRefGoogle Scholar
  20. [20]
    Fang Z, Maheshwari P, Wang X, Sohn HY, Griffo A, Riley R. An experimental study of the sintering of nanocrystalline WC–Co powders. Int J Refract Met Hard Mater. 2005;23(4–6):249.CrossRefGoogle Scholar
  21. [21]
    Shatov AV, Firstov SA, Shatova IV. The shape of WC crystals in cemented carbides. Mater Sci Eng A. 1998;242(1–2):7.CrossRefGoogle Scholar
  22. [22]
    Yoon BK, Lee BA, Kang SJL. Growth behavior of rounded (Ti, W)C and faceted WC grains in a Co matrix during liquid phase sintering. Acta Mater. 2005;53(17):4677.CrossRefGoogle Scholar
  23. [23]
    Sun Y, Su W, Yang H, Ruan J. Effects of WC particle size on sintering behavior and mechanical properties of coarse grained WC–8Co cemented carbides fabricated by unmilled composite powders. Ceram Int. 2015;41(10):14482.CrossRefGoogle Scholar
  24. [24]
    Lee HC, Gurland J. Hardness and deformation of cemented tungsten carbide. Mater Sci Eng. 1978;33(1):125.CrossRefGoogle Scholar
  25. [25]
    Roebuck B. Terminology, testing, properties, imaging and models for fine grained hardmetals. Int J Refract Met Hard Mater. 1995;13(5):265.CrossRefGoogle Scholar
  26. [26]
    Lancaster JK. The influence of substrate hardness on the formation and endurance of molybdenum disulphide films. Wear. 1967;10(2):103.CrossRefGoogle Scholar
  27. [27]
    Konyashin I, Schäfera F, Cooper R, Ries B, Mayer J, Weirich T. Novel ultra-coarse hardmetal grades with reinforced binder for mining and construction. Int J Refract Met Hard Mater. 2005;23(4–6):225.CrossRefGoogle Scholar
  28. [28]
    Jia K, Fischer TE. Abrasion resistance of nanostructured and conventional cemented carbides. Wear. 1996;200(1–2):206.CrossRefGoogle Scholar
  29. [29]
    Pirso J, Letunovits S, Viljus M. Friction and wear behaviour of cemented carbides. Wear. 2004;257(3–4):257.CrossRefGoogle Scholar
  30. [30]
    Gant AJ, Gee MG. Abrasion of tungsten carbide hardmetals using hard counterfaces. Int J Refract Met Hard Mater. 2006;24(1):189.CrossRefGoogle Scholar
  31. [31]
    Gant AJ, Gee MG, Roebuck B. Rotating wheel abrasion of WC/Co hardmetals. Wear. 2005;258(1–4):178.CrossRefGoogle Scholar
  32. [32]
    Engqvist H, Axén N. Abrasion of cemented carbides by small grits. Tribol Int. 1999;32(9):527.CrossRefGoogle Scholar

Copyright information

© The Nonferrous Metals Society of China and Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Powder Metallurgy and Special Materials DepartmentGeneral Research Institute for Nonferrous MetalsBeijingChina

Personalised recommendations